Does anyone know if the Phantom Vision 2+ 9450 Props the same as the props on the P3? I sold my P2+ and still have alot of 9450 props left. Ordered the P3 and was hoping the props were then same.

That's a lot of props!

They have different hubs.  The P3 hubs have a higher coefficient of friction than the P2.  It is because of the esc braking to the motors similar to the Inspire but not as aggressive.  That is why the P3 does not require prop locks.

Have a few sets as well from the P2V+. So they just wont fit at all?, or the risk using them too high?

Tahoe_Ed Posted at 2015-4-18 10:04
They have different hubs.  The P3 hubs have a higher coefficient of friction than the P2.  It is bec ...

Thanks Ed for the info. Guess I have some 9450 Props to Sell

Tahoe_Ed Posted at 2015-4-18 10:04
They have different hubs.  The P3 hubs have a higher coefficient of friction than the P2.  It is bec ...

does this mean there is less of a chance of having the props fly off mid flight like some p2 owners are having?

Jerdel Posted at 2015-4-18 21:58
does this mean there is less of a chance of having the props fly off mid flight like some p2 owner ...

Haven't had a prop fly off on my PV2+ The breaking on the P3 is like the Inspire1. It stops very quick. Thats why they made a design change for it