Hey everyone,
I wanted to bring your attention to an accessory that we've recently introduced.
Today, the industrial application of drones requires more than a just flying platform. Thanks to the leading technology of DJI drones, industrial users are able to integrate their DJI drones with third-party modules, develop more functions to meet their needs, and make drone operation easier even for industrial use.
In the public safety sector, drones, with their maneuverability and flexibility, can substitute for manpower to get to areas with little access and drop relief supplies such as medicine, food and first-aid tools to a designated point.
The Matrice 600 Series Remote Controller Channel Expansion Kit has eight switches and knobs available for each able to be mapped to its own channel, making the control of non-DJI modules easier and creates an integrated solution for industrial drone application.
_________________________________
Installation
Remove the original RC port module first, insert the PCB of the new module into the back of the remote controller, connect the three flat cables and lock the black buckles.
Then mount the Channel Expansion Module on the handle of the remote controller. Finally, finish channel mapping in DJI Assistant 2 to set up control of third-party modules. (Detailed
mounting instructions please refer to the User Guide of Matrice 600 Series Remote Controller Channel Expansion Kit.) Below is how the RC looks like when finishing installation.
_________________________________ Channel Mapping Instructions First, connect M600 Pro to a PC and enter DJI Assistant 2. Click “Tool” on the left of the interface and enter “Function Channel” page to customize the control function of F3-F8 Channel based on personal operation habits and which port(s) on the flight controller is connecting with the third-party module.Note the Assistant 2 screenshots below.
Now you can use the Remote Controller Channel Expansion Kit to control third-party modules!
|