Please select Into the mobile phone version | Continue to access the computer ver.
After shoot photo - srw-60g reconnecting link
726 2 2017-2-4
Uploading and Loding Picture ...(0/1)
o(^-^)o
Zlosnik
lvl.1
Flight distance : 33117 ft

Poland
Offline

Hi. After I take a photo used start\stop, inoticed that the preview in application Dji-GO it returns only after about 8-10 secounds. I checked and after take photos, srw on simply fixes over if it loses the connection with the camera via hdmi, and only after a while back. My camera: canon 7 d mark II.
2017-2-4
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Just to clarify, has this been happing since set up, or was it after a firmware update or hard landing? Could you provide a list of your set up?
2017-2-4
Use props
Zlosnik
lvl.1
Flight distance : 33117 ft

Poland
Offline


The problem is from the beginning, before it was made any update.

Set up:
Matrice 600 Pro
SRW-60G on Matrice
SRW-60G on Ronin-mx
Ronin-MX
Dji START/STOP and cable RSS for Canon 7D Mark II
and Canon 7D MarkII

Canon is connecting via cable mini HDMI - HDMI for SRW-60G transmitter on gimbal
Transmitter is connecting powered cable in LB-port on a Gimbal.
SRW-60G receiver on matrice 600 pro is connecting kable hdmi-micro hdmi for unit lightbridge 2 on matrice 600 pro.
Power signal antenna beetwen remote controller and matrice 600 in application dji-go display is about 20-30dBu.
Canon is set up for non-mirroring signal video.
2017-2-4
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules