Please select Into the mobile phone version | Continue to access the computer ver.
DJI GO 4 - Expo Settings not adopted
788 5 2017-4-2
Uploading and Loding Picture ...(0/1)
o(^-^)o
Eric13
Captain
Flight distance : 13430925 ft
  • >>>
Germany
Offline

I cannot adjust the Expo settings, they always default back to 0,40.
Would anyone have an idea why that is so?
Thank you!




Screenshot.png
2017-4-2
Use props
CanonMax
Captain
Flight distance : 8953215 ft
  • >>>
Netherlands
Offline

I think (but I do not know which tablet you are using, nor do I know firmware versions etc.) that this happens, because you might have clicked the X in the upper RIGHT instead of the < in the upper LEFT.... You need to go BACK and not QUIT this requester...

Regards, Max
2017-4-2
Use props
Eric13
Captain
Flight distance : 13430925 ft
  • >>>
Germany
Offline

Thanks,
I have latest firmware/software, working with a K1 on Android Marshmallow.
I used the 'back' button, didn't close the window.

The fact that the number shows in RED already means this setting is not being accepted.
2017-4-2
Use props
Labroides
Captain
Flight distance : 9991457 ft
  • >>>
Australia
Offline

Eric13 Posted at 2017-4-2 05:06
Thanks,
I have latest firmware/software, working with a K1 on Android Marshmallow.
I used the 'back' button, didn't close the window.

Do you have the Phantom connected?
All settings that have to be stored in the drone require the Phantom to be connected if you want them to take.
2017-4-2
Use props
Eric13
Captain
Flight distance : 13430925 ft
  • >>>
Germany
Offline

Yes - P4P connected/switched on...
2017-4-2
Use props
CanonMax
Captain
Flight distance : 8953215 ft
  • >>>
Netherlands
Offline

Eric13 Posted at 2017-4-2 05:06
Thanks,
I have latest firmware/software, working with a K1 on Android Marshmallow.
I used the 'back' button, didn't close the window.

Well done then, but a pity... I do not have this problem. My equipment/firmware/apps etc. as per: 2017-04-04:

DJI Phantom 4 Pro Model WM331A - Serial: 0AXDDCC - 0A20814 (08 January 2017) flying in MODE 2
Aircraft Firmware: V 01.03.0418 (07 March 2017)
Phantom 4 Pro Remote Controller (GL300F) Firmware: V 1.4.0.0 (07 March 2017)
DJI GO 4 App iOS: V 4.0.6 (16 March 2017)
DJI GS Pro App: V 1.2.1 (28 March 2017)

Apple iPad Pro 9.7" 128GB iOS 10.3.1 (04 April 2017)

Litchi App: V 1.15.7 (14 March 2017) - not usable at the moment
Litchi Magic Leash App: V. 1.0.3 (14 April 2016)
Litchi Vue App: v 1.0.1 (15 October 2016)

Hover App: V 2.3.0 (13 March 2017)
Airmap for Drones App: V 1.3.2 (16 March 2017)
GPS Plan App: V 2.5.1 (30 August 2016)
H.D. Sync App (Healthy Drones.com/AirData UAV): V 1.1.0 (23 March 2017)   





2017-4-4
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules