How to Change M600 from 2.4GHz to 5.8GHz
Home / Products / Pro Systems / Lightbridge
2319 1 2017-12-6
Uploading and Loding Picture ...(0/1)
o(^-^)o
jschreiber
lvl.1
+ Add Friend Person Message
Australia
Offline

  1#
Hey there, new M600 user here.

For various reasons, I would like to change the RC controller and video from 2.4GHz to 5.8GHz. The specs say that it supports 5.8GHz however on DJI GO app, there is only options to choose 2.4GHz channels (13 - 20).

Does anyone know how I can switch the RC control and video to the 5GHz band. I've looked at DJI GO app, DJI Assistant2 (both M600 and lightbridge settings) but cant seem to figure this out!

Many Thanks
Jason
Favorite Like
2017-12-6
Use props
DJI Mindy
Administrator
+ Add Friend Person Message
Offline

  2#
Hi, Jason, this is correct, only Master and Slave RC connect to each other via 5.8GHz channel. You cannot select 5.8GHz in image transmission.
2017-12-8
Use props
Advanced
Bold Text Color
Upload
Picture Add Link Emoticon
You need to log in before you can reply Login | Register now

Credit Rules