The GEO firmware is now available for Android, IOS will be soon. http://www.dji.com/flysafe/geo-system

Ken,

I see the beta GO app (Android) and aircraft firmware is no longer available to download on the GEO System page.

Does this mean that the GEO system firmware is now included in 1.9.1.10, and software in Go app (Android) 2.8.2 ?

simonm Posted at 2016-7-6 00:45
Ken,

I see the beta GO app (Android) and aircraft firmware is no longer available to download on th ...

That is correct, it's already in the aircraft firmware.
Also, you have to use Reply if you want me to be notified of your post.

DJI-Ken Posted at 2016-7-6 00:51
That is correct, it's already in the aircraft firmware.
Also, you have to use Reply if you want me ...

Thanks that's good news. Hopefully not too long before we get the IOS upgrade.

simonm Posted at 2016-7-6 00:56
Thanks that's good news. Hopefully not too long before we get the IOS upgrade.

Apple usually takes a little longer to approve apps. I sent an email to see if they know roughly when it will be available.

DJI-Ken Posted at 2016-7-5 10:09
Apple usually takes a little longer to approve apps. I sent an email to see if they know roughly w ...

this is great news Ken....

Hey where has DJI Dave been? I not seen him posting anything  

Rich

RichJ53 Posted at 2016-7-6 13:22
this is great news Ken....

Hey where has DJI Dave been? I not seen him posting anything  

IOS 2.8.4 is already out. I knew it would be quick

DJI-Ken Posted at 2016-7-6 07:37
IOS 2.8.4 is already out. I knew it would be quick

wow that was fast... installed it already

Rich

RichJ53 Posted at 2016-7-7 00:04
wow that was fast... installed it already

Rich

Yes it was

I think I'll pass.

R&L Aerial  Posted at 2016-7-7 05:20
I think I'll pass.

That's why there's a enable/disable slider for GEO.

DJI-Ken Posted at 2016-7-7 05:32
That's why there's a enable/disable slider for GEO.

For now.....

R&L Aerial  Posted at 2016-7-6 15:14
For now.....

Once it is mandatory, I'll be selling.

DJI-Ken Posted at 2016-7-7 04:13
Yes it was

Hi Ken,

The other day I forgot to turn of my remote, and then constant beeping from the controller kept emitting.

I charged it turned it back on, and the beeping is still there.  Once I move the stick, the sound goes away, but always comes back when i reboot. Any idea of whats happening.

I also know its updated because i changed to an HDMI module and no firmware update needed. Please help if you can thanks.

Turbo TYELIM Posted at 2016-8-6 23:05
Hi Ken,

The other day I forgot to turn of my remote, and then constant beeping from the controlle ...

Hi,

I have had this happen too. I believe you need to recalibrate the remote. go to the DJI Go App and start the camera mode. Click on the remote controller settings tab. Select controller calibration  then you start the calibration process.



Rich

RichJ53 Posted at 2016-8-8 02:54
Hi,

I have had this happen too. I believe you need to recalibrate the remote. go to the DJI Go Ap ...

Thank you! I will try this once I get home.

Turbo TYELIM Posted at 2016-8-7 16:18
Thank you! I will try this once I get home.

You are welcome and I hope this works for you....

Rich

Turbo TYELIM Posted at 2016-8-7 14:05
Hi Ken,

The other day I forgot to turn of my remote, and then constant beeping from the controlle ...

Did the RC calibration do the trick?

DJI-Ken Posted at 2016-8-9 01:46
Did the RC calibration do the trick?

I did not do the calibration yet, however, when I just move the left stick around the sound stops. Did that for like two days, then on the third day no beeping when i started up the remote. The P4 flew great no issues.

Still want to try the calibration thing do.

Turbo TYELIM Posted at 2016-8-15 06:35
I did not do the calibration yet, however, when I just move the left stick around the sound stops. ...

That's strange, it's supposed to start beeping after several minutes to remind you in case you forget to turn it off. Than after moving the sticks it will stop.
That's good it's working fine now. I would still do a RC calibration.

DJI-Ken Posted at 2016-8-16 00:10
That's strange, it's supposed to start beeping after several minutes to remind you in case you for ...

Hi Ken, Now I have another remote control problem lol.  Couple days ago I updated the controller, since then I kept getting the green screen, weak transmission signal, screen cutting in and out. Please help if you have any idea as to what is going on here.

I run the P4, with an HDMI input on the controller. Everything worked fine before the update.

Turbo TYELIM Posted at 2016-11-20 15:43
Hi Ken, Now I have another remote control problem lol.  Couple days ago I updated the controller,  ...

Is the device you are using on the DJI recommended devices?

Recommended Devices       
ios: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPod touch 6, iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s and iPhone 6s Plus.
Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD
*Support for additional Android devices available as testing and development continues.

DJI-Ken Posted at 2016-11-21 14:31
Is the device you are using on the DJI recommended devices?

Recommended Devices       

Yes iphone 6 plus, ipad mini

Turbo TYELIM Posted at 2016-11-21 18:39
Yes iphone 6 plus, ipad mini

Can you please post a video of what you are seeing?

DJI-Ken Posted at 2016-11-22 01:32
Can you please post a video of what you are seeing?

Ok weirdest thing just happened. I went to record the problem, now the problem is gone. haha I am at work and tested it in the parking lot. So I will go back to my house after, and see if I get that green screen, and weak transmission stuff. Thanks Ken for your feedback, I'll let you know how it goes once i get home.

Turbo TYELIM Posted at 2016-11-22 07:19
Ok weirdest thing just happened. I went to record the problem, now the problem is gone. haha I am  ...

Just like your car, it makes a noise and you take it to the shop and it won't make the noise again until you get home

DJI-Ken Posted at 2016-11-21 17:21
Just like your car, it makes a noise and you take it to the shop and it won't make the noise again until you get home

Pls help turned on my P4 and this is what I got. Ambient light to low. Even with a huge flashlight or in the day, the camera is barely  showing anything.

DJI-Ken Posted at 2016-11-21 17:21
Just like your car, it makes a noise and you take it to the shop and it won't make the noise again until you get home

Pls help turned on my P4 and the pop up says Ambient light to low. Even with a huge flashlight or in the day, the camera is barely  showing anything.