My osmo not start. to turn it he no light no light, the wifi works and works coller. but only that

Im sorry friend but i dont understand what your saying?

My osmo does not work when you call. only the WiFi and the cooler works

If I understand correctly, your wifi is ON and the fan (cooler) is ON, but nothing else.

Did you update the firmware on Dec 25? If YES, read this.

Gimbal limp, led on the handle won't light up after powering on, only the fan is working
Solution

Gimbal limp, led on the handle won't light up after powering on, only the fan is working

cebola47 Posted at 2015-12-30 10:30
Gimbal limp, led on the handle won't light up after powering on, only the fan is working

Don't worry, I can understand your problem. Did you buy the handle only or the Osmo? If you have the X3 camera of Inspire 1, you need to upgrade it on the inpire 1 with the latest firmware of inspire 1, then you can mount it to Osmo handle. If you're using the Osmo only, please try the following solution.

Solution:
1) Fully charge the battery until the led light on the charger turns from red to green.
2）Reboot and upgrade the OSMO: Copy the latest upgrade bin file into the SD card. Hold the trigger and record button, and pull down the power button at the same time. Hold it until the right led blinks red and green. Then try to upgrade the OSMO into v. 1.4.1.80. (The OSMO will update automatically with the bin file in the SD card, please wait about 20 minutes for the upgrade, the left led becomes solid green means the upgrade is successful)

OK. I did it. but for my mistake. I stopped the update before completion, now when I update again of failure. already tried several times. My dji osmo

my log

[00009161]========== remo-con disconnect. boot(15) ============
[00009277]Packet [C:\OSMO_FW_V01.00.01.18.bin] detected, card sn [0x9162153c].
[00009307]Packet upgrade start...

[00012365]Packet checking...
[00012399]Packet vlink 01.00.0118 <-> 01.00.0117.
[00012468]Done.

[00012500]Version checking[1]...
[00012585][07 00][00] v1.0.9.14 -> v1.0.9.22 need upgrade.
[00012635][08 00][00] v1.14.0.25 -> v2.14.9.26 need upgrade.
[00012669][01 00][00] v2.23.3994 -> v2.29.4149 need upgrade
[00012700][01 01][00] v2.17.3825 -> v2.29.4149 need upgrade
[00012755][04 00][00] v1.26.0.50 -> v1.29.0.0 need upgrade.
[00012806][09 00][00] v0.0.0.21 -> v0.0.0.61 need upgrade.
[00012838]Done.

[00014867]Waiting for user confirm...
[00024901]Timeout, start upgrade automatically.

[00024983]Firmware upgrading[1]...
[00039077][01 00] Firmware upgrade start...
[00025081][01 00] Firmware upgrade finished successfully.
[00025114]Done.

[00025147]Packet [C:\OSMO_FW_V01.00.01.18.bin] resumed, card sn [0x9162153c].
[00025182]Packet vlink 01.00.0118 <-> 01.00.0117.
[00025248]Version checking[2]...
[00025311][07 00][00] v1.0.9.14 -> v1.0.9.22 need upgrade.
[00025367][08 00][00] v1.14.0.25 -> v2.14.9.26 need upgrade.
[00025401][01 00][05] v2.29.4149 -> v2.29.4149
[00025439][01 01][00] v2.17.3825 -> v2.29.4149 need upgrade
[00025478][04 00][00] v1.26.0.50 -> v1.29.0.0 need upgrade.
[00025519][09 00][00] v0.0.0.21 -> v0.0.0.61 need upgrade.
[00025564]Done.

[00025603]Firmware upgrading[2]...
[00025688][01 01] Firmware upgrade start...
[00055967][01 01] Firmware upgrade finished successfully.
[00056619][08 00] Firmware upgrade start...
[00581658][08 00] Firmware upgrade finished successfully.
[00582148][07 00] Firmware upgrade start...
[00603376][07 00] Firmware upgrade finish failed (step = 2, err = 0x01).
[00633440][09 00] Firmware upgrade start...
[00698367][09 00] Firmware upgrade finished successfully.
[00698436][04 00] Firmware upgrade start...
[00780083][04 00] Firmware upgrade finished successfully.
[00780198]Done.

[00780231]Version checking[3]...
[00780299][07 00][00] v1.0.9.14 -> v1.0.9.22 need upgrade.
[00780345][08 00][05] v2.14.9.26 -> v2.14.9.26
[00780378][01 00][05] v2.29.4149 -> v2.29.4149
[00780410][01 01][05] v2.29.4149 -> v2.29.4149
[00780456][04 00][05] v1.29.0.0 -> v1.29.0.0
[00780503][09 00][05] v0.0.0.61 -> v0.0.0.61
[00780539]Done.

[00780574]Firmware upgrading[3]...
[00781059][07 00] Firmware upgrade start...
[00866681][07 00] Firmware upgrade finished successfully.
[00866717]Done.

[00866757]Version checking[4]...
[00866811][07 00][05] v1.0.9.22 -> v1.0.9.22
[00866851][08 00][05] v2.14.9.26 -> v2.14.9.26
[00866884][01 00][05] v2.29.4149 -> v2.29.4149
[00866922][01 01][05] v2.29.4149 -> v2.29.4149
[00866971][04 00][05] v1.29.0.0 -> v1.29.0.0
[00867021][09 00][05] v0.0.0.61 -> v0.0.0.61
[00867056]Packet upgrade finish successfully.



[00010749]========== remo-con disconnect. boot(15) ============
[00010782]Packet [C:\OSMO_FW_V01.00.01.19.bin] detected, card sn [0x50ce5702].
[00010820]Packet upgrade start...

[00010859]Packet checking...
[00010894]Packet vlink 01.00.0119 <-> 01.00.0118.
[00010929]Record vlink 01.00.0118 <-> 01.00.0117 (flow = 0).
[00010961]Done.

[00010995]Version checking[1]...
[00011054][07 00][00] v1.0.9.22 -> v1.0.9.22
[00023595][08 00][00] device not detected.
[00023628][01 00][00] v2.29.4149 -> v2.29.4149
[00023664][01 01][00] v2.29.4149 -> v2.29.4149
[00023704][04 00][00] v1.29.0.0 -> v1.29.0.0
[00023772][09 00][00] v0.0.0.61 -> v0.0.0.62 need upgrade.
[00023809]Done.

[00027929]Waiting for user confirm...
[00037971]Timeout, start upgrade automatically.

[00038037]Firmware upgrading[1]...
[00038099][09 00] Firmware upgrade start...
[00131790][09 00] Firmware upgrade finished successfully.
[00131827]Done.

[00131870]Version checking[2]...
[00131929][07 00][00] v1.0.9.22 -> v1.0.9.22
[00131984][08 00][00] v2.14.9.26 -> v2.14.9.26
[00132126][01 00][00] v2.29.4149 -> v2.29.4149
[00132171][01 01][00] v2.29.4149 -> v2.29.4149
[00132213][04 00][00] v1.29.0.0 -> v1.29.0.0
[00132259][09 00][05] v0.0.0.62 -> v0.0.0.62
[00132300]Packet upgrade finish successfully.



[00010719]========== remo-con disconnect. boot(15) ============
[00010757]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00010793]Packet upgrade start...

[00010841]Packet checking...
[00010878]Packet vlink 01.04.0180 <-> 01.02.0160.
[00010939]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00010975]Done.

[00011016]Version checking[1]...
[00011073][07 00][00] v1.0.9.22 -> v1.0.9.40 need upgrade.
[00011129][08 00][00] v2.14.9.26 -> v2.14.9.37 need upgrade.
[00011166][01 00][00] v2.29.4149 -> v2.47.4492 need upgrade
[00011209][01 01][00] v2.29.4149 -> v2.47.4492 need upgrade
[00011254][04 00][00] v1.29.0.0 -> v1.29.0.63 need upgrade.
[00011300][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00011337]Done.

[00013986]Waiting for user confirm...
[00024026]Timeout, start upgrade automatically.

[00024102]Firmware upgrading[1]...
[00029897][01 00] Firmware upgrade start...
[00020048][01 00] Firmware upgrade finished successfully.
[00020086]Done.

[00020129]Packet [C:\OSMO_FW_V01.04.01.80.bin] resumed, card sn [0xb1621faa].
[00020193]Packet vlink 01.04.0180 <-> 01.02.0160.
[00020236]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00020280]Version checking[2]...
[00020337][07 00][00] v1.0.9.22 -> v1.0.9.40 need upgrade.
[00020414][08 00][00] v2.14.9.26 -> v2.14.9.37 need upgrade.
[00020452][01 00][05] v2.47.4492 -> v2.47.4492
[00020491][01 01][00] v2.29.4149 -> v2.47.4492 need upgrade
[00020536][04 00][00] v1.29.0.0 -> v1.29.0.63 need upgrade.
[00020581][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00020623]Done.

[00020660]Firmware upgrading[2]...
[00020756][01 01] Firmware upgrade start...
[00031036][01 01] Firmware upgrade finished successfully.
[00031709][08 00] Firmware upgrade start...
[00559200][08 00] Firmware upgrade finished successfully.
[00559708][07 00] Firmware upgrade start...
[00612415][07 00] Firmware upgrade finish failed (step = 5, err = 0xaa, sum = 0x7b64).
[00622493][09 00] Firmware upgrade start...
[00715070][09 00] Firmware upgrade finished successfully.
[00715142][04 00] Firmware upgrade start...
[00774987][04 00] Firmware upgrade finished successfully.
[00775026]Done.

[00775594]Version checking[3]...
[00775696][07 00][00] v1.0.9.22 -> v1.0.9.40 need upgrade.
[00775806][08 00][05] v2.14.9.37 -> v2.14.9.37
[00775852][01 00][05] v2.47.4492 -> v2.47.4492
[00775892][01 01][05] v2.47.4492 -> v2.47.4492
[00775940][04 00][05] v1.29.0.63 -> v1.29.0.63
[00775996][09 00][05] v0.0.0.73 -> v0.0.0.73
[00776040]Done.

[00776081]Firmware upgrading[3]...
[00776651][07 00] Firmware upgrade start...
[00802400]Packet upgrade stopped, enter sleep mode.



[00008623]========== remo-con disconnect. boot(15) ============
[00008668]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008704]Packet upgrade start...

[00008754]Packet checking...
[00008792]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008832]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00008876]Done.

[00008916]Version checking[1]...
[00008991][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009042][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009080][01 00][00] v2.47.4492 -> v2.47.4492
[00009119][01 01][00] v2.47.4492 -> v2.47.4492
[00009175][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009231][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009272]Done.

[00015326]Waiting for user confirm...
[00025425]Timeout, start upgrade automatically.

[00025507]Firmware upgrading[1]...
[00025928][07 00] Firmware upgrade start...
[00112465][07 00] Firmware upgrade finished successfully.
[00112503]Done.

[00112550]Version checking[2]...
[00112623][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00112675][08 00][00] v2.14.9.37 -> v2.14.9.37
[00112806][01 00][00] v2.47.4492 -> v2.47.4492
[00112849][01 01][00] v2.47.4492 -> v2.47.4492
[00112896][04 00][00] v1.29.0.63 -> v1.29.0.63
[00112944][09 00][00] v0.0.0.73 -> v0.0.0.73
[00112984]Done.

[00113021]Firmware upgrading[2]...
[00113448][07 00] Firmware upgrade start...
[00179439][07 00] Firmware upgrade finish without reboot.
[00219479][07 00] Firmware upgrade finished successfully.
[00219518]Done.

[00219563]Version checking[3]...
[00232102][07 00][05] device not detected.
[00232155][08 00][00] v2.14.9.37 -> v2.14.9.37
[00232202][01 00][00] v2.47.4492 -> v2.47.4492
[00232242][01 01][00] v2.47.4492 -> v2.47.4492
[00232292][04 00][00] v1.29.0.63 -> v1.29.0.63
[00232347][09 00][00] v0.0.0.73 -> v0.0.0.73
[00232391]Packet upgrade failed at version checking.



[00008623]========== remo-con disconnect. boot(15) ============
[00008668]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008705]Packet upgrade start...

[00008755]Packet checking...
[00008795]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008840]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00008878]Done.

[00008918]Version checking[1]...
[00009009][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009223][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009269][01 00][00] v2.47.4492 -> v2.47.4492
[00009307][01 01][00] v2.47.4492 -> v2.47.4492
[00009369][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009419][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009461]Done.

[00015516]Waiting for user confirm...
[00025560]Timeout, start upgrade automatically.

[00025639]Firmware upgrading[1]...
[00026071][07 00] Firmware upgrade start...
[00112534][07 00] Firmware upgrade finished successfully.
[00112577]Done.

[00112616]Version checking[2]...
[00115195][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00115247][08 00][00] v2.14.9.37 -> v2.14.9.37
[00115287][01 00][00] v2.47.4492 -> v2.47.4492
[00115324][01 01][00] v2.47.4492 -> v2.47.4492
[00115475][04 00][00] v1.29.0.63 -> v1.29.0.63
[00115524][09 00][00] v0.0.0.73 -> v0.0.0.73
[00115570]Done.

[00115608]Firmware upgrading[2]...
[00116047][07 00] Firmware upgrade start...
[00178239][07 00] Firmware upgrade finish without reboot.
[00182646]Packet upgrade stopped, enter sleep mode.



[00008751]========== remo-con disconnect. boot(15) ============
[00008791]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008836]Packet upgrade start...

[00008881]Packet checking...
[00008945]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008987]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009030]Done.

[00009070]Version checking[1]...
[00009138][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009312][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009353][01 00][00] v2.47.4492 -> v2.47.4492
[00009395][01 01][00] v2.47.4492 -> v2.47.4492
[00009446][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009497][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009539]Done.

[00015634]Waiting for user confirm...
[00025675]Timeout, start upgrade automatically.

[00025764]Firmware upgrading[1]...
[00026193][07 00] Firmware upgrade start...
[00077953][07 00] Firmware upgrade finish without reboot.
[00093520]Packet upgrade stopped, enter sleep mode.



[00008751]========== remo-con disconnect. boot(15) ============
[00008790]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008835]Packet upgrade start...

[00008881]Packet checking...
[00008947]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008986]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009029]Done.

[00009069]Version checking[1]...
[00009136][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009236][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009276][01 00][00] v2.47.4492 -> v2.47.4492
[00009322][01 01][00] v2.47.4492 -> v2.47.4492
[00009381][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009443][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009483]Done.

[00015549]Waiting for user confirm...
[00025705]Timeout, start upgrade automatically.

[00025794]Firmware upgrading[1]...
[00026227][07 00] Firmware upgrade start...
[00048309]Packet upgrade stopped, enter sleep mode.



[00008692]========== remo-con disconnect. boot(15) ============
[00008741]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008782]Packet upgrade start...

[00008825]Packet checking...
[00008874]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008916]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00008957]Done.

[00008999]Version checking[1]...
[00009088][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009146][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009185][01 00][00] v2.47.4492 -> v2.47.4492
[00009227][01 01][00] v2.47.4492 -> v2.47.4492
[00009278][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009341][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009382]Done.

[00015446]Waiting for user confirm...
[00025486]Timeout, start upgrade automatically.

[00025574]Firmware upgrading[1]...
[00025995][07 00] Firmware upgrade start...
[00038614]Packet upgrade stopped, enter sleep mode.



[00008629]========== remo-con disconnect. boot(15) ============
[00008673]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008713]Packet upgrade start...

[00008763]Packet checking...
[00008805]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008852]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00008892]Done.

[00008940]Version checking[1]...
[00009019][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009225][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009272][01 00][00] v2.47.4492 -> v2.47.4492
[00009314][01 01][00] v2.47.4492 -> v2.47.4492
[00009376][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009429][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009472]Done.

[00015524]Waiting for user confirm...
[00025570]Timeout, start upgrade automatically.

[00025656]Firmware upgrading[1]...
[00026091][07 00] Firmware upgrade start...
[00091209]Packet upgrade stopped, enter sleep mode.



[00008745]========== remo-con disconnect. boot(15) ============
[00008786]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008829]Packet upgrade start...

[00008878]Packet checking...
[00008926]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008969]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009015]Done.

[00009058]Version checking[1]...
[00009138][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009215][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009259][01 00][00] v2.47.4492 -> v2.47.4492
[00009300][01 01][00] v2.47.4492 -> v2.47.4492
[00009356][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009412][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009457]Done.

[00015518]Waiting for user confirm...
[00025561]Timeout, start upgrade automatically.

[00025649]Firmware upgrading[1]...
[00026069][07 00] Firmware upgrade start...
[00077409][07 00] Firmware upgrade finish without reboot.
[00117451][07 00] Firmware upgrade finished successfully.
[00117495]Done.

[00117537]Version checking[2]...
[00130082][07 00][05] device not detected.
[00130133][08 00][00] v2.14.9.37 -> v2.14.9.37
[00130177][01 00][00] v2.47.4492 -> v2.47.4492
[00130218][01 01][00] v2.47.4492 -> v2.47.4492
[00130278][04 00][00] v1.29.0.63 -> v1.29.0.63
[00130333][09 00][00] v0.0.0.73 -> v0.0.0.73
[00130376]Packet upgrade failed at version checking.



[00008766]========== remo-con disconnect. boot(15) ============
[00008836]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008877]Packet upgrade start...

[00008922]Packet checking...
[00008973]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009016]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009061]Done.

[00009103]Version checking[1]...
[00009194][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009257][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009299][01 00][00] v2.47.4492 -> v2.47.4492
[00009348][01 01][00] v2.47.4492 -> v2.47.4492
[00009512][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009576][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009617]Done.

[00015680]Waiting for user confirm...
[00025721]Timeout, start upgrade automatically.

[00025816]Firmware upgrading[1]...
[00026234][07 00] Firmware upgrade start...
[00077969][07 00] Firmware upgrade finish without reboot.
[00118016][07 00] Firmware upgrade finished successfully.
[00118064]Done.

[00118108]Version checking[2]...
[00130658][07 00][05] device not detected.
[00130739][08 00][00] v2.14.9.37 -> v2.14.9.37
[00130812][01 00][00] v2.47.4492 -> v2.47.4492
[00130863][01 01][00] v2.47.4492 -> v2.47.4492
[00130912][04 00][00] v1.29.0.63 -> v1.29.0.63
[00130988][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131031]Packet upgrade failed at version checking.



[00010763]========== remo-con disconnect. boot(15) ============
[00010811]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00010853]Packet upgrade start...

[00010898]Packet checking...
[00010975]Packet vlink 01.04.0180 <-> 01.02.0160.
[00011022]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00011065]Done.

[00011112]Version checking[1]...
[00011168][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00011291][08 00][00] v2.14.9.37 -> v2.14.9.37
[00011338][01 00][00] v2.47.4492 -> v2.47.4492
[00011385][01 01][00] v2.47.4492 -> v2.47.4492
[00011436][04 00][00] v1.29.0.63 -> v1.29.0.63
[00011493][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00011564]Done.

[00017129]Waiting for user confirm...
[00027173]Timeout, start upgrade automatically.

[00027266]Firmware upgrading[1]...
[00027681][07 00] Firmware upgrade start...
[00079380][07 00] Firmware upgrade finish without reboot.
[00119423][07 00] Firmware upgrade finished successfully.
[00119496][09 00] Firmware upgrade start...
[00217409][09 00] Firmware upgrade finished successfully.
[00217454]Done.

[00217497]Version checking[2]...
[00230045][07 00][05] device not detected.
[00230234][08 00][00] v2.14.9.37 -> v2.14.9.37
[00230277][01 00][00] v2.47.4492 -> v2.47.4492
[00230321][01 01][00] v2.47.4492 -> v2.47.4492
[00230405][04 00][00] v1.29.0.63 -> v1.29.0.63
[00230463][09 00][05] v0.0.0.73 -> v0.0.0.73
[00230506]Packet upgrade failed at version checking.



[00008849]========== remo-con disconnect. boot(15) ============
[00008890]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00008941]Packet upgrade start...

[00008989]Packet checking...
[00009062]Packet vlink 01.02.0160 <-> 01.00.0120.
[00009111]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009157]Done.

[00009199]Version checking[1]...
[00011769][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00011832][08 00][00] v2.14.9.37 -> v2.14.9.26
[00011878][01 00][00] v2.47.4492 -> v2.39.4359
[00011925][01 01][00] v2.47.4492 -> v2.39.4359
[00011977][04 00][00] v1.29.0.63 -> v1.29.0.13
[00012039][09 00][00] v0.0.0.73 -> v0.0.0.65
[00012085]Done.

[00018166]Waiting for user confirm...
[00028208]Timeout, start upgrade automatically.

[00028304]Firmware upgrading[1]...
[00028722][07 00] Firmware upgrade start...
[00080445][07 00] Firmware upgrade finish without reboot.
[00120494][07 00] Firmware upgrade finished successfully.
[00120543]Done.

[00120587]Version checking[2]...
[00133136][07 00][05] device not detected.
[00133189][08 00][00] v2.14.9.37 -> v2.14.9.26
[00133241][01 00][00] v2.47.4492 -> v2.39.4359
[00133283][01 01][00] v2.47.4492 -> v2.39.4359
[00133362][04 00][00] v1.29.0.63 -> v1.29.0.13
[00133420][09 00][00] v0.0.0.73 -> v0.0.0.65
[00133473]Packet upgrade failed at version checking.



[00012753]========== remo-con disconnect. boot(15) ============
[00012795]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00012844]Packet upgrade start...

[00012892]Packet checking...
[00012944]Packet vlink 01.02.0160 <-> 01.00.0120.
[00012990]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00013132]Done.

[00013182]Version checking[1]...
[00013244][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00013315][08 00][00] v2.14.9.37 -> v2.14.9.26
[00013362][01 00][00] v2.47.4492 -> v2.39.4359
[00013429][01 01][00] v2.47.4492 -> v2.39.4359
[00013481][04 00][00] v1.29.0.63 -> v1.29.0.13
[00013538][09 00][00] v0.0.0.0 -> v0.0.0.65 need upgrade.
[00013585]Done.

[00019153]Waiting for user confirm...
[00029199]Timeout, start upgrade automatically.

[00029294]Firmware upgrading[1]...
[00029757][07 00] Firmware upgrade start...
[00115488][07 00] Firmware upgrade finished successfully.
[00115562][09 00] Firmware upgrade start...
[00181208][09 00] Firmware upgrade finished successfully.
[00181252]Done.

[00181300]Version checking[2]...
[00181365][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00181431][08 00][00] v2.14.9.37 -> v2.14.9.26
[00181476][01 00][00] v2.47.4492 -> v2.39.4359
[00181548][01 01][00] v2.47.4492 -> v2.39.4359
[00181609][04 00][00] v1.29.0.63 -> v1.29.0.13
[00181696][09 00][05] v0.0.0.65 -> v0.0.0.65
[00181739]Done.

[00181790]Firmware upgrading[2]...
[00182213][07 00] Firmware upgrade start...
[00279118][07 00] Firmware upgrade finished successfully.
[00279163]Done.

[00279213]Version checking[3]...
[00279281][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00279333][08 00][00] v2.14.9.37 -> v2.14.9.26
[00279401][01 00][00] v2.47.4492 -> v2.39.4359
[00279467][01 01][00] v2.47.4492 -> v2.39.4359
[00279525][04 00][00] v1.29.0.63 -> v1.29.0.13
[00279610][09 00][05] v0.0.0.65 -> v0.0.0.65
[00279654]Done.

[00279699]Firmware upgrading[3]...
[00280111][07 00] Firmware upgrade start...
[00380690][07 00] Firmware upgrade finished successfully.
[00380733]Done.

[00380785]Version checking[4]...
[00380850][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00380907][08 00][00] v2.14.9.37 -> v2.14.9.26
[00380949][01 00][00] v2.47.4492 -> v2.39.4359
[00381021][01 01][00] v2.47.4492 -> v2.39.4359
[00381192][04 00][00] v1.29.0.63 -> v1.29.0.13
[00381251][09 00][05] v0.0.0.65 -> v0.0.0.65
[00381300]Done.

[00381348]Firmware upgrading[4]...
[00381771][07 00] Firmware upgrade start...
[00482222][07 00] Firmware upgrade finished successfully.
[00482267]Done.

[00482316]Version checking[5]...
[00484902][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00484960][08 00][00] v2.14.9.37 -> v2.14.9.26
[00485006][01 00][00] v2.47.4492 -> v2.39.4359
[00485052][01 01][00] v2.47.4492 -> v2.39.4359
[00485141][04 00][00] v1.29.0.63 -> v1.29.0.13
[00485213][09 00][05] v0.0.0.65 -> v0.0.0.65
[00485261]Done.

[00485305]Firmware upgrading[5]...
[00485724][07 00] Firmware upgrade start...
[00582524][07 00] Firmware upgrade finished successfully.
[00582567]Done.

[00582616]Version checking[6]...
[00582694][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00582754][08 00][00] v2.14.9.37 -> v2.14.9.26
[00582805][01 00][00] v2.47.4492 -> v2.39.4359
[00582851][01 01][00] v2.47.4492 -> v2.39.4359
[00582910][04 00][00] v1.29.0.63 -> v1.29.0.13
[00582985][09 00][05] v0.0.0.65 -> v0.0.0.65
[00583030]Packet upgrade failed at firmware upgrade.



[00008921]========== remo-con disconnect. boot(15) ============
[00008968]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00009019]Packet upgrade start...

[00009073]Packet checking...
[00009126]Packet vlink 01.02.0160 <-> 01.00.0120.
[00009173]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009223]Done.

[00009296]Version checking[1]...
[00009383][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00009446][08 00][00] v2.14.9.37 -> v2.14.9.26
[00009489][01 00][00] v2.47.4492 -> v2.39.4359
[00009541][01 01][00] v2.47.4492 -> v2.39.4359
[00009595][04 00][00] v1.29.0.63 -> v1.29.0.13
[00009673][09 00][00] v0.0.0.65 -> v0.0.0.65
[00009722]Done.

[00015289]Waiting for user confirm...
[00025342]Timeout, start upgrade automatically.

[00025485]Firmware upgrading[1]...
[00025912][07 00] Firmware upgrade start...
[00077737][07 00] Firmware upgrade finish without reboot.
[00117788][07 00] Firmware upgrade finished successfully.
[00117835]Done.

[00117888]Version checking[2]...
[00130436][07 00][05] device not detected.
[00130517][08 00][00] v2.14.9.37 -> v2.14.9.26
[00130568][01 00][00] v2.47.4492 -> v2.39.4359
[00130618][01 01][00] v2.47.4492 -> v2.39.4359
[00130682][04 00][00] v1.29.0.63 -> v1.29.0.13
[00130743][09 00][00] v0.0.0.65 -> v0.0.0.65
[00130791]Packet upgrade failed at version checking.



[00008771]========== remo-con disconnect. boot(15) ============
[00008821]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008870]Packet upgrade start...

[00008928]Packet checking...
[00008981]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009030]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009085]Done.

[00009130]Version checking[1]...
[00009214][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009283][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009356][01 00][00] v2.47.4492 -> v2.47.4492
[00009410][01 01][00] v2.47.4492 -> v2.47.4492
[00009482][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009544][09 00][00] v0.0.0.65 -> v0.0.0.73 need upgrade.
[00009597]Done.

[00015160]Waiting for user confirm...
[00025209]Timeout, start upgrade automatically.

[00025334]Firmware upgrading[1]...
[00025774][07 00] Firmware upgrade start...
[00112225][07 00] Firmware upgrade finished successfully.
[00112301][09 00] Firmware upgrade start...
[00183956][09 00] Firmware upgrade finished successfully.
[00184005]Done.

[00184059]Version checking[2]...
[00191651][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00191831][08 00][00] v2.14.9.37 -> v2.14.9.37
[00191884][01 00][00] v2.47.4492 -> v2.47.4492
[00191936][01 01][00] v2.47.4492 -> v2.47.4492
[00191993][04 00][00] v1.29.0.63 -> v1.29.0.63
[00192065][09 00][05] v0.0.0.73 -> v0.0.0.73
[00192112]Done.

[00192168]Firmware upgrading[2]...
[00192632][07 00] Firmware upgrade start...
[00244979][07 00] Firmware upgrade finish without reboot.
[00285033][07 00] Firmware upgrade finished successfully.
[00285090]Done.

[00285139]Version checking[3]...
[00297698][07 00][05] device not detected.
[00297755][08 00][00] v2.14.9.37 -> v2.14.9.37
[00297810][01 00][00] v2.47.4492 -> v2.47.4492
[00297861][01 01][00] v2.47.4492 -> v2.47.4492
[00297920][04 00][00] v1.29.0.63 -> v1.29.0.63
[00297991][09 00][05] v0.0.0.73 -> v0.0.0.73
[00298042]Packet upgrade failed at version checking.



[00008771]========== remo-con disconnect. boot(15) ============
[00008825]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008875]Packet upgrade start...

[00008935]Packet checking...
[00008985]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009035]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009085]Done.

[00009136]Version checking[1]...
[00009205][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009304][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009381][01 00][00] v2.47.4492 -> v2.47.4492
[00009437][01 01][00] v2.47.4492 -> v2.47.4492
[00009491][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009554][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009603]Done.

[00015671]Waiting for user confirm...
[00025731]Timeout, start upgrade automatically.

[00025836]Firmware upgrading[1]...
[00026298][07 00] Firmware upgrade start...
[00112756][07 00] Firmware upgrade finished successfully.
[00112804]Done.

[00112861]Version checking[2]...
[00112976][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00113050][08 00][00] v2.14.9.37 -> v2.14.9.37
[00113100][01 00][00] v2.47.4492 -> v2.47.4492
[00113157][01 01][00] v2.47.4492 -> v2.47.4492
[00113218][04 00][00] v1.29.0.63 -> v1.29.0.63
[00113286][09 00][00] v0.0.0.73 -> v0.0.0.73
[00113340]Done.

[00113389]Firmware upgrading[2]...
[00113857][07 00] Firmware upgrade start...
[00180101][07 00] Firmware upgrade finish without reboot.
[00220153][07 00] Firmware upgrade finished successfully.
[00220287]Done.

[00220341]Version checking[3]...
[00232891][07 00][05] device not detected.
[00233117][08 00][00] v2.14.9.37 -> v2.14.9.37
[00233174][01 00][00] v2.47.4492 -> v2.47.4492
[00233221][01 01][00] v2.47.4492 -> v2.47.4492
[00233307][04 00][00] v1.29.0.63 -> v1.29.0.63
[00233379][09 00][00] v0.0.0.73 -> v0.0.0.73
[00233429]Packet upgrade failed at version checking.



[00009294]========== remo-con disconnect. boot(15) ============
[00009343]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00009396]Packet upgrade start...

[00009450]Packet checking...
[00009501]Packet vlink 01.02.0160 <-> 01.00.0120.
[00009550]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009599]Done.

[00009650]Version checking[1]...
[00009733][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00009800][08 00][00] v2.14.9.37 -> v2.14.9.26
[00009851][01 00][00] v2.47.4492 -> v2.39.4359
[00009899][01 01][00] v2.47.4492 -> v2.39.4359
[00009956][04 00][00] v1.29.0.63 -> v1.29.0.13
[00010023][09 00][00] v0.0.0.73 -> v0.0.0.65
[00010081]Done.

[00016159]Waiting for user confirm...
[00026211]Timeout, start upgrade automatically.

[00026318]Firmware upgrading[1]...
[00026766][07 00] Firmware upgrade start...
[00077927][07 00] Firmware upgrade finish without reboot.
[00117988][07 00] Firmware upgrade finished successfully.
[00118038]Done.

[00118091]Version checking[2]...
[00130636][07 00][05] device not detected.
[00130690][08 00][00] v2.14.9.37 -> v2.14.9.26
[00130743][01 00][00] v2.47.4492 -> v2.39.4359
[00130789][01 01][00] v2.47.4492 -> v2.39.4359
[00130857][04 00][00] v1.29.0.63 -> v1.29.0.13
[00130923][09 00][00] v0.0.0.73 -> v0.0.0.65
[00130972]Packet upgrade failed at version checking.



[00008657]========== remo-con disconnect. boot(15) ============
[00008703]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00008756]Packet upgrade start...

[00008815]Packet checking...
[00008983]Packet vlink 01.02.0160 <-> 01.00.0120.
[00009033]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009084]Done.

[00009135]Version checking[1]...
[00009205][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00009264][08 00][00] v2.14.9.37 -> v2.14.9.26
[00009319][01 00][00] v2.47.4492 -> v2.39.4359
[00009369][01 01][00] v2.47.4492 -> v2.39.4359
[00009428][04 00][00] v1.29.0.63 -> v1.29.0.13
[00009494][09 00][00] v0.0.0.73 -> v0.0.0.65
[00009551]Done.

[00015651]Waiting for user confirm...
[00022527]Packet upgrade stopped, enter sleep mode.



[00012878]========== remo-con disconnect. boot(15) ============
[00012932]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00012990]Packet upgrade start...

[00013042]Packet checking...
[00013097]Packet vlink 01.04.0180 <-> 01.02.0160.
[00013149]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00013204]Done.

[00013256]Version checking[1]...
[00013321][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00013401][08 00][00] v2.14.9.37 -> v2.14.9.37
[00013453][01 00][00] v2.47.4492 -> v2.47.4492
[00013507][01 01][00] v2.47.4492 -> v2.47.4492
[00013577][04 00][00] v1.29.0.63 -> v1.29.0.63
[00013638][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00013696]Done.

[00019510]Waiting for user confirm...
[00029579]Timeout, start upgrade automatically.

[00029708]Firmware upgrading[1]...
[00030122][07 00] Firmware upgrade start...
[00115849][07 00] Firmware upgrade finished successfully.
[00115953][09 00] Firmware upgrade start...
[00176152][09 00] Firmware upgrade finished successfully.
[00176199]Done.

[00176255]Version checking[2]...
[00176323][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00176412][08 00][00] v2.14.9.37 -> v2.14.9.37
[00176465][01 00][00] v2.47.4492 -> v2.47.4492
[00176516][01 01][00] v2.47.4492 -> v2.47.4492
[00176608][04 00][00] v1.29.0.63 -> v1.29.0.63
[00176672][09 00][05] v0.0.0.73 -> v0.0.0.73
[00176721]Done.

[00176914]Firmware upgrading[2]...
[00177334][07 00] Firmware upgrade start...
[00263545][07 00] Firmware upgrade finished successfully.
[00263599]Done.

[00263654]Version checking[3]...
[00263725][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00263806][08 00][00] v2.14.9.37 -> v2.14.9.37
[00263859][01 00][00] v2.47.4492 -> v2.47.4492
[00263910][01 01][00] v2.47.4492 -> v2.47.4492
[00263978][04 00][00] v1.29.0.63 -> v1.29.0.63
[00264045][09 00][05] v0.0.0.73 -> v0.0.0.73
[00264096]Done.

[00264154]Firmware upgrading[3]...
[00264583][07 00] Firmware upgrade start...
[00363427][07 00] Firmware upgrade finished successfully.
[00363481]Done.

[00363536]Version checking[4]...
[00363648][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00363736][08 00][00] v2.14.9.37 -> v2.14.9.37
[00363787][01 00][00] v2.47.4492 -> v2.47.4492
[00363846][01 01][00] v2.47.4492 -> v2.47.4492
[00363902][04 00][00] v1.29.0.63 -> v1.29.0.63
[00363978][09 00][05] v0.0.0.73 -> v0.0.0.73
[00364051]Done.

[00364103]Firmware upgrading[4]...
[00364520][07 00] Firmware upgrade start...
[00430882][07 00] Firmware upgrade finish without reboot.
[00470937][07 00] Firmware upgrade finished successfully.
[00470996]Done.

[00471052]Version checking[5]...
[00483608][07 00][05] device not detected.
[00483674][08 00][00] v2.14.9.37 -> v2.14.9.37
[00483728][01 00][00] v2.47.4492 -> v2.47.4492
[00483780][01 01][00] v2.47.4492 -> v2.47.4492
[00483837][04 00][00] v1.29.0.63 -> v1.29.0.63
[00483931][09 00][05] v0.0.0.73 -> v0.0.0.73
[00483990]Packet upgrade failed at version checking.



[00008729]========== remo-con disconnect. boot(15) ============
[00008785]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008839]Packet upgrade start...

[00008895]Packet checking...
[00008953]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009005]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009060]Done.

[00009113]Version checking[1]...
[00009321][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009407][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009462][01 00][00] v2.47.4492 -> v2.47.4492
[00009515][01 01][00] v2.47.4492 -> v2.47.4492
[00009585][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009661][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009714]Done.

[00016009]Waiting for user confirm...
[00026065]Timeout, start upgrade automatically.

[00026195]Firmware upgrading[1]...
[00026637][07 00] Firmware upgrade start...
[00078308][07 00] Firmware upgrade finish without reboot.
[00118383][07 00] Firmware upgrade finished successfully.
[00118433]Done.

[00118493]Version checking[2]...
[00131061][07 00][05] device not detected.
[00131124][08 00][00] v2.14.9.37 -> v2.14.9.37
[00131182][01 00][00] v2.47.4492 -> v2.47.4492
[00131236][01 01][00] v2.47.4492 -> v2.47.4492
[00131299][04 00][00] v1.29.0.63 -> v1.29.0.63
[00131391][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131442]Packet upgrade failed at version checking.



[00010691]========== remo-con disconnect. boot(15) ============
[00010749]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00010800]Packet upgrade start...

[00010863]Packet checking...
[00010916]Packet vlink 01.04.0180 <-> 01.02.0160.
[00010976]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00011025]Done.

[00011085]Version checking[1]...
[00011185][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00011260][08 00][00] v2.14.9.37 -> v2.14.9.37
[00011313][01 00][00] v2.47.4492 -> v2.47.4492
[00011415][01 01][00] v2.47.4492 -> v2.47.4492
[00011477][04 00][00] v1.29.0.63 -> v1.29.0.63
[00011543][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00011592]Done.

[00017161]Waiting for user confirm...
[00027213]Timeout, start upgrade automatically.

[00027322]Firmware upgrading[1]...
[00027780][07 00] Firmware upgrade start...
[00079423][07 00] Firmware upgrade finish without reboot.
[00119476][07 00] Firmware upgrade finished successfully.
[00119562][09 00] Firmware upgrade start...
[00205438][09 00] Firmware upgrade finished successfully.
[00205495]Done.

[00205556]Version checking[2]...
[00218110][07 00][05] device not detected.
[00218182][08 00][00] v2.14.9.37 -> v2.14.9.37
[00218235][01 00][00] v2.47.4492 -> v2.47.4492
[00218293][01 01][00] v2.47.4492 -> v2.47.4492
[00218388][04 00][00] v1.29.0.63 -> v1.29.0.63
[00218458][09 00][05] v0.0.0.73 -> v0.0.0.73
[00218511]Packet upgrade failed at version checking.



[00008668]========== remo-con disconnect. boot(15) ============
[00008744]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008794]Packet upgrade start...

[00008857]Packet checking...
[00008913]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008973]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009025]Done.

[00009084]Version checking[1]...
[00009209][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009277][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009328][01 00][00] v2.47.4492 -> v2.47.4492
[00009409][01 01][00] v2.47.4492 -> v2.47.4492
[00009469][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009542][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009592]Done.

[00015675]Waiting for user confirm...
[00025728]Timeout, start upgrade automatically.

[00025838]Firmware upgrading[1]...
[00026274][07 00] Firmware upgrade start...
[00077983][07 00] Firmware upgrade finish without reboot.
[00118042][07 00] Firmware upgrade finished successfully.
[00118100]Done.

[00118161]Version checking[2]...
[00130738][07 00][05] device not detected.
[00130809][08 00][00] v2.14.9.37 -> v2.14.9.37
[00130869][01 00][00] v2.47.4492 -> v2.47.4492
[00130924][01 01][00] v2.47.4492 -> v2.47.4492
[00130992][04 00][00] v1.29.0.63 -> v1.29.0.63
[00131062][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131113]Packet upgrade failed at version checking.



[00008709]========== remo-con disconnect. boot(15) ============
[00008768]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00008912]Packet upgrade start...

[00008977]Packet checking...
[00009036]Packet vlink 01.02.0160 <-> 01.00.0120.
[00009088]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009150]Done.

[00009202]Version checking[1]...
[00009293][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00009376][08 00][00] v2.14.9.37 -> v2.14.9.26
[00009437][01 00][00] v2.47.4492 -> v2.39.4359
[00009489][01 01][00] v2.47.4492 -> v2.39.4359
[00009561][04 00][00] v1.29.0.63 -> v1.29.0.13
[00009623][09 00][00] v0.0.0.73 -> v0.0.0.65
[00009684]Done.

[00015759]Waiting for user confirm...
[00025816]Timeout, start upgrade automatically.

[00025937]Firmware upgrading[1]...
[00026385][07 00] Firmware upgrade start...
[00077834][07 00] Firmware upgrade finish without reboot.
[00117888][07 00] Firmware upgrade finished successfully.
[00117945]Done.

[00117997]Version checking[2]...
[00130558][07 00][05] device not detected.
[00130730][08 00][00] v2.14.9.37 -> v2.14.9.26
[00130790][01 00][00] v2.47.4492 -> v2.39.4359
[00130845][01 01][00] v2.47.4492 -> v2.39.4359
[00130910][04 00][00] v1.29.0.63 -> v1.29.0.13
[00130995][09 00][00] v0.0.0.73 -> v0.0.0.65
[00131045]Packet upgrade failed at version checking.



[00012683]========== remo-con disconnect. boot(15) ============
[00012735]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00012794]Packet upgrade start...

[00012853]Packet checking...
[00012914]Packet vlink 01.02.0160 <-> 01.00.0120.
[00012990]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00013044]Done.

[00013099]Version checking[1]...
[00013186][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00013332][08 00][00] v2.14.9.37 -> v2.14.9.26
[00013394][01 00][00] v2.47.4492 -> v2.39.4359
[00013449][01 01][00] v2.47.4492 -> v2.39.4359
[00013514][04 00][00] v1.29.0.63 -> v1.29.0.13
[00013581][09 00][00] v0.0.0.0 -> v0.0.0.65 need upgrade.
[00013633]Done.

[00019206]Waiting for user confirm...
[00029261]Timeout, start upgrade automatically.

[00029469]Firmware upgrading[1]...
[00029915][07 00] Firmware upgrade start...
[00115618][07 00] Firmware upgrade finished successfully.
[00115702][09 00] Firmware upgrade start...
[00176677][09 00] Firmware upgrade finished successfully.
[00176729]Done.

[00176790]Version checking[2]...
[00176896][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00176972][08 00][00] v2.14.9.37 -> v2.14.9.26
[00177026][01 00][00] v2.47.4492 -> v2.39.4359
[00177088][01 01][00] v2.47.4492 -> v2.39.4359
[00177189][04 00][00] v1.29.0.63 -> v1.29.0.13
[00177266][09 00][05] v0.0.0.65 -> v0.0.0.65
[00177320]Done.

[00177382]Firmware upgrading[2]...
[00177807][07 00] Firmware upgrade start...
[00264288][07 00] Firmware upgrade finished successfully.
[00264350]Done.

[00264405]Version checking[3]...
[00264498][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00264562][08 00][00] v2.14.9.37 -> v2.14.9.26
[00264615][01 00][00] v2.47.4492 -> v2.39.4359
[00264697][01 01][00] v2.47.4492 -> v2.39.4359
[00264767][04 00][00] v1.29.0.63 -> v1.29.0.13
[00264839][09 00][05] v0.0.0.65 -> v0.0.0.65
[00264896]Done.

[00264954]Firmware upgrading[3]...
[00265387][07 00] Firmware upgrade start...
[00331495][07 00] Firmware upgrade finish without reboot.
[00371555][07 00] Firmware upgrade finished successfully.
[00371613]Done.

[00371673]Version checking[4]...
[00384229][07 00][05] device not detected.
[00384304][08 00][00] v2.14.9.37 -> v2.14.9.26
[00384411][01 00][00] v2.47.4492 -> v2.39.4359
[00384469][01 01][00] v2.47.4492 -> v2.39.4359
[00384531][04 00][00] v1.29.0.63 -> v1.29.0.13
[00384611][09 00][05] v0.0.0.65 -> v0.0.0.65
[00384670]Packet upgrade failed at version checking.



[00008703]========== remo-con disconnect. boot(15) ============
[00008762]Packet [C:\OSMO_FW_V01.02.01.60.bin] detected, card sn [0xb1621faa].
[00008815]Packet upgrade start...

[00008881]Packet checking...
[00008941]Packet vlink 01.02.0160 <-> 01.00.0120.
[00009111]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009173]Done.

[00009226]Version checking[1]...
[00009318][07 00][00] v1.0.9.14 -> v1.0.9.28 need upgrade.
[00009403][08 00][00] v2.14.9.37 -> v2.14.9.26
[00009462][01 00][00] v2.47.4492 -> v2.39.4359
[00009518][01 01][00] v2.47.4492 -> v2.39.4359
[00009591][04 00][00] v1.29.0.63 -> v1.29.0.13
[00009669][09 00][00] v0.0.0.65 -> v0.0.0.65
[00009724]Done.

[00015937]Waiting for user confirm...
[00025996]Timeout, start upgrade automatically.

[00026129]Firmware upgrading[1]...
[00026582][07 00] Firmware upgrade start...
[00078271][07 00] Firmware upgrade finish without reboot.
[00118332][07 00] Firmware upgrade finished successfully.
[00118394]Done.

[00118453]Version checking[2]...
[00131007][07 00][05] device not detected.
[00131079][08 00][00] v2.14.9.37 -> v2.14.9.26
[00131138][01 00][00] v2.47.4492 -> v2.39.4359
[00131199][01 01][00] v2.47.4492 -> v2.39.4359
[00131262][04 00][00] v1.29.0.63 -> v1.29.0.13
[00131391][09 00][00] v0.0.0.65 -> v0.0.0.65
[00131445]Packet upgrade failed at version checking.



[00008656]========== remo-con disconnect. boot(15) ============
[00008716]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008774]Packet upgrade start...

[00008841]Packet checking...
[00008897]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008962]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009024]Done.

[00009083]Version checking[1]...
[00009182][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009256][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009315][01 00][00] v2.47.4492 -> v2.47.4492
[00009375][01 01][00] v2.47.4492 -> v2.47.4492
[00009442][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009513][09 00][00] v0.0.0.65 -> v0.0.0.73 need upgrade.
[00009567]Done.

[00015658]Waiting for user confirm...
[00025719]Timeout, start upgrade automatically.

[00025845]Firmware upgrading[1]...
[00026280][07 00] Firmware upgrade start...
[00077866][07 00] Firmware upgrade finish without reboot.
[00117930][07 00] Firmware upgrade finished successfully.
[00118009][09 00] Firmware upgrade start...
[00189698][09 00] Firmware upgrade finished successfully.
[00189755]Done.

[00189816]Version checking[2]...
[00202373][07 00][05] device not detected.
[00202439][08 00][00] v2.14.9.37 -> v2.14.9.37
[00202493][01 00][00] v2.47.4492 -> v2.47.4492
[00202558][01 01][00] v2.47.4492 -> v2.47.4492
[00202627][04 00][00] v1.29.0.63 -> v1.29.0.63
[00202699][09 00][05] v0.0.0.73 -> v0.0.0.73
[00202761]Packet upgrade failed at version checking.



[00008854]========== remo-con disconnect. boot(0) ============
[00008911]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008976]Packet upgrade start...

[00009043]Packet checking...
[00009105]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009162]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009220]Done.

[00009285]Version checking[1]...
[00009394][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009484][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009547][01 00][00] v2.47.4492 -> v2.47.4492
[00009607][01 01][00] v2.47.4492 -> v2.47.4492
[00009682][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009766][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009822]Done.

[00015900]Waiting for user confirm...
[00025961]Timeout, start upgrade automatically.

[00026102]Firmware upgrading[1]...
[00026583][07 00] Firmware upgrade start...
[00112179][07 00] Firmware upgrade finished successfully.
[00112260]Done.

[00112318]Version checking[2]...
[00112411][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00112511][08 00][00] v2.14.9.37 -> v2.14.9.37
[00112574][01 00][00] v2.47.4492 -> v2.47.4492
[00112628][01 01][00] v2.47.4492 -> v2.47.4492
[00112703][04 00][00] v1.29.0.63 -> v1.29.0.63
[00112780][09 00][00] v0.0.0.73 -> v0.0.0.73
[00112840]Done.

[00112895]Firmware upgrading[2]...
[00113323][07 00] Firmware upgrade start...
[00213451][07 00] Firmware upgrade finished successfully.
[00213510]Done.

[00213574]Version checking[3]...
[00213653][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00213717][08 00][00] v2.14.9.37 -> v2.14.9.37
[00213781][01 00][00] v2.47.4492 -> v2.47.4492
[00213847][01 01][00] v2.47.4492 -> v2.47.4492
[00213909][04 00][00] v1.29.0.63 -> v1.29.0.63
[00213982][09 00][00] v0.0.0.73 -> v0.0.0.73
[00214068]Done.

[00214128]Firmware upgrading[3]...
[00214563][07 00] Firmware upgrade start...
[00280827][07 00] Firmware upgrade finish without reboot.
[00320889][07 00] Firmware upgrade finished successfully.
[00320953]Done.

[00321011]Version checking[4]...
[00333574][07 00][05] device not detected.
[00333647][08 00][00] v2.14.9.37 -> v2.14.9.37
[00333711][01 00][00] v2.47.4492 -> v2.47.4492
[00333776][01 01][00] v2.47.4492 -> v2.47.4492
[00333843][04 00][00] v1.29.0.63 -> v1.29.0.63
[00333923][09 00][00] v0.0.0.73 -> v0.0.0.73
[00333993]Packet upgrade failed at version checking.



[00008891]========== remo-con disconnect. boot(15) ============
[00008953]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00009013]Packet upgrade start...

[00009083]Packet checking...
[00009150]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009208]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009274]Done.

[00009328]Version checking[1]...
[00009420][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009508][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009597][01 00][00] v2.47.4492 -> v2.47.4492
[00009659][01 01][00] v2.47.4492 -> v2.47.4492
[00009726][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009802][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009866]Done.

[00015946]Waiting for user confirm...
[00026002]Timeout, start upgrade automatically.

[00026126]Firmware upgrading[1]...
[00026607][07 00] Firmware upgrade start...
[00112223][07 00] Firmware upgrade finished successfully.
[00112286]Done.

[00112352]Version checking[2]...
[00112454][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00112612][08 00][00] v2.14.9.37 -> v2.14.9.37
[00112681][01 00][00] v2.47.4492 -> v2.47.4492
[00112743][01 01][00] v2.47.4492 -> v2.47.4492
[00112806][04 00][00] v1.29.0.63 -> v1.29.0.63
[00112893][09 00][00] v0.0.0.73 -> v0.0.0.73
[00112959]Done.

[00113019]Firmware upgrading[2]...
[00113463][07 00] Firmware upgrade start...
[00213685][07 00] Firmware upgrade finished successfully.
[00213751]Done.

[00213810]Version checking[3]...
[00213915][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00213993][08 00][00] v2.14.9.37 -> v2.14.9.37
[00214061][01 00][00] v2.47.4492 -> v2.47.4492
[00214122][01 01][00] v2.47.4492 -> v2.47.4492
[00214192][04 00][00] v1.29.0.63 -> v1.29.0.63
[00214276][09 00][00] v0.0.0.73 -> v0.0.0.73
[00214333]Done.

[00214397]Firmware upgrading[3]...
[00214828][07 00] Firmware upgrade start...
[00315127][07 00] Firmware upgrade finished successfully.
[00315195]Done.

[00315262]Version checking[4]...
[00315398][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00315495][08 00][00] v2.14.9.37 -> v2.14.9.37
[00315562][01 00][00] v2.47.4492 -> v2.47.4492
[00315624][01 01][00] v2.47.4492 -> v2.47.4492
[00315702][04 00][00] v1.29.0.63 -> v1.29.0.63
[00315778][09 00][00] v0.0.0.73 -> v0.0.0.73
[00315838]Done.

[00315902]Firmware upgrading[4]...
[00316328][07 00] Firmware upgrade start...
[00382575][07 00] Firmware upgrade finish without reboot.
[00422638][07 00] Firmware upgrade finished successfully.
[00422727]Done.

[00422792]Version checking[5]...
[00435365][07 00][05] device not detected.
[00435437][08 00][00] v2.14.9.37 -> v2.14.9.37
[00435503][01 00][00] v2.47.4492 -> v2.47.4492
[00435569][01 01][00] v2.47.4492 -> v2.47.4492
[00435636][04 00][00] v1.29.0.63 -> v1.29.0.63
[00435711][09 00][00] v0.0.0.73 -> v0.0.0.73
[00435777]Packet upgrade failed at version checking.



[00008887]========== remo-con disconnect. boot(15) ============
[00008951]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00009113]Packet upgrade start...

[00009184]Packet checking...
[00009252]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009314]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009381]Done.

[00009448]Version checking[1]...
[00009540][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009613][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009680][01 00][00] v2.47.4492 -> v2.47.4492
[00009745][01 01][00] v2.47.4492 -> v2.47.4492
[00009841][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009917][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009982]Done.

[00016064]Waiting for user confirm...
[00026125]Timeout, start upgrade automatically.

[00026248]Firmware upgrading[1]...
[00026691][07 00] Firmware upgrade start...
[00112311][07 00] Firmware upgrade finished successfully.
[00112377]Done.

[00112445]Version checking[2]...
[00112551][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00112617][08 00][00] v2.14.9.37 -> v2.14.9.37
[00112708][01 00][00] v2.47.4492 -> v2.47.4492
[00112769][01 01][00] v2.47.4492 -> v2.47.4492
[00112843][04 00][00] v1.29.0.63 -> v1.29.0.63
[00112911][09 00][00] v0.0.0.73 -> v0.0.0.73
[00112976]Done.

[00113033]Firmware upgrading[2]...
[00113467][07 00] Firmware upgrade start...
[00213754][07 00] Firmware upgrade finished successfully.
[00213817]Done.

[00213885]Version checking[3]...
[00213994][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00214078][08 00][00] v2.14.9.37 -> v2.14.9.37
[00214136][01 00][00] v2.47.4492 -> v2.47.4492
[00214218][01 01][00] v2.47.4492 -> v2.47.4492
[00214313][04 00][00] v1.29.0.63 -> v1.29.0.63
[00214385][09 00][00] v0.0.0.73 -> v0.0.0.73
[00214453]Done.

[00214516]Firmware upgrading[3]...
[00214962][07 00] Firmware upgrade start...
[00280840][07 00] Firmware upgrade finish without reboot.
[00320900][07 00] Firmware upgrade finished successfully.
[00320966]Done.

[00321028]Version checking[4]...
[00333596][07 00][05] device not detected.
[00333764][08 00][00] v2.14.9.37 -> v2.14.9.37
[00333823][01 00][00] v2.47.4492 -> v2.47.4492
[00333893][01 01][00] v2.47.4492 -> v2.47.4492
[00333965][04 00][00] v1.29.0.63 -> v1.29.0.63
[00334036][09 00][00] v0.0.0.73 -> v0.0.0.73
[00334103]Packet upgrade failed at version checking.



[00008676]========== remo-con disconnect. boot(15) ============
[00008743]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008806]Packet upgrade start...

[00008872]Packet checking...
[00008930]Packet vlink 01.04.0180 <-> 01.02.0160.
[00008995]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009061]Done.

[00009122]Version checking[1]...
[00009228][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009303][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009369][01 00][00] v2.47.4492 -> v2.47.4492
[00009429][01 01][00] v2.47.4492 -> v2.47.4492
[00009500][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009589][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009656]Done.

[00015733]Waiting for user confirm...
[00025800]Timeout, start upgrade automatically.

[00025929]Firmware upgrading[1]...
[00026378][07 00] Firmware upgrade start...
[00112819][07 00] Firmware upgrade finished successfully.
[00112888]Done.

[00112956]Version checking[2]...
[00113043][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00113110][08 00][00] v2.14.9.37 -> v2.14.9.37
[00113173][01 00][00] v2.47.4492 -> v2.47.4492
[00113233][01 01][00] v2.47.4492 -> v2.47.4492
[00113303][04 00][00] v1.29.0.63 -> v1.29.0.63
[00113410][09 00][00] v0.0.0.73 -> v0.0.0.73
[00113473]Done.

[00113533]Firmware upgrading[2]...
[00113968][07 00] Firmware upgrade start...
[00179854][07 00] Firmware upgrade finish without reboot.
[00219920][07 00] Firmware upgrade finished successfully.
[00219986]Done.

[00220054]Version checking[3]...
[00232620][07 00][05] device not detected.
[00232696][08 00][00] v2.14.9.37 -> v2.14.9.37
[00232763][01 00][00] v2.47.4492 -> v2.47.4492
[00232903][01 01][00] v2.47.4492 -> v2.47.4492
[00232984][04 00][00] v1.29.0.63 -> v1.29.0.63
[00233063][09 00][00] v0.0.0.73 -> v0.0.0.73
[00233126]Packet upgrade failed at version checking.



[00008797]========== remo-con disconnect. boot(15) ============
[00008863]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008928]Packet upgrade start...

[00008994]Packet checking...
[00009064]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009128]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009189]Done.

[00009257]Version checking[1]...
[00009344][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009413][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009475][01 00][00] v2.47.4492 -> v2.47.4492
[00009538][01 01][00] v2.47.4492 -> v2.47.4492
[00009605][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009694][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009760]Done.

[00015900]Waiting for user confirm...
[00025965]Timeout, start upgrade automatically.

[00026096]Firmware upgrading[1]...
[00026548][07 00] Firmware upgrade start...
[00077921][07 00] Firmware upgrade finish without reboot.
[00117987][07 00] Firmware upgrade finished successfully.
[00118049]Done.

[00118108]Version checking[2]...
[00130672][07 00][05] device not detected.
[00130748][08 00][00] v2.14.9.37 -> v2.14.9.37
[00130808][01 00][00] v2.47.4492 -> v2.47.4492
[00130875][01 01][00] v2.47.4492 -> v2.47.4492
[00130953][04 00][00] v1.29.0.63 -> v1.29.0.63
[00131033][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131091]Packet upgrade failed at version checking.



[00009353]========== remo-con disconnect. boot(15) ============
[00009417]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00009478]Packet upgrade start...

[00009550]Packet checking...
[00009617]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009679]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009745]Done.

[00009811]Version checking[1]...
[00022378][07 00][00] device not detected.
[00022610][08 00][00] v2.14.9.37 -> v2.14.9.37
[00022681][01 00][00] v2.47.4492 -> v2.47.4492
[00022748][01 01][00] v2.47.4492 -> v2.47.4492
[00022814][04 00][00] v1.29.0.63 -> v1.29.0.63
[00022907][09 00][00] v0.0.0.73 -> v0.0.0.73
[00024975]Packet upgrade failed at version checking.



[00008733]========== remo-con disconnect. boot(0) ============
[00008795]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008858]Packet upgrade start...

[00008922]Packet checking...
[00009015]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009081]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009147]Done.

[00009210]Version checking[1]...
[00009308][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009402][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009467][01 00][00] v2.47.4492 -> v2.47.4492
[00009525][01 01][00] v2.47.4492 -> v2.47.4492
[00009603][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009679][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009745]Done.

[00015824]Waiting for user confirm...
[00025941]Timeout, start upgrade automatically.

[00026073]Firmware upgrading[1]...
[00026504][07 00] Firmware upgrade start...
[00077657][07 00] Firmware upgrade finish failed (step = 5, err = 0xaa, sum = 0xa702).
[00087724]Done.

[00087790]Version checking[2]...
[00092882][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00092963][08 00][00] v2.14.9.37 -> v2.14.9.37
[00093029][01 00][00] v2.47.4492 -> v2.47.4492
[00093093][01 01][00] v2.47.4492 -> v2.47.4492
[00093189][04 00][00] v1.29.0.63 -> v1.29.0.63
[00093272][09 00][00] v0.0.0.73 -> v0.0.0.73
[00093337]Done.

[00093402]Firmware upgrading[2]...
[00093836][07 00] Firmware upgrade start...
[00180227][07 00] Firmware upgrade finished successfully.
[00180289]Done.

[00180355]Version checking[3]...
[00180445][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00180524][08 00][00] v2.14.9.37 -> v2.14.9.37
[00180587][01 00][00] v2.47.4492 -> v2.47.4492
[00180653][01 01][00] v2.47.4492 -> v2.47.4492
[00180818][04 00][00] v1.29.0.63 -> v1.29.0.63
[00180905][09 00][00] v0.0.0.73 -> v0.0.0.73
[00180969]Done.

[00181029]Firmware upgrading[3]...
[00181459][07 00] Firmware upgrade start...
[00281597][07 00] Firmware upgrade finished successfully.
[00281661]Done.

[00281750]Version checking[4]...
[00281836][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00281916][08 00][00] v2.14.9.37 -> v2.14.9.37
[00281979][01 00][00] v2.47.4492 -> v2.47.4492
[00282047][01 01][00] v2.47.4492 -> v2.47.4492
[00282157][04 00][00] v1.29.0.63 -> v1.29.0.63
[00282237][09 00][00] v0.0.0.73 -> v0.0.0.73
[00282293]Done.

[00282363]Firmware upgrading[4]...
[00282790][07 00] Firmware upgrade start...
[00383169][07 00] Firmware upgrade finished successfully.
[00383236]Done.

[00383295]Version checking[5]...
[00383430][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00383508][08 00][00] v2.14.9.37 -> v2.14.9.37
[00383573][01 00][00] v2.47.4492 -> v2.47.4492
[00383633][01 01][00] v2.47.4492 -> v2.47.4492
[00383701][04 00][00] v1.29.0.63 -> v1.29.0.63
[00383790][09 00][00] v0.0.0.73 -> v0.0.0.73
[00383858]Done.

[00383924]Firmware upgrading[5]...
[00384359][07 00] Firmware upgrade start...
[00450244][07 00] Firmware upgrade finish without reboot.
[00490314][07 00] Firmware upgrade finished successfully.
[00490380]Done.

[00490440]Version checking[6]...
[00503001][07 00][05] device not detected.
[00503083][08 00][00] v2.14.9.37 -> v2.14.9.37
[00503149][01 00][00] v2.47.4492 -> v2.47.4492
[00503211][01 01][00] v2.47.4492 -> v2.47.4492
[00503284][04 00][00] v1.29.0.63 -> v1.29.0.63
[00503390][09 00][00] v0.0.0.73 -> v0.0.0.73
[00503453]Packet upgrade failed at version checking.



[00008750]========== remo-con disconnect. boot(15) ============
[00008816]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008883]Packet upgrade start...

[00008952]Packet checking...
[00009020]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009182]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009250]Done.

[00009317]Version checking[1]...
[00009427][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009504][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009566][01 00][00] v2.47.4492 -> v2.47.4492
[00009657][01 01][00] v2.47.4492 -> v2.47.4492
[00009730][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009818][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009887]Done.

[00016079]Waiting for user confirm...
[00026143]Timeout, start upgrade automatically.

[00026304]Firmware upgrading[1]...
[00026743][07 00] Firmware upgrade start...
[00078425][07 00] Firmware upgrade finish without reboot.
[00118495][07 00] Firmware upgrade finished successfully.
[00118561]Done.

[00118628]Version checking[2]...
[00131196][07 00][05] device not detected.
[00131278][08 00][00] v2.14.9.37 -> v2.14.9.37
[00131348][01 00][00] v2.47.4492 -> v2.47.4492
[00131415][01 01][00] v2.47.4492 -> v2.47.4492
[00131485][04 00][00] v1.29.0.63 -> v1.29.0.63
[00131595][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131657]Packet upgrade failed at version checking.



[00010808]========== remo-con disconnect. boot(15) ============
[00010874]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00010939]Packet upgrade start...

[00011012]Packet checking...
[00011082]Packet vlink 01.04.0180 <-> 01.02.0160.
[00011147]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00011215]Done.

[00011283]Version checking[1]...
[00011387][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00011490][08 00][00] v2.14.9.37 -> v2.14.9.37
[00011555][01 00][00] v2.47.4492 -> v2.47.4492
[00011624][01 01][00] v2.47.4492 -> v2.47.4492
[00011697][04 00][00] v1.29.0.63 -> v1.29.0.63
[00011782][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00011846]Done.

[00017424]Waiting for user confirm...
[00027492]Timeout, start upgrade automatically.

[00027627]Firmware upgrading[1]...
[00028094][07 00] Firmware upgrade start...
[00113844][07 00] Firmware upgrade finished successfully.
[00114037][09 00] Firmware upgrade start...
[00193956][09 00] Firmware upgrade finished successfully.
[00194020]Done.

[00194088]Version checking[2]...
[00194197][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00194270][08 00][00] v2.14.9.37 -> v2.14.9.37
[00194337][01 00][00] v2.47.4492 -> v2.47.4492
[00194406][01 01][00] v2.47.4492 -> v2.47.4492
[00194484][04 00][00] v1.29.0.63 -> v1.29.0.63
[00194577][09 00][05] v0.0.0.73 -> v0.0.0.73
[00194666]Done.

[00194731]Firmware upgrading[2]...
[00195174][07 00] Firmware upgrade start...
[00281631][07 00] Firmware upgrade finished successfully.
[00281700]Done.

[00281768]Version checking[3]...
[00281900][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00281982][08 00][00] v2.14.9.37 -> v2.14.9.37
[00282052][01 00][00] v2.47.4492 -> v2.47.4492
[00282117][01 01][00] v2.47.4492 -> v2.47.4492
[00282200][04 00][00] v1.29.0.63 -> v1.29.0.63
[00282280][09 00][05] v0.0.0.73 -> v0.0.0.73
[00282375]Done.

[00282442]Firmware upgrading[3]...
[00282866][07 00] Firmware upgrade start...
[00382932][07 00] Firmware upgrade finished successfully.
[00382999]Done.

[00383067]Version checking[4]...
[00383153][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00383226][08 00][00] v2.14.9.37 -> v2.14.9.37
[00383295][01 00][00] v2.47.4492 -> v2.47.4492
[00383366][01 01][00] v2.47.4492 -> v2.47.4492
[00383436][04 00][00] v1.29.0.63 -> v1.29.0.63
[00383522][09 00][05] v0.0.0.73 -> v0.0.0.73
[00383591]Done.

[00383660]Firmware upgrading[4]...
[00384094][07 00] Firmware upgrade start...
[00449972][07 00] Firmware upgrade finish without reboot.
[00490039][07 00] Firmware upgrade finished successfully.
[00490109]Done.

[00490179]Version checking[5]...
[00502738][07 00][05] device not detected.
[00502863][08 00][00] v2.14.9.37 -> v2.14.9.37
[00502926][01 00][00] v2.47.4492 -> v2.47.4492
[00502994][01 01][00] v2.47.4492 -> v2.47.4492
[00503069][04 00][00] v1.29.0.63 -> v1.29.0.63
[00503265][09 00][05] v0.0.0.73 -> v0.0.0.73
[00503333]Packet upgrade failed at version checking.



[00008746]========== remo-con disconnect. boot(15) ============
[00008811]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008880]Packet upgrade start...

[00008954]Packet checking...
[00009023]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009092]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009164]Done.

[00009249]Version checking[1]...
[00009394][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009472][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009544][01 00][00] v2.47.4492 -> v2.47.4492
[00009608][01 01][00] v2.47.4492 -> v2.47.4492
[00009686][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009775][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009846]Done.

[00015946]Waiting for user confirm...
[00026011]Timeout, start upgrade automatically.

[00026170]Firmware upgrading[1]...
[00026608][07 00] Firmware upgrade start...
[00112426][07 00] Firmware upgrade finished successfully.
[00112498]Done.

[00112567]Version checking[2]...
[00112656][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00112725][08 00][00] v2.14.9.37 -> v2.14.9.37
[00112796][01 00][00] v2.47.4492 -> v2.47.4492
[00112866][01 01][00] v2.47.4492 -> v2.47.4492
[00112943][04 00][00] v1.29.0.63 -> v1.29.0.63
[00113067][09 00][00] v0.0.0.73 -> v0.0.0.73
[00113130]Done.

[00113200]Firmware upgrading[2]...
[00113629][07 00] Firmware upgrade start...
[00179931][07 00] Firmware upgrade finish without reboot.
[00219998][07 00] Firmware upgrade finished successfully.
[00220070]Done.

[00220136]Version checking[3]...
[00232705][07 00][05] device not detected.
[00232793][08 00][00] v2.14.9.37 -> v2.14.9.37
[00232853][01 00][00] v2.47.4492 -> v2.47.4492
[00232918][01 01][00] v2.47.4492 -> v2.47.4492
[00233018][04 00][00] v1.29.0.63 -> v1.29.0.63
[00233098][09 00][00] v0.0.0.73 -> v0.0.0.73
[00233168]Packet upgrade failed at version checking.



[00008708]========== remo-con disconnect. boot(15) ============
[00008782]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008852]Packet upgrade start...

[00008924]Packet checking...
[00008999]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009070]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009135]Done.

[00009203]Version checking[1]...
[00009303][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009401][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009474][01 00][00] v2.47.4492 -> v2.47.4492
[00009537][01 01][00] v2.47.4492 -> v2.47.4492
[00009625][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009713][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009786]Done.

[00015380]Waiting for user confirm...
[00025443]Timeout, start upgrade automatically.

[00025590]Firmware upgrading[1]...
[00026017][07 00] Firmware upgrade start...
[00112496][07 00] Firmware upgrade finished successfully.
[00112568]Done.

[00112637]Version checking[2]...
[00112736][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00112820][08 00][00] v2.14.9.37 -> v2.14.9.37
[00112891][01 00][00] v2.47.4492 -> v2.47.4492
[00112965][01 01][00] v2.47.4492 -> v2.47.4492
[00113036][04 00][00] v1.29.0.63 -> v1.29.0.63
[00113116][09 00][00] v0.0.0.73 -> v0.0.0.73
[00113188]Done.

[00113261]Firmware upgrading[2]...
[00113700][07 00] Firmware upgrade start...
[00178413][07 00] Firmware upgrade finish without reboot.
[00218484][07 00] Firmware upgrade finished successfully.
[00218554]Done.

[00218622]Version checking[3]...
[00231195][07 00][05] device not detected.
[00231277][08 00][00] v2.14.9.37 -> v2.14.9.37
[00231346][01 00][00] v2.47.4492 -> v2.47.4492
[00231417][01 01][00] v2.47.4492 -> v2.47.4492
[00231509][04 00][00] v1.29.0.63 -> v1.29.0.63
[00231607][09 00][00] v0.0.0.73 -> v0.0.0.73
[00231678]Packet upgrade failed at version checking.



[00008700]========== remo-con disconnect. boot(15) ============
[00008768]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008926]Packet upgrade start...

[00009003]Packet checking...
[00009079]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009150]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009220]Done.

[00009291]Version checking[1]...
[00009415][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009504][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009579][01 00][00] v2.47.4492 -> v2.47.4492
[00009650][01 01][00] v2.47.4492 -> v2.47.4492
[00009725][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009815][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009888]Done.

[00015980]Waiting for user confirm...
[00026054]Timeout, start upgrade automatically.

[00026198]Firmware upgrading[1]...
[00026637][07 00] Firmware upgrade start...
[00078049][07 00] Firmware upgrade finish without reboot.
[00118122][07 00] Firmware upgrade finished successfully.
[00118198]Done.

[00118269]Version checking[2]...
[00130837][07 00][05] device not detected.
[00130927][08 00][00] v2.14.9.37 -> v2.14.9.37
[00131001][01 00][00] v2.47.4492 -> v2.47.4492
[00131075][01 01][00] v2.47.4492 -> v2.47.4492
[00131149][04 00][00] v1.29.0.63 -> v1.29.0.63
[00131245][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131316]Packet upgrade failed at version checking.



[00008798]========== remo-con disconnect. boot(15) ============
[00008861]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00008926]Packet upgrade start...

[00009004]Packet checking...
[00009101]Packet vlink 01.04.0180 <-> 01.02.0160.
[00009174]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00009243]Done.

[00009313]Version checking[1]...
[00009435][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00009522][08 00][00] v2.14.9.37 -> v2.14.9.37
[00009599][01 00][00] v2.47.4492 -> v2.47.4492
[00009662][01 01][00] v2.47.4492 -> v2.47.4492
[00009736][04 00][00] v1.29.0.63 -> v1.29.0.63
[00009816][09 00][00] v0.0.0.73 -> v0.0.0.73
[00009889]Done.

[00015981]Waiting for user confirm...
[00026186]Timeout, start upgrade automatically.

[00026331]Firmware upgrading[1]...
[00026797][07 00] Firmware upgrade start...
[00078480][07 00] Firmware upgrade finish without reboot.
[00118554][07 00] Firmware upgrade finished successfully.
[00118629]Done.

[00118702]Version checking[2]...
[00131270][07 00][05] device not detected.
[00131374][08 00][00] v2.14.9.37 -> v2.14.9.37
[00131447][01 00][00] v2.47.4492 -> v2.47.4492
[00131521][01 01][00] v2.47.4492 -> v2.47.4492
[00131614][04 00][00] v1.29.0.63 -> v1.29.0.63
[00131705][09 00][00] v0.0.0.73 -> v0.0.0.73
[00131774]Packet upgrade failed at version checking.



[00012785]========== remo-con disconnect. boot(15) ============
[00012854]Packet [C:\OSMO_FW_V01.04.01.80.bin] detected, card sn [0xb1621faa].
[00012927]Packet upgrade start...

[00013006]Packet checking...
[00013080]Packet vlink 01.04.0180 <-> 01.02.0160.
[00013149]Record vlink 01.00.0119 <-> 01.00.0118 (flow = 0).
[00013223]Done.

[00013318]Version checking[1]...
[00013433][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00013517][08 00][00] v2.14.9.37 -> v2.14.9.37
[00013593][01 00][00] v2.47.4492 -> v2.47.4492
[00013661][01 01][00] v2.47.4492 -> v2.47.4492
[00013742][04 00][00] v1.29.0.63 -> v1.29.0.63
[00013822][09 00][00] v0.0.0.0 -> v0.0.0.73 need upgrade.
[00013896]Done.

[00019471]Waiting for user confirm...
[00029547]Timeout, start upgrade automatically.

[00029719]Firmware upgrading[1]...
[00030148][07 00] Firmware upgrade start...
[00115858][07 00] Firmware upgrade finished successfully.
[00115959][09 00] Firmware upgrade start...
[00169417][09 00] Firmware upgrade finished successfully.
[00169491]Done.

[00169565]Version checking[2]...
[00174678][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00174764][08 00][00] v2.14.9.37 -> v2.14.9.37
[00174830][01 00][00] v2.47.4492 -> v2.47.4492
[00174898][01 01][00] v2.47.4492 -> v2.47.4492
[00174985][04 00][00] v1.29.0.63 -> v1.29.0.63
[00175148][09 00][05] v0.0.0.73 -> v0.0.0.73
[00175219]Done.

[00175294]Firmware upgrading[2]...
[00175747][07 00] Firmware upgrade start...
[00261911][07 00] Firmware upgrade finished successfully.
[00261989]Done.

[00262061]Version checking[3]...
[00262162][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00262244][08 00][00] v2.14.9.37 -> v2.14.9.37
[00262314][01 00][00] v2.47.4492 -> v2.47.4492
[00262389][01 01][00] v2.47.4492 -> v2.47.4492
[00262470][04 00][00] v1.29.0.63 -> v1.29.0.63
[00262571][09 00][05] v0.0.0.73 -> v0.0.0.73
[00262647]Done.

[00262715]Firmware upgrading[3]...
[00263150][07 00] Firmware upgrade start...
[00328511][07 00] Firmware upgrade finish failed (step = 5, err = 0xaa, sum = 0xa702).
[00338582]Done.

[00338658]Version checking[4]...
[00343755][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00343843][08 00][00] v2.14.9.37 -> v2.14.9.37
[00343917][01 00][00] v2.47.4492 -> v2.47.4492
[00343988][01 01][00] v2.47.4492 -> v2.47.4492
[00344071][04 00][00] v1.29.0.63 -> v1.29.0.63
[00344164][09 00][05] v0.0.0.73 -> v0.0.0.73
[00344237]Done.

[00344308]Firmware upgrading[4]...
[00344758][07 00] Firmware upgrade start...
[00431137][07 00] Firmware upgrade finished successfully.
[00431234]Done.

[00431309]Version checking[5]...
[00431447][07 00][00] v1.0.9.14 -> v1.0.9.40 need upgrade.
[00431531][08 00][00] v2.14.9.37 -> v2.14.9.37
[00431606][01 00][00] v2.47.4492 -> v2.47.4492
[00431677][01 01][00] v2.47.4492 -> v2.47.4492
[00431779][04 00][00] v1.29.0.63 -> v1.29.0.63
[00431878][09 00][05] v0.0.0.73 -> v0.0.0.73
[00431951]Done.

[00432025]Firmware upgrading[5]...
[00432477][07 00] Firmware upgrade start...
[00498642][07 00] Firmware upgrade finish without reboot.
[00538716][07 00] Firmware upgrade finished successfully.
[00538788]Done.

[00538860]Version checking[6]...
[00551434][07 00][05] device not detected.
[00551516][08 00][00] v2.14.9.37 -> v2.14.9.37
[00551590][01 00][00] v2.47.4492 -> v2.47.4492
[00551755][01 01][00] v2.47.4492 -> v2.47.4492
[00551834][04 00][00] v1.29.0.63 -> v1.29.0.63
[00551929][09 00][05] v0.0.0.73 -> v0.0.0.73
[00552000]Packet upgrade failed at version checking.

my serial number for osmo 06NDCK100B00S5

help dji-amy

cebola47 Posted at 2015-12-31 10:23
help dji-amy

I am afraid the power off during the upgrade had made the Osmo wifi module problem. Please contact your local dealer or DJI technical support for repair.

cebola47 Posted at 2015-12-30 18:30
OK. I did it. but for my mistake. I stopped the update before completion, now when I update again of ...

Did you upgrade it by micro SD card?  What firmware version did you upgrade? Isit the bug-fix version released at 2015/12/27?

wifi is working, I did the update of the day 12/27/2015 by sd. Now the yellow LED flashes.

sorry, today I saw that  unstable wifi. sometimes it works sometimes no. yellow LED blacked out. the problem went wrong formatted sd.

Can you try a forced update.

this procedure is to reset the wifi

My osmo not now fixed but the wifi. and can not install firmware always error.

cebola47 Posted at 2016-1-3 08:56
My osmo not now fixed but the wifi. and can not install firmware always error.

não conseguiu cebola?

Visita nosso grupo do face.
https://www.facebook.com/groups/djiosmobrasil/

sorry, today I saw that  unstable wifi. sometimes it works sometimes no. yellow LED blacked out. the problem went wrong formatted sd.
help

after all the procedures described above. My osmo not updated firmware and the wifi is instavel. help dji-amy

unsteady
after all the procedures described above. My osmo not updated firmware and the wifi is unsteady . help dji-amy

cebola47 Posted at 2016-1-5 00:21
unsteady
after all the procedures described above. My osmo not updated firmware and the wifi is uns ...

Sorry for the late reply, but from your upgrade log, the [07 00] wifi module is not detected. This can't be recovered by you, please contact your local  dealer or DJI technical support for repair. Please remember, never interrupt the update process and make sure the battery is full before the update to avoid the power off.

cebola47 Posted at 2016-1-2 05:19
this procedure is to reset the wifi

Yes, this is for wifi reset, in your case, reboot can't help you upgrade again, please try to contact your local dealer or DJI technical support for repair.

I'm with these tickets, # 242511 # 241626 # 240886 # 239807. please how can I fix it.

cebola47 Posted at 2016-1-8 04:45
I'm with these tickets, # 242511 # 241626 # 240886 # 239807. please how can I fix it.

I will let the support take care with your ticket ASAP.