Does anyone know the process of putting all 16 LB channels on to a single Futaba transmitter? The Futaba is custom made with an extra joystick on the back plate for gimbal tilt and pan controls. The purpse is so I can still film while my camera operator is indiposed.

I have gone through the user manual PDF, and nothing there is helpful at all.


Much Thanks


EDIT: Also, I know I will have only limited camera function, I just need shutter and tilt and pan.

The 14SG can only use 12 or 14 channels.  Right now the LB only recognizes 12 channels.  My BMPCC is set up as follows:

Channel        Control        Function
1        J1        Aileron
2        J2        Elevator
3        J3        Throttle
4        J4        Rudder
5        SF        Gear
6        SG        IOS
7 - Aux 5        SE        Mode
8 - Aux 4        SH        RTH
9 - Aux 2        SD        Record
10 - Aux 3        SC        Iris
11 - Aux 1        RS        Tilt
12 - Aux 6        SA        Camera Mode

I hope this helps you.

Tahoe_Ed Posted at 2014-10-24 21:10
The 14SG can only use 12 or 14 channels.  Right now the LB only recognizes 12 channels.  My BMPCC is ...

The issue im having is that lightbridge will not recognize the extra channels..

How do you have your Tx set up in trainer?

Tahoe_Ed Posted at 2014-10-24 21:28
How do you have your Tx set up in trainer?

Yeah, I build about 5 DJI units a week for my company so I know how they work pretty well... this is just the first client who wants to use a modified futaba

zreeder21@gmail Posted at 2014-10-24 22:42
Yeah, I build about 5 DJI units a week for my company so I know how they work pretty well... this  ...

Right now you are limited to 12 channels.  

Tahoe_Ed Posted at 2014-10-25 01:17
Right now you are limited to 12 channels.

Yes, but how do I get the LB to let me use the 12 on only one Futbaba?

Right now you are limited to 8 channels for RC control and 8 for gimbal control.  It has been like that since the Lightbridge Assistant was introduced.