DJI-Andy
lvl.1
China
Offline
|
hi, tony, this is andy from dji.
last time, just answer the method in phantom mode, for naza-m mode, it is same as naza-m v2. detail as follow:
1. Phantom mode: please see the quick start manual at page18,
http://download.dji-innovations. ... _Manual_v1.4_en.pdf
S2 is used to record a home point manually, It will work after a home point has been recorded automatically with a good gps signal. Flipping S2 from upside to down side(Notice: not middle side) and rapidly back 5 times or more, will reset the home point. In Naza-M mode, S2 is be used for IOC
2. NAZA-M mode: please see the naza-m quick start manual of IOC part at page 19:
http://download.dji-innovations. ... _Guide_v1.26_en.pdf
manually update the home point for home lock:
After 6 or more GPS satellites have been found. And the aircraft can be hovering. Toggle the IOC switch from Course Lock to Home Lock, and back to Course Lock quickly 3 to 5 times
manually update the direction for course lock:
30 seconds after you power on the autopilot system. Toggle the IOC switch from Off to Course Lock, and back to Off quickly 3 to 5 times.
|
|