Please select Into the mobile phone version | Continue to access the computer ver.
why can't I find the most recent firmware???
815 15 2017-3-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
Wash
lvl.1
United States
Offline

<RANT>
WOW...  I'm SO frustrated with this product.    ok, so the firmware developers didn't really test the update process...  I can relate to that being a software developer!  Don't like it but i understand!    BUT not being able to find the stupid .bin file to update in case the firmware update fails is the MOST annoying and may I even say D*$k move ever???       you sell me a product that from all accounts in the forums and google, failed firmware happens all the time. BTW: finding how to resolve a problem is impossible because there are so many failed versions and everyone complaints and gives different opinions.  (hey DJI, try hiring a Sigma Six person and they will tell you after paying $100K that customer satisfaction with the update process is LOW and fixing said update process will reduce you calls to customer service).
<QUESTION>
ANYWAY,  where in all glory and splendor of the infinite universe can I find my Phantom 3 Standard new firmware???
</QUESTION>

Appentaly, I can't downgrade... the drone is screaming and yelling at me and log say that downgrade is not apossible!!   (again, I say... this process is really and totally JACKED UP!)

</RANT>
2017-3-28
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

Perhaps they are updating the webpages?
http://www.dji.com/phantom-3-standard/info#downloads


RedHotPoker
2017-3-28
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

Mine are still readily available... ;-$
http://www.dji.com/phantom-3-pro/info#downloads


RedHotPoker
2017-3-28
Use props
G_Sig
Captain
Flight distance : 9109311 ft
Iceland
Offline

This site also. Just remember to put it on formatted card.Phantom 3 Standard
2017-3-28
Use props
Wash
lvl.1
United States
Offline

the Standard version does not show any downloads like the professional does... only zip/pdf files downloads !!  
2017-3-28
Use props
RedHotPoker
Captain
Flight distance : 165105 ft
Canada
Offline

Wash Posted at 2017-3-28 14:40
the Standard version does not show any downloads like the professional does... only zip/pdf files downloads !!

Yes, not sure why. Perhaps there are updates being produced as we speak. ;-)

Unless there is a webpage malfunction on the Standard section..


RedHotPoker
2017-3-28
Use props
Wash
lvl.1
United States
Offline

yes maybe so...  but they issued the upgrade and totally screwed my drone...     at least they should have allowed the older version to be available
2017-3-28
Use props
DJI Natalia
Administrator
Flight distance : 318 ft

Offline

For Phantom 3 Standard, it's upgraded through DJI GO APP directly rather than putting the bin file into SD card.
Could you please let us know the problem of the drone you're faced with? we'd like to help you.
2017-3-29
Use props
Wash
lvl.1
United States
Offline

that's all well and good....  until you have a failed update.   once that's the case, one (mainly the non-engineer type that bought it) is stuck with a 'screaming bloody murder drone' that can't be updated..  BTW:  really wish the noise level for this panic mode wasn't "someone is killing me" .. I get that DJI wants to alarm of a changing condition  but holly crap this is loud and obnoxious!!!  

I was flying the drone and as the battery was about 50%.   my phone showed an update and I guess I clicked on it.  the update started and it failed for some reason. now I have this louder than my fire alarm annoying object in my place.    I used the SD card because all documentation leads to all Phantoms to be updated via the SD card.  {:4_154:} . Folks talk about looking and finding the .bin in the website....   well, not really !!!    IMHO, if you are going to force the update on the APP, then you need to find a way to connect to the drone in panic mode and force and reset, update or downgrade instead of leaving us hunting and hanging !!!   
2017-3-29
Use props
Wash
lvl.1
United States
Offline

Wash Posted at 2017-3-29 09:50
that's all well and good....  until you have a failed update.   once that's the case, one (mainly the non-engineer type that bought it) is stuck with a 'screaming bloody murder drone' that can't be updated..  BTW:  really wish the noise level for this panic mode wasn't "someone is killing me" .. I get that DJI wants to alarm of a changing condition  but holly crap this is loud and obnoxious!!!  

I was flying the drone and as the battery was about 50%.   my phone showed an update and I guess I clicked on it.  the update started and it failed for some reason. now I have this louder than my fire alarm annoying object in my place.    I used the SD card because all documentation leads to all Phantoms to be updated via the SD card.   . Folks talk about looking and finding the .bin in the website....   well, not really !!!    IMHO, if you are going to force the update on the APP, then you need to find a way to connect to the drone in panic mode and force and reset, update or downgrade instead of leaving us hunting and hanging !!!

i tried the SD car and (wait for it...  surprise, surprise ...  {:4_173:} ) the update failed again....    I uploaded the report .. so hopefully and not before the end of times, someone will reach out to me in my mail box...
2017-3-29
Use props
DJI Natalia
Administrator
Flight distance : 318 ft

Offline

Wash Posted at 2017-3-29 10:01
i tried the SD car and (wait for it...  surprise, surprise ...   ) the update failed again....    I uploaded the report .. so hopefully and not before the end of times, someone will reach out to me in my mail box...

Sorry about that, could you please export the upgrading log so we can get the details as the following instructions:
1. Enable Viewing hidden files in your OS. Below are the websites where you can check how to show the hidden files in your PC.
For The Windows System: http://windows.microsoft.com/en- ... den-files=windows-7
For The Mac System: http://ianlunn.co.uk/articles/qu ... mac-os-x-mavericks/
2.Enter the root directory of the SD card, then find the hidden folder MISC and enter it. There is LOG folder in it.
3.The LOG txt file is under the LOG folder.
2017-3-30
Use props
Wash
lvl.1
United States
Offline

[00114116]========== 2016.11.24 20:39:55. boot(1) ============
[00114245]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x84ba3db0].
[00114280]Packet upgrade start...

[00114316]Packet checking...
[00114359]Packet vlink 01.07.0090 <-> 01.06.0080.
[00114427]Done.

[00114463]Version checking[1]...
[00114498][01 00][00] v1.14.4920 -> v1.14.4920
[00114543][01 01][00] v1.14.4920 -> v1.14.4920
[00114583][04 00][00] v1.44.0.0 -> v1.51.0.0 need upgrade.
[00114665][03 05][00] v34.2.0.9 -> v34.2.0.9
[00114751][03 06][00] v2.4.15.5 -> v2.4.15.5
[00114801][09 00][00] v0.1.0.9 -> v0.1.1.0 need upgrade.
[00114903][12 00][00] v5.9.0.0 -> v5.9.0.0
[00115012][12 01][00] v5.9.0.0 -> v5.9.0.0
[00115107][12 02][00] v5.9.0.0 -> v5.9.0.0
[00115207][12 03][00] v5.9.0.0 -> v5.9.0.0
[00115325][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.
[00115463][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.
[00115497][11 01][00] v1.7.0.0 -> v2.0.0.33
[00115544]Done.

[00117578]Waiting for user confirm...
[00127611]Timeout, start upgrade automatically.

[00127677]Firmware upgrading[1]...
[00127727][11 00] Firmware upgrade start...
[00176313][11 00] Firmware upgrade finished successfully.
[00176368][09 00] Firmware upgrade start...
[00202384][09 00] Firmware upgrade finish without reboot.
[00232419][09 00] Firmware upgrade finished successfully.
[00232491][04 00] Firmware upgrade start...
[00291637][04 00] Firmware upgrade finished successfully.
[00291677]Done.

[00291709]Version checking[2]...
[00291745][01 00][00] v1.14.4920 -> v1.14.4920
[00291784][01 01][00] v1.14.4920 -> v1.14.4920
[00291831][04 00][05] v1.51.0.0 -> v1.51.0.0
[00291900][03 05][00] v34.2.0.9 -> v34.2.0.9
[00292025][03 06][00] v2.4.15.5 -> v2.4.15.5
[00292084][09 00][05] v0.1.1.0 -> v0.1.1.0
[00292169][12 00][00] v5.9.0.0 -> v5.9.0.0
[00292263][12 01][00] v5.9.0.0 -> v5.9.0.0
[00292351][12 02][00] v5.9.0.0 -> v5.9.0.0
[00292445][12 03][00] v5.9.0.0 -> v5.9.0.0
[00292543][11 00][05] v1.8.0.0 -> v1.8.0.0
[00292767][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00292802][11 01][00] v1.8.0.0 -> v2.0.0.33
[00292844]Packet upgrade finish successfully.



[01144129]========== 2017.03.25 12:37:24. boot(15) ============
[01144170]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x84ba3db0].
[01144204]Packet upgrade start...

[01144241]Packet checking...
[01144278]Packet vlink 01.08.0100 <-> 01.07.0090.
[01144310]Record vlink 01.07.0090 <-> 01.06.0080 (flow = 0).
[01144344]Done.

[01144379]Version checking[1]...
[01144412][01 00][00] v1.14.4920 -> v1.14.4920
[01144446][01 01][00] v1.14.4920 -> v1.14.4920
[01144486][04 00][00] v1.51.0.0 -> v1.51.0.0
[01144571][03 05][00] v34.2.0.9 -> v34.2.0.9
[01144650][03 06][00] v2.4.15.5 -> v2.4.20.28 need upgrade.
[01144704][09 00][00] v0.1.1.0 -> v0.1.1.0
[01144797][12 00][00] v5.9.0.0 -> v5.9.0.0
[01144914][12 01][00] v5.9.0.0 -> v5.9.0.0
[01144991][12 02][00] v5.9.0.0 -> v5.9.0.0
[01145096][12 03][00] v5.9.0.0 -> v5.9.0.0
[01145219][11 00][00] v1.8.0.0 -> v1.8.0.0
[01145345][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[01145381][11 01][00] v1.8.0.0 -> v2.0.0.33
[01145417]Done.

[01147456]Waiting for user confirm...
[01157491]Timeout, start upgrade automatically.

[01157558]Firmware upgrading[1]...
[01157817][03 06] Firmware upgrade start...
[01193908][03 06] Firmware upgrade finish failed (step = 3, err = 0xaa).
[01223942]Done.

[01223986]Version checking[2]...
[01224020][01 00][00] v1.14.4920 -> v1.14.4920
[01224055][01 01][00] v1.14.4920 -> v1.14.4920
[01224097][04 00][00] v1.51.0.0 -> v1.51.0.0
[01236637][03 05][00] device not detected.
[01249171][03 06][06] device not detected.
[01249221][09 00][00] v0.1.1.0 -> v0.1.1.0
[01261756][12 00][00] device not detected.
[01274293][12 01][00] device not detected.
[01286827][12 02][00] device not detected.
[01299370][12 03][00] device not detected.
[01311906][11 00][00] device not detected.
[01324540][11 01][00] device not detected.
[01324579]Packet upgrade failed at version checking.



[00014628]========== remo-con disconnect. boot(15) ============
[00014665]Packet [C:\P3C_FW_V01.07.0082.bin] detected, card sn [0x240041f0].
[00014703]Packet upgrade start...

[00014749]Packet checking...
[00014789]Packet vlink 01.07.0082 <-> 01.06.0080.
[00014828]Record vlink 01.07.0090 <-> 01.06.0080 (flow = 6).
[00014865]Packet upgrade failed at packet checking.



[00014438]========== remo-con disconnect. boot(15) ============
[00014473]Packet [C:\P3C_FW_V01.07.0082.bin] detected, card sn [0x240041f0].
[00014510]Packet upgrade start...

[00014550]Packet checking...
[00014593]Packet vlink 01.07.0082 <-> 01.06.0080.
[00014630]Record vlink 01.07.0090 <-> 01.06.0080 (flow = 6).
[00014668]Packet upgrade failed at packet checking.



[00014635]========== remo-con disconnect. boot(15) ============
[00014673]Packet [C:\P3C_FW_V01.08.0100.bin] detected, card sn [0x240041f0].
[00014708]Packet upgrade start...

[00014748]Packet checking...
[00014789]Packet vlink 01.08.0100 <-> 01.07.0090.
[00014831]Record vlink 01.07.0090 <-> 01.06.0080 (flow = 0).
[00014869]Done.

[00014907]Version checking[1]...
[00014957][04 00][00] v1.51.0.0 -> v1.51.0.0
[00027497][11 00][00] device not detected.
[00040039][11 01][00] device not detected.
[00040081][01 00][00] v1.14.4920 -> v1.14.4920
[00040118][01 01][00] v1.14.4920 -> v1.14.4920
[00040188][03 05][00] v34.2.0.9 -> v34.2.0.9
[00040265][03 06][00] v0.0.0.0 -> v2.4.20.28 need upgrade.
[00040321][07 00][00] v1.0.9.62 -> v1.0.9.62
[00040377][09 00][00] v0.1.1.0 -> v0.1.1.0
[00052914][12 00][00] device not detected.
[00065452][12 01][00] device not detected.
[00077988][12 02][00] device not detected.
[00090523][12 03][00] device not detected.
[00090560]Done.

[00092596]Waiting for user confirm...
[00102636]Timeout, start upgrade automatically.

[00102715]Firmware upgrading[1]...
[00102835][03 06] Firmware checksum failed.
[00102873]Packet upgrade failed at firmware upgrade.



[00014948]========== 2017.03.28 19:37:21. boot(15) ============
[00014996]Packet [C:\P3C_FW_V01.09.0080.bin] detected, card sn [0x240041f0].
[00015044]Packet upgrade start...

[00015091]Packet checking...
[00015143]Packet vlink 01.09.0080 <-> 01.09.0060.
[00015184]Done.

[00015226]Version checking[1]...
[00015275][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00027818][11 00][00] device not detected.
[00040367][11 01][00] device not detected.
[00040408][01 00][00] v1.14.4920 -> v1.14.4920 need upgrade
[00040454][01 01][00] v1.14.4920 -> v1.14.4920 need upgrade
[00040522][03 05][00] v34.2.0.9 -> v34.2.0.9 need upgrade.
[00040584][03 06][00] v0.0.0.0 -> v2.4.20.28 need upgrade.
[00040648][07 00][00] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00040704][09 00][00] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00053243][12 00][00] device not detected.
[00065781][12 01][00] device not detected.
[00078324][12 02][00] device not detected.
[00090863][12 03][00] device not detected.
[00090901]Done.

[00092939]Waiting for user confirm...
[00102978]Timeout, start upgrade automatically.

[00103058]Firmware upgrading[1]...
[00114769][01 00] Firmware upgrade start...
[00014148][01 00] Firmware upgrade finished successfully.
[00014192]Done.

[00014241]Packet [C:\P3C_FW_V01.09.0080.bin] resumed, card sn [0x240041f0].
[00014300]Packet vlink 01.09.0080 <-> 01.09.0060.
[00014353]Version checking[2]...
[00014400][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00026944][11 00][00] device not detected.
[00039494][11 01][00] device not detected.
[00039541][01 00][05] v1.14.4920 -> v1.14.4920 need upgrade
[00039584][01 01][00] v1.14.4920 -> v1.14.4920 need upgrade
[00039647][03 05][00] v34.2.0.9 -> v34.2.0.9 need upgrade.
[00039717][03 06][00] v0.0.0.0 -> v2.4.20.28 need upgrade.
[00039815][07 00][00] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00039878][09 00][00] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00052519][12 00][00] device not detected.
[00065063][12 01][00] device not detected.
[00077606][12 02][00] device not detected.
[00014971]========== remo-con disconnect. boot(15) ============
[00015017]Packet [C:\P3C_FW_V01.09.0080.bin] detected, card sn [0x240041f0].
[00015067]Packet upgrade start...

[00015125]Packet checking...
[00015176]Packet vlink 01.09.0080 <-> 01.09.0060.
[00015220]Done.

[00015265]Version checking[1]...
[00015314][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00027862][11 00][00] device not detected.
[00040405][11 01][00] device not detected.
[00040449][01 00][00] v1.14.4920 -> v1.14.4920 need upgrade
[00040490][01 01][00] v1.14.4920 -> v1.14.4920 need upgrade
[00040567][03 05][00] v34.2.0.9 -> v34.2.0.9 need upgrade.
[00040630][03 06][00] v0.0.0.0 -> v2.4.20.28 need upgrade.
[00040700][07 00][00] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00040763][09 00][00] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00053312][12 00][00] device not detected.
[00065860][12 01][00] device not detected.
[00078411][12 02][00] device not detected.
[00090964][12 03][00] device not detected.
[00091009]Done.

[00093062]Waiting for user confirm...
[00103107]Timeout, start upgrade automatically.

[00103204]Firmware upgrading[1]...
[00117203][01 00] Firmware upgrade start...
[00014141][01 00] Firmware upgrade finished successfully.
[00014184]Done.

[00014227]Packet [C:\P3C_FW_V01.09.0080.bin] resumed, card sn [0x240041f0].
[00014290]Packet vlink 01.09.0080 <-> 01.09.0060.
[00014336]Version checking[2]...
[00014384][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00026926][11 00][00] device not detected.
[00039472][11 01][00] device not detected.
[00039516][01 00][05] v1.14.4920 -> v1.14.4920 need upgrade
[00039560][01 01][00] v1.14.4920 -> v1.14.4920 need upgrade
[00039630][03 05][00] v34.2.0.9 -> v34.2.0.9 need upgrade.
[00039700][03 06][00] v0.0.0.0 -> v2.4.20.28 need upgrade.
[00039791][07 00][00] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00039924][09 00][00] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00052467][12 00][00] device not detected.
[00065008][12 01][00] device not detected.
[00077550][12 02][00] device not detected.
[00090091][12 03][00] device not detected.
[00090135]Done.

[00090175]Firmware upgrading[2]...
[00092009][01 01] Firmware upgrade start...
[00123257][01 01] Firmware upgrade finished successfully.
[00128410][07 00] Firmware upgrade start...
[00225685][07 00] Firmware upgrade finished successfully.
[00225740][03 05] Firmware upgrade start...
[00301772][03 05] Firmware upgrade finished successfully.
[00302263][03 06] Firmware upgrade start...
[00693649][03 06] Firmware upgrade finished successfully.
[00693704][09 00] Firmware upgrade start...
[00719437][09 00] Firmware upgrade finish without reboot.
[00749475][09 00] Firmware upgrade finished successfully.
[00749540][04 00] Firmware upgrade start...
[00807388][04 00] Firmware upgrade finished successfully.
[00807427]Done.

[00807466]Version checking[3]...
[00807510][04 00][05] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00820051][11 00][00] device not detected.
[00832589][11 01][00] device not detected.
[00832627][01 00][05] v1.14.4920 -> v1.14.4920 need upgrade
[00832666][01 01][05] v1.14.4920 -> v1.14.4920 need upgrade
[00845203][03 05][05] device not detected.
[00857742][03 06][05] device not detected.
[00857804][07 00][05] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00857860][09 00][05] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00870398][12 00][00] device not detected.
[00882937][12 01][00] device not detected.
[00895476][12 02][00] device not detected.
[00908014][12 03][00] device not detected.
[00908052]Packet upgrade failed at version checking.



[00014348]========== 2017.03.29 18:12:32. boot(15) ============
[00014386]Packet [C:\P3C_FW_V01.09.0080.bin] detected, card sn [0x240041f0].
[00014428]Packet upgrade start...

[00014477]Packet checking...
[00014527]Packet vlink 01.09.0080 <-> 01.09.0060.
[00014657]Done.

[00014697]Version checking[1]...
[00014747][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00027285][11 00][00] device not detected.
[00039823][11 01][00] device not detected.
[00039861][01 00][00] v1.14.4920 -> v1.14.4920 need upgrade
[00039899][01 01][00] v1.14.4920 -> v1.14.4920 need upgrade
[00052439][03 05][00] device not detected.
[00064977][03 06][00] device not detected.
[00065045][07 00][00] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00065100][09 00][00] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00077641][12 00][00] device not detected.
[00090179][12 01][00] device not detected.
[00102717][12 02][00] device not detected.
[00115256][12 03][00] device not detected.
[00115294]Done.

[00117334]Waiting for user confirm...
[00127372]Timeout, start upgrade automatically.

[00127452]Firmware upgrading[1]...
[00139068][01 00] Firmware upgrade start...
[00013952][01 00] Firmware upgrade finished successfully.
[00013997]Done.

[00014046]Packet [C:\P3C_FW_V01.09.0080.bin] resumed, card sn [0x240041f0].
[00014107]Packet vlink 01.09.0080 <-> 01.09.0060.
[00014154]Version checking[2]...
[00014204][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00026749][11 00][00] device not detected.
[00039294][11 01][00] device not detected.
[00039341][01 00][05] v1.14.4920 -> v1.14.4920 need upgrade
[00039385][01 01][00] v1.14.4920 -> v1.14.4920 need upgrade
[00051929][03 05][00] device not detected.
[00064477][03 06][00] device not detected.
[00064549][07 00][00] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00064605][09 00][00] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00077150][12 00][00] device not detected.
[00089694][12 01][00] device not detected.
[00102238][12 02][00] device not detected.
[00114783][12 03][00] device not detected.
[00114828]Done.

[00114872]Firmware upgrading[2]...
[00117007][01 01] Firmware upgrade start...
[00148709][01 01] Firmware upgrade finished successfully.
[00155560][07 00] Firmware upgrade start...
[00249149][07 00] Firmware upgrade finished successfully.
[00249205][09 00] Firmware upgrade start...
[00274699][09 00] Firmware upgrade finish without reboot.
[00304740][09 00] Firmware upgrade finished successfully.
[00304806][04 00] Firmware upgrade start...
[00361227][04 00] Firmware upgrade finished successfully.
[00361267]Done.

[00361307]Version checking[3]...
[00361361][04 00][05] v1.51.0.0 -> v1.51.0.0 need upgrade.
[00373900][11 00][00] device not detected.
[00386443][11 01][00] device not detected.
[00386483][01 00][05] v1.14.4920 -> v1.14.4920 need upgrade
[00386524][01 01][05] v1.14.4920 -> v1.14.4920 need upgrade
[00399068][03 05][00] device not detected.
[00411608][03 06][00] device not detected.
[00411694][07 00][05] v1.0.9.62 -> v1.0.9.62 need upgrade.
[00411750][09 00][05] v0.1.1.0 -> v0.1.1.0 need upgrade.
[00424291][12 00][00] device not detected.
[00436830][12 01][00] device not detected.
[00449370][12 02][00] device not detected.
[00461911][12 03][00] device not detected.
[00461954]Packet upgrade failed at version checking.



[00014333]========== remo-con disconnect. boot(15) ============
[00014378]Packet [C:\P3C_FW_V01.09.0080.bin] detected, card sn [0x240041f0].
[00014424]Packet upgrade start...

[00014474]Packet checking...
[00014534]Packet vlink 01.09.0080 <-> 01.09.0060.
[00014577]Done.

[00014621]Version checking[1]...
[00014675][04 00][00] v1.51.0.0 -> v1.51.0.0 need upgrade.
2017-3-30
Use props
RicardoGray
Captain
Flight distance : 4356421 ft
United States
Offline

Wash Posted at 2017-3-29 10:01
i tried the SD car and (wait for it...  surprise, surprise ...   ) the update failed again....    I uploaded the report .. so hopefully and not before the end of times, someone will reach out to me in my mail box...


Sounds like your frustration level is about maxed out! I do understand. Try this site for reliable downloads. The firmware is listed at the bottom of the page. This link is for the Standard, but they have files for all phantoms and this is a good site. I know what you are talking about with the loud noise too. I was working on a friends standard that needed upgrading and ran into the problem also. I was installing the latest  version 1.08.10 with the sd-card and it seemed to go ok, until I rebooted everything and had the load beep that wouldn't shut up. Did some digging and found that if you leave it on (have fully charged battery) it will finally upgrade. I took mine and put it in my basement, threw a couple pillows over it and after a bout 30-minutes of screaming, it just went quiet. I was surprised that on the last check, I took off the pillows and heard the familiar D-DD. Couldn't believe it. I re-booted everything and all was great! Success all the way around and it flies fine and the app shows current version for both RC and phantom. All I guess I can say to maybe try it one more time with this latest firmware, and if you het the loud beeping ignore it to see if it will install. I feel your pain, but patience might be your best friend on this one. Just trying to help. Good luck.
http://www.phantomhelp.com/Phantom-3-Standard/
2017-3-30
Use props
DJI Natalia
Administrator
Flight distance : 318 ft

Offline

Wash Posted at 2017-3-30 07:22
[00114116]========== 2016.11.24 20:39:55. boot(1) ============
[00114245]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x84ba3db0].
[00114280]Packet upgrade start...

If it fails to be upgraded after you try all the methods mentioned, the drone needs to be sent in for evaluation.
Sorry for the trouble.
2017-3-31
Use props
G_Sig
Captain
Flight distance : 9109311 ft
Iceland
Offline

Wash Posted at 2017-3-30 07:22
[00114116]========== 2016.11.24 20:39:55. boot(1) ============
[00114245]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x84ba3db0].
[00114280]Packet upgrade start...

On mars 25 it start updating FW 1.08.0010. Which should be right.
On mars 27 it start the same process with FW 1.09.0080???
If that is what you put on the card it should not update.
2017-3-31
Use props
Lockjr
New

United States
Offline

G_Sig Posted at 2017-3-28 14:34
This site also. Just remember to put it on formatted card.Phantom 3 Standard

Really
This is just a reply to get points to post what I really need.
2017-3-31
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules