Please select Into the mobile phone version | Continue to access the computer ver.
Cannot connect
882 7 2017-1-15
Uploading and Loding Picture ...(0/1)
o(^-^)o
NJguy67
New

United States
Offline

I haven't flown my Phantom 2 in quite a while. Probably close to two years. I went to fly it recently, everything is charged up with full batteries. I turned everything on in the proper sequence then went to calibrate the compass on the Phantom. After doing so it seems the RC is not connecting to the Phantom, I get no response when playing with the joysticks on the RC. What to do?
2017-1-15
Use props
fansd00e13f0
New

Namibia
Offline

I have the same proplem wont to here how to tix it
2017-1-15
Use props
Harbourside
Captain
Flight distance : 6467 ft
United Kingdom
Offline

First thing is to connect to the PT2 Assistant and check for firmware updates on both the Transmitter and Phantom.
The process for linking the Transmitter to the Phantom is in the manual.
2017-1-15
Use props
NJguy67
New

United States
Offline

Harbourside Posted at 2017-1-15 10:25
First thing is to connect to the PT2 Assistant and check for firmware updates on both the Transmitter and Phantom.
The process for linking the Transmitter to the Phantom is in the manual.

I don't see anything about connecting to PT2 Assistant in the manual I have. Am I connecting the RC or the range extended to my computer via a USP? And the Phantom as well?
2017-1-15
Use props
Harbourside
Captain
Flight distance : 6467 ft
United Kingdom
Offline

There are 2 DJI programs for Windows or Mac.
The PT2 Assistant is for the Phantom, connect via the front mini USB port.
The RC Assistant is for the transmitter, connect via the mini USB port on the bottom, or inside if you have the older transmitter.

2017-1-15
Use props
NJguy67
New

United States
Offline

Harbourside Posted at 2017-1-15 12:10
There are 2 DJI programs for Windows or Mac.
The PT2 Assistant is for the Phantom, connect via the front mini USB port.
The RC Assistant is for the transmitter, connect via the mini USB port on the bottom, or inside if you have the older transmitter.

Thanks for the assistance. I downloaded both the Phantom Assistant and the RC Assistant. Connected both calibrated and updated both. Went outside turned everything on, DJI Vision App is connected and says ready to fly, have green flashing lights but nothing. Nothing happens on Phantom when I move the sticks.
2017-1-15
Use props
Harbourside
Captain
Flight distance : 6467 ft
United Kingdom
Offline

You mean when you do the CSC the motors don't start ?
You have flashing Green rear LED's correct ? So the transmitter is linked.
Are both S1 and S2 switches up ?
2017-1-15
Use props
NJguy67
New

United States
Offline

Not sure what CSC means.
Yes S1 & S2 switches are both up.
2017-1-16
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules