Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal facing downwards
2373 4 2017-6-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
fansceff17c6
Second Officer
Flight distance : 1834360 ft
  • >>>
Croatia
Offline

After gimbal ribbon cable replacement, camera is allways facing downwards.

Did all updates and calibrations, only gimbal calibration fails.

Every 5th or 6th turning on, the gimbal direction is ok.
Gimbal can move freely in all directions.

Any suggestions?

2017-6-28
Use props
Kim5
New
Flight distance : 34219 ft
Denmark
Offline

sounds like a loose connection
2017-6-28
Use props
fansceff17c6
Second Officer
Flight distance : 1834360 ft
  • >>>
Croatia
Offline

I just re-assembled the gimbal and the lower part of the drone where the ribbons from the gimbal are comming. All connectors seem fine.

After booting it just points downwards...
2017-6-28
Use props
gregory young
lvl.1
Flight distance : 38284 ft
New Zealand
Offline

fansceff17c6 Posted at 2017-6-28 03:39
I just re-assembled the gimbal and the lower part of the drone where the ribbons from the gimbal are comming. All connectors seem fine.

After booting it just points downwards...

I had the same issue.

Try this.

With the aircraft turned off, see if the lens can rotate freely one or two millimeters. if not it may not be in its neutral position. You then rotate it slightly left or right to get it into its neutral position. You will feel it freely rotate in both directions either way. turn on aircraft and hopefully it centers up correctly.

2017-7-10
Use props
fansceff17c6
Second Officer
Flight distance : 1834360 ft
  • >>>
Croatia
Offline

gregory young Posted at 2017-7-10 23:18
I had the same issue.

Try this.

Thnx Gregory, but I tried it allready with no success.

The Mavic went back to service.
2017-7-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules