So,Ripping apart my DJI standard remote (Shh don't let them know), and one key thing I cannot find any information on is the dBi for the 2.4ghz and 5.8ghz .

Why you ask?, well.. Went and added in the Argtek range extender to a DJI Phantom 3 Standard and the antenna that come with it, might be just a tad cheap/weak or they are just right for the remotes specs.

So surfing Amazon for a set of new panels and dual band antenna but not sure what the dBi cap the remote itself has.

Everything there is to know:



https://fccid.io/SS3

Kneepuck Posted at 2016-2-24 14:11
Everything there is to know:

Nice work!

Kneepuck Posted at 2016-2-23 22:11
Everything there is to know:

Thank You!  My brain is now happy again.

So is the argtek worth doing then ?

coopy1975@gmail Posted at 2017-3-1 07:14
So is the argtek worth doing then ?

For me it has been perfect.  Others report that the DBS mod is far better, but I did not go that route.
If you do get one, here are some tips.
Make sure that you reseal the connectors in the controller to prevent signal leakage.
I used hot glue.
If you want to go the other route, here is the link.
https://www.amazon.com/dp/B01A93 ... oliid=I85TKT9FTFO9J

coopy1975@gmail Posted at 2017-3-1 07:14
So is the argtek worth doing then ?

Yup.  Before Argtek I never got farther than 600m now I get 2700m.

So that's near 4 times better. However its a good idea as some areas have high terrestrial interference and the extra signal gives you an added safety margin so you won't lose signals so easily in areas with T.I.

http://healthydrones.com/main?fl ... _id=GENERALOverview