Will it work to do a full systems check before screwing all the screws together on the phantom 4 after doing a full shellchange, checking that all things work in the dji go app or will i just get errors if i dont screw all the screws together anyone????

Any one knows anything about this??

Seriously noone knows??

You can likely try and find out for yourself before anyone on the forums does. If you do find out, can you post back so others will learn from your experience?

theGrindLab.com Posted at 2017-4-21 05:47
You can likely try and find out for yourself before anyone on the forums does. If you do find out, can you post back so others will learn from your experience?

I was at a drone shop on weekend & a techy was working on a P3, top of shell off & he was testing all the birds systems, he mentioned he could check almost all the various settings, except motor start, if that helps.
Do, let us know how it goes

fans987d278a Posted at 2017-4-21 06:24
I was at a drone shop on weekend & a techy was working on a P3, top of shell off & he was testing all the birds systems, he mentioned he could check almost all the various settings, except motor start, if that helps.
Do, let us know how it goes

That helped alot thanks guys and thank you the last guy who wrote i think i figured it out, testing the systems for faults wont work with the motors not completely screwed in..

fansbbb5e2c6 Posted at 2017-4-21 07:10
That helped alot thanks guys and thank you the last guy who wrote i think i figured it out, testing the systems for faults wont work with the motors not completely screwed in..

Ah. I didn't realize you meant ALL screws including motors. That makes sense.