after updating Phantom 3 and info in log that all was successful I have following situation:

looks that I'm downgraded to 1.1.5

remote was not updated - confirmed in log file.

Overall status looks like this:

should I try again? I'm not so sure ;)

I cannot apply the same 1.2.8 package again,
this is what I get in log file:

Result: Success.

========== 2015.06.16 19:37:46 =====================
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.02.0008.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

i had that same thing all i did was turn everything of then powered back up again now its ok very weird ;)

bomberuk Posted at 2015-6-18 19:30
i had that same thing all i did was turn everything of then powered back up again now its ok very we ...

OMG, on my side two restarts and I was in the kitchen also ;)
don't know what helped but works good now

another restart and issue is still there ...

looks like random behavior,

sometimes I have message that firmware is ok ... sometimes that I have to update,

cannot update as 1.2.8 installed.

Br,

musman1978 Posted at 2015-6-18 19:49
another restart and issue is still there ...
looks like random behavior,sometimes I have message tha ...

OMG what a mess

DESPERATION FROM DJI TO MUCH TO FAST

ok issue looks resolved now,
on DJI app can see now 1.2.8 so maybe DJI updated some services where DJI pilot confirms versions.

use another device it will resolve the problem im using android note 4 after changing ti ios I phone 6 plus no issue.

Hello bigjim.