Hi, I have p3 4k. Flew out of box with out problems, on dji go it showed that I have to update. I wanted to try it out so I didnt update. Next time I updated it via app. Didnt check that txt file right away but everything looked normal no beeping or red lights. But now I lose live video on my phone after 20m + I have to keep it in place myself kinda. I dont know is that because of the wind, first time it was kinda windy but it was easy to fly. So I dont know if thats because of the update or not. I checked that txt file too, it says success but version is 99.99999.9 or something. All the numbers are 9. It should take 30 mins to update but I think mine took about 10mins. Update available notice is gone from the app.

Edit: When it loses that live video its returning to home. And on app it notices me that im on beginner mode when I get my live video back. Im on beginner mode but copter is already in the sky so yeah I know im using it. Mby it loses rc connection too, because of the RTH, I dont really wanna fly it for now to check it out. And the recorded video is laggy, not the whole video but I think its laggy when its trying to get the connection.

Please open the Go app with drone and RC on, and under About, see which firmware versions are actually installed. Thanks.

RedHotPoker

App 2.8.1 im checking it with android but i fly with iphone
Version 1.5.40

Hello kaarelkostabi,
1.Did the app say upgrade succeed after the process finished? You can also post the LOG file here by these steps:
1. Enable the option of viewing hidden files in your OS. Below are the websites where you can check how to show the hidden files in your PC.
For The Windows System:
http://windows.microsoft.com/en- ... den-files=windows-7
For The Mac System:
http://ianlunn.co.uk/articles/qu ... mac-os-x-mavericks/
2.Enter the root directory of the SD card, then find the hidden folder MISC and enter it. There is LOG folder in it.
3.The LOG txt file is under the LOG folder.

2.For the range and connection issue, try to relink the RC and drone and adjust the antenna by this video tutorial:

[00147980]========== remo-con disconnect. boot(15) ============
[00148130]Packet [C:\P3XW_FW_V99.99.9999.bin] detected, card sn [0x0022a353].
[00148179]Packet upgrade start...

[00148234]Packet checking...
[00148278]Packet vlink 01.05.0040 <-> 01.04.0030.
[00148358]Done.

[00148409]Version checking[1]...
[00148458][01 00][00] v1.2.4935 -> v1.2.4935
[00148504][01 01][00] v1.2.4935 -> v1.2.4935
[00148559][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00148648][03 05][00] v34.2.0.9 -> v34.2.0.9
[00148732][03 06][00] v2.4.15.5 -> v2.4.15.5
[00148817][09 00][00] v0.1.0.12 -> v0.1.0.12
[00148928][12 00][00] v5.9.0.0 -> v5.9.0.0
[00149048][12 01][00] v5.9.0.0 -> v5.9.0.0
[00149153][12 02][00] v5.9.0.0 -> v5.9.0.0
[00149232][12 03][00] v5.9.0.0 -> v5.9.0.0
[00149349][11 00][00] v2.0.0.32 -> v1.8.0.0, firmware v2.0.0.32 not support.
[00149396][11 00][00] v2.0.0.32 -> v1.8.0.0
[00149509][11 01][00] v2.0.0.32 -> v2.0.0.32
[00149559]Done.

[00151605]Waiting for user confirm...
[00161648]Timeout, start upgrade automatically.

[00161739]Firmware upgrading[1]...
[00161862][04 00] Firmware upgrade start...
[00221001][04 00] Firmware upgrade finished successfully.
[00221051]Done.

[00221099]Version checking[2]...
[00221150][01 00][00] v1.2.4935 -> v1.2.4935
[00221194][01 01][00] v1.2.4935 -> v1.2.4935
[00221259][04 00][05] v1.44.0.0 -> v1.44.0.0
[00221355][03 05][00] v34.2.0.9 -> v34.2.0.9
[00221433][03 06][00] v2.4.15.5 -> v2.4.15.5
[00221498][09 00][00] v0.1.0.12 -> v0.1.0.12
[00221606][12 00][00] v5.9.0.0 -> v5.9.0.0
[00221708][12 01][00] v5.9.0.0 -> v5.9.0.0
[00221840][12 02][00] v5.9.0.0 -> v5.9.0.0
[00221952][12 03][00] v5.9.0.0 -> v5.9.0.0
[00222055][11 00][00] v2.0.0.32 -> v1.8.0.0, firmware v2.0.0.32 not support.
[00222102][11 00][00] v2.0.0.32 -> v1.8.0.0
[00222252][11 01][00] v2.0.0.32 -> v2.0.0.32
[00222296]Packet upgrade finish successfully.

I think its the file youre looking for but it wasnt hidden. And there arent any hidden files on sd
Edit: Is that odd if I have under mc settings "enable multiple flight mode" off on android but I dont have that option at all on iphone ? Anyway I turned that on, mby thats why it wasnt hovering on spot ( I dont really know how to say it in any languages). Oh and I just saw that camera status indicator is flashing red, is that ok ? (Prob. not) If it needs another update then where do I get to download it, theres only for adv and pro. Or is it like standard only via app ?

Never mind that flashing red light, I dont have memeorycard in it right now  :doh:

Anyone ?

And is that latest fw for 4k ?

I have the same issue, did you solve it?