A new firmware update (V1.5.0.30.) is nowavailable for the Inspire 1.

Please visit http://www.dji.com/product/inspire-1/info#downloads to download and update your Inspire 1.

Overview:

1.       All-in-One Firmware versionupdated to v1.5.0.30.

2.       DJI GO app iOS version updated to v2.4.2.

3.       DJI GO app Android version updated to v2.4.2.

What’s New:

1.       Fixed battery level fluctuation issue.

2.     The X3 gimbal on the Inspire 1 is now compatible with the Osmo. Note that you must attach X3 gimbal to the Inspire 1 before updating the firmware. Do not attach X3 gimbal to the Osmo to update the firmware.  

3.     Follow Me feature now supported in Intelligent Flight Mode.

4.     Optimized HDR performance.

5.     Adjusted video storage rate to 60Mbps at 1080p60, and 40 Mbps at 1080p30.

6.     Added a feature to smooth the pitch, roll and yaw movement of the X3 gimbal from the DJI GO app.

7.     Enforced read-only access for the data in the flight recorder.

8.     Optimized sampling methods forthe Vision Position System to improve its stability.

Notes:

1.       Hibernation and gimbal protectionis not supported on the Inspire 1 X3 gimbal.

2.     Battery firmware is included inthis All-in-One firmware update. Update all Intelligent Flight Batteries by using this firmware.

3.     The firmware can only be downgraded to v1.4.10 or later.

4.     Calibrate the Inspire 1 X3 gimbal when using it on the Osmo for the first time.

5.     Do not use this firmware to update the firmware of gimbal camera on the Osmo.

I have the new gimbal for the X5 on my Inspire and use both the X3 and X5 cameras on the Inspire1. Do I upgrade?

Great news Tim, but what is "Hibernation and Gimbal protection?"

finally it's here.

but i'd like to hear from other people first if their 'no signal' issue got fixed after they upgraded to this latest firmware ??? please please please do share your results.

waiting restlessly.

gboivin@msn.com Posted at 2015-12-7 17:34
I have the new gimbal for the X5 on my Inspire and use both the X3 and X5 cameras on the Inspire1. D ...

bro when you attach the x3 cam on the new gimbal, does it auto upgrade from its whatever version you have on it to the 1.1.0.40 latest version for the inspire1pro ? a screenshot of the status would be extremely helpful.

Does this update include the new GEO Fencing? or is it coming down the line? Thank you.

Hi. I a newbie to the inspire having just received inspire pro a few days ago so just spending some time getting used to setting it up dual controllers etc and ensuring all firmware is up to date.  There in lies my question?    I take it that I only do downloads and updates for the Inspire Pro?     E.g. Not those for the inspire ?

My  RC is telling me my system is now:

App.  2.4.2
Aircraft.  1.2.1.06+
RC. 1.5.70
Camera.   1.1.0.40


Is this all to the latest version?

Hope the wind drops so I can do a maiden flight!,,

Is this for the inspire pro too?

Admin, please delete this post, you answered my question on Facebook, thanks.

dopeytree Posted at 2015-12-7 18:34
Is this for the inspire pro too?

this is specifically & categorically for inspire 1 classic only. (for those with the x3 cam only)

Question on FOLLOW ME mode.    I have an iPad Air 2 NON cellular.  Does Follow Me rely on the location of the tablet or does the Follow me mode use the GPS in the transmitter?  

Dody Posted at 2015-12-7 14:00
after having gone thru a ton of upgrading issues i personally wouldnt feel comfortable going straig ...

Thanks for your suggestions.   I'm still confused as to whether the aircraft is updated to the correct most current level at.  1.2.1.06+.   Or should it be at.  V1.5.0.30

ian@consultfirs Posted at 2015-12-7 19:16
Thanks for your suggestions.   I'm still confused as to whether the aircraft is updated to the cor ...

at 1.2.1.06  . is it flying just fine / problem free ? if yes,,, then what's your prime reason to rush for the latest firmware ? :p just because it's out and available doesnt mean you should upgrade immediately. wait it out bro ... let others upgrade and see if it creates any problem. if your copter is flying just fine right now , go out, learn and practice and have fun ..... and leave the upgrade aside for some time

Dody Posted at 2015-12-7 14:29
at 1.2.1.06  . is it flying just fine / problem free ? if yes,,, then what's your prime reason to r ...

Thanks dody.      I understand your personal update concerns.  But that's not my question.   What your saying though is my inspire pro should  be at V1.5.0.30 ?


Is that DJI advice?

DJI Tim, DAVE, Tahoe-Ed anyone?

In the release notes, what does "Hibernation and gimbal protection is not supported on the Inspire 1 X3 gimbal" mean?

Many thanks

ian@consultfirs Posted at 2015-12-7 19:40
Thanks dody.      I understand your personal update concerns.  But that's not my question.   What  ...

my apologies for reading your post main post incorrectly.

the answer to your question is no.

gboivin@msn.com Posted at 2015-12-7 12:34
I have the new gimbal for the X5 on my Inspire and use both the X3 and X5 cameras on the Inspire1. D ...

Me to I have a Pro and use both the X3 and X5 cameras on my Inspire Pro

Arrow1969 Posted at 2015-12-7 20:15
Me to I have a Pro and use both the X3 and X5 cameras on my Inspire Pro

when you attach the x3 cam on the new gimbal, does it auto upgrade from its whatever version you have on it to the 1.1.0.40 latest version for the inspire1pro ? a screenshot of the status would be extremely helpful.

Dody Posted at 2015-12-7 16:29
at 1.2.1.06  . is it flying just fine / problem free ? if yes,,, then what's your prime reason to r ...

Before an official firmware release there is a pretty careful pre-beta and beta testing. When it gets to the general public, it has been tested already by several pilots from all over the world. The DJI beta testing is getting better with every new firmware, and there are a lot of good people, some of them members of this forum, who spent a great amount of time testing very careful and in detail the new firmwares, so you could upgrade safe and easy. Of course, nothing is perfect and for sure everything can be improved, but the general idea is that a public official firmware is pretty safe, at least for the last couple months.
Hope you'll find the courage to update, I had several flights with this firmware and everything went smooth, my bird is quite happy, in one piece

mani Posted at 2015-12-7 22:29
Before an official firmware release there is a pretty careful pre-beta and beta testing. When it g ...

what pisses me of now is that even after several months gone by since this 'no signal' issue lifted its head there has been not even one single genuine effort  by dji to resolve this matter, let alone any thread n these forums that would deal specifically & categorically with this matter. what is happening is that people are going with hits and trials and some are getting lucky while others are not.  which leaves me with my present opinion. i hope the experts are having great fun but i have been forced to cancel a  project for which i waited a whole year and now postponse paid projects untill i miraculously find a solution myself. even this latest firmware does not address the 'no signal' issue, so if someone expects me to try and upgrade and see if i get lucky .... uuuhhh ... i will only when i have no choice left.

Dji please confirm regarding ipro and x5 upgrades on v1 / v2 inspires. The app notified as an all in 1 upgrade and knows it's a ipro but others are saying this is x3 specific. What is the official word?

I1d Posted at 2015-12-7 18:05
Dji please confirm regarding ipro and x5 upgrades on v1 / v2 inspires. The app notified as an all in ...

That's the simple question I would like to know the answer to from dji
I have no problems with trusting dji on new firmware updates but as the owner of a new inspire pro am I using the most uptodate and compatible software?   Or do I also need to update to the inspire 1 firmware released to day?

My current status is:

App.  2.4.2
Aircraft.  1.2.1.06+
RC. 1.5.70
Camera.   1.1.0.40

If you have "only" the X5 gimbal/camera this fw update is "not" for you. Wait, there will be a further update for the pro.

If you have the X3 and X5, you can update if you install your X3. You can then fly both cameras without issue.

remltr Posted at 2015-12-7 20:37
If you have "only" the X5 gimbal/camera this fw update is "not" for you. Wait, there will be a furth ...

Ok.  Sounds good  to me.     Now ready for a flight when wind and rain disappears

DJI Tim does this release address the issue where android users are experiencing no camera view when DJI go app was updated to 2.4.2 with firmware 1.4.1 and RC 1.4.3.  Using the Lightbridge app verified the usb port is connected so that does not appear to be the issue. Fo App 2.4.0 worked perfectly.
I am still grounded with no camera view. When I called support they were having technical difficulties.
Also I have sent an email as requested week and a half ago ...still no reply.

I need help to get back to flying and so far nothing has worked so will this new firmware address this issue?

mani Posted at 2015-12-7 12:29
Before an official firmware release there is a pretty careful pre-beta and beta testing. When it g ...

That is not true...I am grounded because of an update so the beta is the general public seems like to me...I have now learned DO NOT UPGRADE UNLESS TOTALLY REQUIRED...If not you could be sorry.

Anyone having this problem?  I have tried upgrading the firmware in our I1 four times today.  Every time I get a "corrupted" error message.  I've tried two different micro SD cards, formatted in the I1, nothing else on them.  I've tried downloading the firmware fresh each time from the DJI website.  Nothing works.  I'm using an Apple Mac Pro Yosemite OS 10.10.3.  Thoughts?

This one is the biggie for me "Adjusted video storage rate to 60Mbps at 1080p60, and 40 Mbps at 1080p30."

That's a 20Mbps increase across the board in 1080 modes. This may well make the 1080 modes the go to modes for the X3 as this should bring about a significant boost in quality. I just wish the weather would get better around here so that I can test it!

Positveimage Posted at 2015-12-8 01:20
DJI Tim, DAVE, Tahoe-Ed anyone?

In the release notes, what does "Hibernation and gimbal protection  ...

I think this only relates to if you intend to use the Inspire X3 on the Osmo handheld.  ie If you buy the Osmo with its own X3 camera, it has has a feature where it goes into hibernation etc when not in use.
If you use the Inspire X3 on the Osmo then it will not go into hibernation etc.

hometurf2 Posted at 2015-12-7 16:31
That is not true...I am grounded because of an update so the beta is the general public seems like ...

Grrrr!!!!!

Please help, I did the v1.5.0.30 update tonight and for the first time I got a fail indication.  I restarted the aircraft and it started normally with no indication of trying to update again. I checked the firmware versions via the app and it showed v1.4.00.10+. I tried to put the 1.5.0.30 on a different SD card and the aircraft still says the it is the latest firmware with v1.4.00.10+. Any ideas?

cableguy1970 Posted at 2015-12-7 21:16
Please help, I did the v1.5.0.30 update tonight and for the first time I got a fail indication.  I r ...

Try reinstalling 1.3.0 then install 1.5.0 directly without 1.4.0 If that doesn't work, reinstall 1.4.0 and try again with 1.5.0

I have the same problem. After i turn off then turn on the bird, controller and calibrate the IMU it displayed the right version number

Positveimage Posted at 2015-12-7 20:36
Great news Tim, but what is "Hibernation and Gimbal protection?"

It's the function of the original OSMO gimbal.

dopeytree Posted at 2015-12-7 21:34
Is this for the inspire pro too?

Hi, this is for Inspire 1 only.

Starship Posted at 2015-12-7 22:04
Question on FOLLOW ME mode.    I have an iPad Air 2 NON cellular.  Does Follow Me rely on the locati ...

Hi, the FM function rely on the GPS module on the mobile device, which means ipad NON cellular version can't use this function.

Positveimage Posted at 2015-12-7 22:50
DJI Tim, DAVE, Tahoe-Ed anyone?

In the release notes, what does "Hibernation and gimbal protection  ...

It's the function of OSMO gimbal, since this update can make the X3 camera be compatible with Osmo.

hi all

looking for advice  

1.
i am still on 1.5.0.29 firmware  should i upgrade to 1.5.0.30

2.
i have just bought x5  and would like to know if it is ok to use x5 on standard inspire firmware or do i have to upgrade to the pro firmware

cheers
alan

mani Posted at 2015-12-8 01:29
Before an official firmware release there is a pretty careful pre-beta and beta testing. When it g ...

Yes, a million thanks for all of the beta testers!

ian@consultfirs Posted at 2015-12-8 03:54
That's the simple question I would like to know the answer to from dji
I have no problems with tru ...

This update is for X3 camera only, please upgrade the X3 camera only.