Please select Into the mobile phone version | Continue to access the computer ver.
P2 Vision flashing red lights and beeping
4160 10 2014-12-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
deanadamedge
lvl.1

Canada
Offline

Hello all!

Does anyone know how I can stop the red flashing lights and constant beeping coming from my P2 Vision when I start it up? There's no connection to the remote and all software is current...?
2014-12-28
Use props
DJI-Autumn
First Officer

China
Offline

Calibrate your RC then try again
2014-12-29
Use props
deanadamedge
lvl.1

Canada
Offline

My mac won't connect to the rc even after I installed the app?
2014-12-29
Use props
Eirlink
Second Officer

Ireland
Offline

Are you using the correct assistant ?
2014-12-29
Use props
deanadamedge.me
lvl.1

Canada
Offline

I fixed it now...many thanks...
2015-2-11
Use props
m.friedl
Second Officer
Flight distance : 3 ft
Austria
Offline

Would be great to write how you fixed it to share your Experience
2015-2-12
Use props
DRONEGALLERY
lvl.1
Iceland
Offline

deanadamedge.me how did you fix the problem of red flashing light and beep, couse I have same problem. hope your response...
2015-2-27
Use props
francall
New

Malta
Offline

I had the same problem which happened when I tried to use PT2 version 3.8 to upgrade the firmware and it failed mid-way.   I then used PT2 version 3.6, re-applied the firmware upgrades and the red flashing lights/bleeping sound went away.
2015-5-29
Use props
elbicho

United States
Offline

   Have done all the things listed above several times but they don't work.
Today I received a new central controller and installed but the same thing.
Beeping and it appears to be constant alternating left/right/left/right front lights.
Don't know what to try next.  Are you also talking about the FRONT lights?

Mine goes all the way through completion and get GPS green blinking on the rear
two lights but the front ones blink in sync and then later they go to alternating right/left
right/left.  A dealer told me that was because of no GPS data but I don't think so.
GPS status is indicated on the rear lights.
2015-6-19
Use props
pb05life
lvl.1

United States
Offline

elbicho@comcast Posted at 2015-6-20 11:18
Have done all the things listed above several times but they don't work.
Today I received a new  ...

what colors are they blinking, if it is yellow / red that is compass calibration
2015-6-21
Use props
roy
First Officer

United States
Offline

If your still getting beeps , it's normally due to incomplete upgrade or corrupted software. You may want to try another upgrade using a different USB cable. See if that corrects the problem. If you upgrade one the upgrade all so they are all up to date.
2015-6-24
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules