Hi,
I have done an update to firmware 700 and now I cannot fly indoor anymore.
Because of weak GPS signal the Mavic jumps into NFZ limit and blocking start.
GEO SYSTEM is disabled and the next NFZ is about 50 miles away from here!

I already wrote an email to DJI days ago but they don´t answer....support is crap!
@DJI: Is this a bug or a feature???

Could you please provide below information so I can report it to our engineers?
1. DJI GO version
2. Mobile device module
3. Screenshot of the error message

DJI Mindy Posted at 2017-5-16 23:02
Could you please provide below information so I can report it to our engineers?
1. DJI GO version
2. Mobile device module

Mindy, this does happen to everybody. Happens to me as well and there are many reports here. In my case:

Firm .700 (as well in the previous one)
DJI Go latest one on Android
Phone: Galaxy S7

But you have reports here from everybody. It is indeed a firmware issue, as it happens as well without the phone being connected. If you have no satellite positioning, the drone will say either ATTI or OPTI. When the satellite reception is bad (i.e. close to a window of the house) You will get the NFZ Limit on the remote, and it'll say cannot take off on the app.

i had the same problem with firmware version 600 and 700 so i reverted back to version 550,they also asked me to provide photo,s but i had already reverted back to previous version and dont want to go through the update process again,what i would suggest in the future is to have your camera ready to record any future firmware update glitches as proof,i cant believe that the amount of post,s on here regarding the NFZ issue is not being taken seriously  by dji, its like they dont believe it is happening, so if anyone still has this version of firmware on there aircraft and it is giving the NFZ warning please send in pictures or videos of the problem, so that dji can see the evidence and hopefully fix the issue in a future update.
LATEST DJI GO 4  for both iso & android
FIRMWARE 600 - 700
NVIDIA SHIELS K1
IPHONE 5S
SAMSUNG GALAXY S5

DJI Mindy Posted at 2017-5-16 23:02
Could you please provide below information so I can report it to our engineers?
1. DJI GO version
2. Mobile device module

There are many people out there having this issue, but some say they got no NFZ problem with FW 600 or 700.
But it´s a fact that no one got this issue with FW 400 to 550, it all starts with FW 600.
I flashed back to FW 400 -> no NFZ limit on weak GPS everything fine
Fashed to 700 again -> NFZ limit indoor

DJI GO4 v4.0.7
Samsung Galaxy S7edge with Android 7

Thank you. I have reported this to our engineers.
If I get any update, I will let you know.
Thank you for all the feedback.

DJI Mindy Posted at 2017-5-17 00:51
Thank you. I have reported this to our engineers.
If I get any update, I will let you know.
Thank you for all the feedback.

thank you Mindy lets hope there will be a firmware fix very soon as i would love to try fixed wing mode ;)

DJI Mindy Posted at 2017-5-17 00:51
Thank you. I have reported this to our engineers.
If I get any update, I will let you know.
Thank you for all the feedback.

Thanks Mindy!

Could you please tell them to make the GO4 App go stable on Android 7 too?
My device, and MANY MANY others also, is crashing every flight one times.
Tried everything possilble to solve that by my own incl. factory reset + GO4 app only - no chance!

If they don´t believe....
read the comments in Google Play Store, I have never seen such a continous sh** storm in an app review before.

DJI Mindy Posted at 2017-5-17 00:51
Thank you. I have reported this to our engineers.
If I get any update, I will let you know.
Thank you for all the feedback.

Same problem for me since .600 and now on .700

The moment I turn it on, NFZ, then GPS, all fine...

Nees Posted at 2017-5-17 02:45
Same problem for me since .600 and now on .700

The moment I turn it on, NFZ, then GPS, all fine...

...........

bomberuk Posted at 2017-5-17 09:38
...........

That means?

We will fix the problem in the next version

wisnia.sebastia Posted at 2017-5-22 18:56
We will fix the problem in the next version

We???
Who are you?
And....if I read the latest DJI news I guess I´m done with DJI on the next enforced(!) update and geting back my money!
Because I cannot set my AC to factory settings (V01.03.0400) right now as I wish to and if the Mavic isn´t mine (´cause of I could not decide what to do with that item)
DJI can keep that piece of plastic and my money will not be theirs!  {:4_154:}

btw...
Today I´ve had a look at „find my drone“ while that NFZ issue occurs…
Watch out for that massive GPS glitch with 7-9 (!) sats locked.

My pics are gone.....

DJI Mindy Posted at 2017-5-17 00:51
Thank you. I have reported this to our engineers.
If I get any update, I will let you know.
Thank you for all the feedback.

Hello DJI what´s going on here???

Updated to newest GO4 App v4.1.0 and NOTHING changes to this issue!

NFZ Limit Error still lingering. This sucks