Please select Into the mobile phone version | Continue to access the computer ver.
Camera looks down after firmware update
1202 3 2014-11-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
tomasvarin
New

Argentina
Offline

Hi There, this is my fist post.

1) I bought a Phantm 2 Vision+ in Las Vegas (USA) and fly with no problem.
2) I bring to Buenos Aires (Argentina) and try to fly again (without any calibration)...
3) The Phantom fly crazy and crash. The gimbal camera was damage
4) After this crash, I can use the phantom and the camera with some small problems (like "Gimbal motor error"), and I have to loose a little some screws from the gimbal base so the gimbal arm doesn't touch the gimbal base.
5) It wasn't perfect, but I can use the phantom, film, move the camera. The only problem was that the camera was a liitle twisted, but that was the only big problem.
6) I connect the Phantom to PC and update the firmware
7) After update, I loose control on the camera. I cannot move anymore and if I activate the Camera gimbal control switch (the one that moves the camera with the movement of the phone), the camera looks dows and stays there. I cannot recover.

Here is a video that explain better the story: http://youtu.be/Yqc4URV1bcQ

- Does anybody know how to solve this?
- How can I go back to the original firmware? Is there a site where I can found old firmware release history?

Thanks!

Tomas

2014-11-30
Use props
gsp171
lvl.4

United States
Offline

http://www.phantompilots.com/viewtopic.php?f=39&t=30479
2014-11-30
Use props
Gerry1124
Captain

United States
Offline

gsp171@mchsi.co Posted at 2014-12-1 10:49
http://www.phantompilots.com/viewtopic.php?f=39&t=30479

I don't think that will help him now.  The gimbal has a bent backbone and the shaft that holds the camera level has twisted in the mount.  Sending it in for repair would be the only viable option.
2014-11-30
Use props
DJI-Julain
lvl.3

China
Offline

Hi I notice when you use the earth button the camera would face down and can't control eventually.

How about use the "up" "Down" button ,  Did it also cause the camera face down?

Over all,The camera need repair without doubt
2014-12-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules