Please select Into the mobile phone version | Continue to access the computer ver.
Mavic Pro Vision Driver Problem Win7
1744 1 2017-3-18
Uploading and Loding Picture ...(0/1)
o(^-^)o
PushSky
lvl.4
Flight distance : 554925 ft
United States
Offline

Hello,

Trying to perform a "Vision Calibration" with my Mavic Pro on a Win 7 64 system.  I'm getting "reboot drone" message and DJI Assistant v1.10 is displaying a "frame error" and won't begin the calibration process.  

Looking in the device manager Windows refuses to start the "Vision (Interface3)" driver due to a digital signature issue.  

Has anyone come up with a solution?  I searched but didn't find anything that helps with Win7.

Any help would be appreciated.  

Roger

Here is the Win7 message:  
dji.JPG
2017-3-18
Use props
PushSky
lvl.4
Flight distance : 554925 ft
United States
Offline

Of course, shortly after posting this I found a page which suggested pressing F8 while booting into Win7.  There you have the option of disabling digital driver signatures.  When I booted this way I was able to perform the vision calibration.  It was a pain but it worked.

DJI, when will  address the driver issue?
2017-3-18
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules