DJI Wanda
Administrator
Offline
|
Hello, there. Sorry for the inconvenience. Would you please check the information below and see whether it can resolve your issue?
1. When using the HDMI port on the main body:
The HDMI port on the main body supports an output of up to 4:2:0 8-bit C4K (4096×2160) 60fps when recording at 4K.
When recording at other resolutions, it supports an output of up to 4:2:0 8-bit 2048×1080 60fps.
When recording at a frame rate of 72, 96, 100 or 120fps, the output frame rate of the HDMI port is dynamic, and consistent with the project frame rate.
The HDMI output format is RGB888 8-bit.
2. When using the DJI Ronin 4D Expansion Plate (SDI/XLR/TC) port:
The maximum video resolution and frame rate can be 1920×1080 60fps.
When recording at a frame rate of 72, 96, 100 or 120fps, the output frame rate of the SDI-output port is dynamic, and consistent with the project frame rate.
The DJI Ronin 4D Expansion Plate (SDI/XLR/TC) does not support 1920×1080p 48fps, so their frame rates will adapt to 50fps for output when the project frame rate is 48fps. |
|