Please select Into the mobile phone version | Continue to access the computer ver.
Minor video vibration - Help
Uploading and Loding Picture ...(0/1)
o(^-^)o
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

I am having some minor video vibration, shooting at 4K 25FPS Shutter Speed 50.
New props, new gimbal Vibration Dampers, still same issue.
Also tried many IMU and Gimbal calibration. Any more tips?
Maybe a motor is causing this? Please check...

Original video with minor vibration:
https://mega.nz/#!PFoG2BLT!fv_CW ... fT1dJb5PLiaI8CEyHfc

Video with no vibration after Warp Stabilizer (Adobe Primiere)
https://mega.nz/#!OFRWGZ7b!IPco9 ... 8gFfTAOxdjV5UTMKKX4

2017-5-9
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Do you see any difference at a lower resolution?
2017-5-9
Use props
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

DJI-Jamie Posted at 2017-5-9 14:13
Do you see any difference at a lower resolution?

Haven't test it yet, why? SDCARD issue?
2017-5-9
Use props
Geebax
Captain
Australia
Offline

Flying Visions Posted at 2017-5-9 16:49
Haven't test it yet, why? SDCARD issue?

If you want us to see it easily, please post it to Youtube or Vimeo. And no, vibration has nothing to do with the SD card, more likely it is an unbalanced prop. Hover the aircraft right in front of yourself and look to see if the camera is vibrating.
2017-5-9
Use props
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

Geebax Posted at 2017-5-9 17:02
If you want us to see it easily, please post it to Youtube or Vimeo. And no, vibration has nothing to do with the SD card, more likely it is an unbalanced prop. Hover the aircraft right in front of yourself and look to see if the camera is vibrating.

I´ve posted the download links with full 4k quality. Please check.
Also I´ve tested more than 12 props...
The Drone stays stable at hover, this only happens when moving
2017-5-9
Use props
Geebax
Captain
Australia
Offline

Flying Visions Posted at 2017-5-9 17:09
I´ve posted the download links with full 4k quality. Please check.
Also I´ve tested more than 12 props...
The Drone stays stable at hover, this only happens when moving

The reason I suggested posting them on Youtube, is that vibration issues can be viewed that way, whereas quality issues are best done via a download. But remember not everyone has unlimited download, I don't and much of the world does not either. So I don't use up my allowance unless I have to.
2017-5-9
Use props
Phantomski
Captain
Flight distance : 14869882 ft
United States
Offline

how many plastic pins in the gimbal mount?
Did you try new props?
Did you hover low, and looked well for vibrations and overall behavior of the drone in a hover?
No crashes or other mishaps of any sort?
Did you change any gain or other settings in the app?
What happens if you hold your drone in your hand and record while "pretending to fly"?
And yes, check other resolutions too.....
2017-5-10
Use props
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

Phantomski Posted at 2017-5-10 08:12
how many plastic pins in the gimbal mount?
Did you try new props?
Did you hover low, and looked well for vibrations and overall behavior of the drone in a hover?

2 plastic pins (original ones)
I have tried more than 6 pairs of props
If I hover low I dont notice any vibration, not even in the footage
Gains are all default
If I hold in my hand all stays ok

I will check other resolutions
2017-5-11
Use props
Phantomski
Captain
Flight distance : 14869882 ft
United States
Offline

keep us posted.. hope u get it figured out
2017-5-11
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Flying Visions Posted at 2017-5-9 16:49
Haven't test it yet, why? SDCARD issue?

It could possibly be a write speed issue when using a UHD resolution, but from what I can see it's minute. Try a lower resolution to see if there's any difference.
2017-5-11
Use props
StanfordWebbie
Captain
Flight distance : 178018 ft
United States
Offline

I had a similar issue after a crash and my gimbal broke free.  I put in two new plastic pins and 4 new white rubber dampers.  Only problem was, I only inserted the white rubber dampers on the bottom plate.  I forgot to push them thru the top plate, so only the 2 pins were holding the gimbal assembly to the drone.  The small vibration (surprisingly small for my error) was noticeable right away.  As soon as I pushed the dampers through on both sides, problem fixed.   Just an outside chance you did the same thing.  ;)
2017-5-11
Use props
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

StanfordWebbie Posted at 2017-5-11 17:35
I had a similar issue after a crash and my gimbal broke free.  I put in two new plastic pins and 4 new white rubber dampers.  Only problem was, I only inserted the white rubber dampers on the bottom plate.  I forgot to push them thru the top plate, so only the 2 pins were holding the gimbal assembly to the drone.  The small vibration (surprisingly small for my error) was noticeable right away.  As soon as I pushed the dampers through on both sides, problem fixed.   Just an outside chance you did the same thing.  ;)

Thanks for the help but as I said already tried new dampers and still have the same issues.
All are correct inserted
2017-5-12
Use props
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

DJI-Jamie Posted at 2017-5-11 13:56
It could possibly be a write speed issue when using a UHD resolution, but from what I can see it's minute. Try a lower resolution to see if there's any difference.

Just tested. It happens in all resolutions.
2017-5-13
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Flying Visions Posted at 2017-5-13 06:01
Just tested. It happens in all resolutions.

Is everything up to date firmware wise?
2017-5-15
Use props
Flying Visions
Second Officer
Flight distance : 5655761 ft
Portugal
Offline

DJI-Jamie Posted at 2017-5-15 15:32
Is everything up to date firmware wise?

Yes. I think it is a P3 limitation in High Wind.
2017-5-15
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules