DJI AnnouncingThe New DJI E310 and E800 Tuned Propulsion Systems DJI has released E310 and E800 Tuned Propulsion Systems for multirotors. These advanced motor packages represent the latest generation of propulsion systems and have been fine-tuned to deliver excellent performance for a range of platforms. E800 Motor Package The E310 Tuned Propulsion System was designed for multirotors with a diagonal wheel base of 330mm-350mm, and the E800 Tuned Propulsion System was designed for multirotors weighing 3kg-5kg.   E310 Motor Package Both systems feature single-strand winding technology in the motors for unparalleled power and consistency, aerodynamically designed Z-blade propellers, and Smart ESCs. E800 Motors The Smart ESCs reduce power consumption, enhance maneuverability, and provide two-way communication between the aircraft and the pilot. Now, the pilot can receive diagnostic and performance information on their motors in real time. E800 ESC These performance advances are accompaniedby new spark-proof circuitry that make the E310 and E800 safer, more reliable,and more durable. Upgrading your system to the E310 or E800is quick and easy, with plug-and-go functionality enabling you to get in the air right away. For more information, please visit: http://www.dji.com/product/e310 http://www.dji.com/product/e800

I should have the E310 System Tuesday 02-10-15. Looking forward to checking it out.

blackanthem Posted at 2015-2-7 22:57
I should have the E310 System Tuesday 02-10-15. Looking forward to checking it out.

Let us know your experience

Have had just a few minutes to go over the E310 Package. My first impression is, the motor windings are a work of art. There beautiful.

Just received my e800 x6 package today. They look great. Can't wait for the frame to arrive to get it up in the air.

ive the 310 here and the e800
these are exceptionally well built kits and the level of detail is to be admired.

job well done DJI

and congrats on getting 3rd place on the worlds top 10 most innovative companies
well deserved

Nice motors, and best propellers I've ever seen

How does one get the information back in realtime from the ESC's?

Has anyone found the specs on motor mounting screw hole spacing?

nick.soefje.gma Posted at 2015-2-13 00:12
Has anyone found the specs on motor mounting screw hole spacing?

NM, I found them.......

does anyone else experience startup noises that are almost like w whining noise?  it goes away just before the beep sequence.

Also, is anyone else not able to get the new E310 powerset to spin each motor individually using the naza assistant software?
here is a video I uploaded wchich shows the issues im talking about:

What do you recommend gain values for the Tuned Propulsion System E310 Motorset and the Naza v2 on a F550 Flameweel.

knarfboy Posted at 2015-3-6 10:31
What do you recommend gain values for the Tuned Propulsion System E310 Motorset and the Naza v2 on a ...

My recommendation:
Basic Gain:
Pitch: 140   Roll: 140   Yaw: 90   Vertical: 95
Attitude Gain:
Pitich: 150   Roll: 150

Recommend gain setting has no direct relationship to the motor & ESC, but has more to do with Flight Controller and Frame.

The E310 User Manual v1.0 say's on Page 2 (FC A2):
Basic Gain:
Pitch: 40%  Roll: 40% Yaw: 60% Vertical 100%
Attitude Gain:
Pitch: 160%  Roll: 160%

This Basic values must be wrong.

The E310 User Manual say's the new E310 ESC's don't use square wave drive. The news ESC generation use sinus wave and need other Gain values.

Hi,

I would like to use the prop used on the E800, I was able to purchase it tough on dealer.
But where can I find the prop lock system on the E800 motor ?
It's to be used in the Inspire 1, to have carbon Prop and Prop lock built-in on the motor directly.
If new ideas, welcome

Regards

Nicolas

wkderf@gmail.co Posted at 2015-3-4 03:09
does anyone else experience startup noises that are almost like w whining noise?  it goes away just  ...

I had the same problem.

nscheffer Posted at 2015-3-22 15:31
Hi,

I would like to use the prop used on the E800, I was able to purchase it tough on dealer.

how are the e800 working with your inspire 1/ was it difficult to replace????

nscheffer Posted at 2015-3-22 15:31
Hi,

I would like to use the prop used on the E800, I was able to purchase it tough on dealer.

how are the e800 working with your inspire 1/ was it difficult to replace????

JKT Posted at 2015-5-10 07:01
how are the e800 working with your inspire 1/ was it difficult to replace????

In fact i didn't replace the motor but just purchase the Props and the quick release motor adapter to be mounted on the motor. I also receive a free from DJI who are really better than the old prop and the temporary prop lock...
You can purchase it directly on DJI store or any dealer :
http://store.dji.com/tuned-propulsion-system/e800

My recommandation is to use only DJI product !

At the end it's a huge difference, easy and more safe !

nscheffer Posted at 2015-5-11 03:17
In fact i didn't replace the motor but just purchase the Props and the quick release motor adapter  ...

oh ok, I thought you where buying the actual motors. I actually got my prop and quick release from DJI.. but the same day that I got them I installed the prop and went to fly my bird and almost lost my bird so I dont know if it was the props or the firmware update (previous). they ask me to sent them my inspire 1 so I do t know yet what cause the problem. but thanks for your reply.

DJI-Autumn Posted at 2015-2-11 20:21
Nice motors, and best propellers I've ever seen

what gain do you recommend for NAZA V2 payload of 3kg

DJI-Autumn Posted at 2015-2-11 20:21
Nice motors, and best propellers I've ever seen

what gain do you recommend for NAZA V2 payload of 3kg