Please select Into the mobile phone version | Continue to access the computer ver.
S1000+ One Motor fails
847 1 2017-4-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
Mario A.
lvl.1
Flight distance : 930161 ft
Germany
Offline

Hi!

I just made about 10 Flights with my new S1000+, A3 Pro, LB2-Setup. Everything was fine.
Today i made a short testflight, when suddely i heard a sound like when the A3 is switching to another gps module etc. Everything was wobbling and i landed. Props were all turning. Now M4 is inoperative. I tested everything - ESC seems to be ok, flashes green when booting like all others. After checking the ESCs in the DJI Assistent M4 is not working, then it´s working...

What can i do to search for the fault?


2017-4-28
Use props
PeterFDJI3
lvl.1
United States
Offline

Suggest a further tests:   Unplug and re-plug the M4 cable into the PMU.  I had this problem with my landing gear and it just needed to be re-plugged in.      
Also try this bench test, using the Assistant software:  Plug that troublesome M4 cable into a different M slot and see if the same working/not-working happens.  If it does not show proper response in the new slot, then you have at least isolated it to that particular cable/arm/ESC/Motor
2017-5-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules