My gimbal usually stays level, but sometimes it comes out of a turn and it looks like this. The fix is holding c2 and turning the exposure dial on the rc (2:58 - 3:30 in video)



Been raining so much here, even when was at Stanford on Monday, couldn't get anything more. It started pouring right when caught her here but I'll do more testing. I think it has to do with the wind. Usually it's not bad at all, but this was pretty bad tilt coming out of a turn.

So the C2 and exposure wheel works for you? Are you using an iPhone or Android?
My thread on C2+Exp wheel on Android not working

http://forum.dji.com/thread-79232-1-1.html

AGLyons Posted at 2017-1-12 11:47
So the C2 and exposure wheel works for you? Are you using an iPhone or Android?
My thread on C2+Exp wheel on Android not working

It works but running litchi app and 1.2.9 firmware. I'm sure they could adjust for drone tilt due to wind maybe. It's probably more complicated than it seems.

AGLyons Posted at 2017-1-12 11:47
So the C2 and exposure wheel works for you? Are you using an iPhone or Android?
My thread on C2+Exp wheel on Android not working

Mine neither. When I release the c2 button it opens up camera settings, as per how I binded it. It's as if it doesn't recognize the long press.
I do have "long press" set to gimbal in that setting...

AGLyons Posted at 2017-1-12 11:47
So the C2 and exposure wheel works for you? Are you using an iPhone or Android?
My thread on C2+Exp wheel on Android not working

Oh sorry forgot it's android 6. I have c2 set as zoom in on hold, at 4k it's basically disabled.