Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline
|
I dont have a Microsoft account...... can you just post it some other way..... I find that the I pads work great for this task and automatically compress to make it work.
Or post the video on you tube with a link in the description.
Is the prop making a funny noise ? If you feel the props are even questionable I would replace them , also I would replace the Locking mechanism as well, I replace mine 3 times a year, it is inexpoensive and good insurance. Be sure to blow out the motors with compressed air as well, I find that some dust and small debris seem to find there way in there .
Also check the blade tips at eye level during a hover, compare them to the others ( use safety glasses ) Make sure they are in line and not out of alignment , a bent "Main" shaft will cause strange noises and wicked vibration . This is a task that was common with RC helicopters to get equal pitch out of the main rotor .
Have you had any tipovers that would cause damage to the Motors ?
One other note if you are going to replace the Props and locks, If you dont have the 1345T setup, get it, and dont use carbon fibre blades on the Inspire, they put to much strain on the locking mechanism during fast climbouts and braking. On the Phantom series carbon fibre is ok but in my opinion not a good fit on Inspire, be sure to get Genuine DJI plastic blades. ( be sure to use lock tite on the screws for the Locking mechanism for the props)
donnie
|
|