Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal Disconnected
990 3 2017-4-23
Uploading and Loding Picture ...(0/1)
o(^-^)o
ThePeachPuma
New
United States
Offline

I set up my Mavic and began to take off and everything was fine, but when it reached about 15 feet the camera stopped working suddenly so I landed it and tried to figure out the problem but I could not. The gimbal status says "Gimbal Disconnected" and I also have an error that says "Air Encoder Error (0x800000)"

Has anyone ever had any experience with this before?





2017-4-23
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

Hi ThePeachPuma, what's your current firmware version? Is the firmware up to date?
Please try to do the gimbal calibration then test the gimbal again.
2017-4-23
Use props
fans6da5d1db
New
United States
Offline

I'm having the samw issue....but not receiving an error, that I'm aware of.  Cannot get it reconnected.  I'm new to the drone world.  Have only had it 2 weeks, flown it twice.  Had this issue both flights.  Tried switching batteries.  Shut down, reconnect remote...nothing seems to help.  Firmware is uptodate as of last week.
2017-4-28
Use props
Guy driver
lvl.1
Flight distance : 495030 ft
United States
Offline

Can’t do a calibration if discounted.  I reinstalled DJI GO4 and it connected.  
2018-4-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules