Manitobahunter
lvl.4
Canada
Offline
|
Went out flying this morning. Did a compass calibration in an area free of interference first. Then flew a ways away, and turn around, H is moving around controller screen edges correctly, and tilt the gimbal down and there's the big yellow H and dot on my landing pad. Take the drone out to the middle of the field, do a short 5 minute auto active shot on myself, which worked fine. Stopped the active shot and flew a distance away, same as yesterday, yellow H around the outside of my screen, but no homepoint H and dot on my pad. I took a chance and let it auto return to home and the green AR flight path thingy appeared and it came back and landed on the pad, so seems more a matter of the software not displaying the home point H and dot after using the auto active shot feature, than it not knowing where the homepoint is. After landing the drone , I turned the drone off and back on, flew a distance away, turned around and there's the circled yellow H and dot on my landing pad same as yesterday as it should be. As a side note, I flew again later in the day, same effect, after using auto active shot, the Yellow H/circle/dot had vanished off my landing pad, although I noticed the Yellow H /circle/dot briefly flash on a couple times on my landing pad just for a second and then dissapear again, while I was flying back to land. The Yellow H moving around the outside of the controller screen always functions correctly.
|
|