[size=14.3999996185303px]HI

[size=14.3999996185303px]I just install barnd new Lightbridge system on my s900 + Z15 for Gh4 .
[size=14.3999996185303px]This lightbridge works well on my phantom .
[size=14.3999996185303px]I conected the gimabl port to the zenmuze G7 and the bus cable to the A2 X2 port ,My Futaba 14sg was pluged to the ground unit .
[size=14.3999996185303px]The lightbridge send video feed to my iphone but no remote signal .
[size=14.3999996185303px]my monitor showes a red error on the left bottom currner "control signal lost"

[size=14.3999996185303px]image attached :

The signals icons are reversed.  You have control but no video.  How is your camera connected.  Is the video source in the App correct?

I dont get it when i work with the same settings binding directly to the A2 everything works great .
How come when it works under the lightbridge they are reversed ?
Where should i fix it ? A2 assistent ?
The video source for the camera is gimbal HDMi connector  .
The App Source is correct !

Please advice  

asi@double6stud Posted at 2014-11-19 11:36
I dont get it when i work with the same settings binding directly to the A2 everything works great . ...

the direction in the LB assistant do not matter.  Only those in A2 made a difference.

How should i fix it ?
when i log in to A2 assistant it wont show me the controller stick movement .
Its not connecting to the remote

I think i got
Totally forgot to change the A2 assistant setting from DR16 to Dbus



Thank you for trying