When I go to change my wifi settings on my Mavic Air I do not have have any options past 10. On custom nothing changes, still only shows 1-10. Nothing happens when I scroll in either direction. Any ideas? Thanks.  

Are u using IPhone ??

Kevjones1959 Posted at 2018-4-30 10:29
Are u using IPhone ??

Yes, I've tried my iPhone as well as my iPad.

Change the channel mode to 5.8

There's a bug in the current iOS DJIgo app that limits the channels.  There are a number of posts about it here and they are hopefully releasing a fix soon.

In the meantime if you have or can borrow and android device for 5 minutes, connecting that to the aircraft will change the region to the proper region, and you can then disconnect and use your iphone after that.

Jeff7577 Posted at 2018-4-30 10:47
Change the channel mode to 5.8

I'm not able to change the channel. I don't see an 100+ channels.

JEZ2 Posted at 2018-4-30 11:13
There's a bug in the current iOS DJIgo app that limits the channels.  There are a number of posts about it here and they are hopefully releasing a fix soon.

In the meantime if you have or can borrow and android device for 5 minutes, connecting that to the aircraft will change the region to the proper region, and you can then disconnect and use your iphone after that.

I see. Guess I'll hang tight until they release an update. Thanks for the info.

Betude Posted at 2018-4-30 11:15
I see. Guess I'll hang tight until they release an update. Thanks for the info.

Rumor has it fix will be out "early May", so should be soon.  Be aware that you'll probably have reduced distance until then, so if you'll be flying a lot in the next week or so, you still may want to get a hold of and android device.

JEZ2 Posted at 2018-4-30 11:56
Rumor has it fix will be out "early May", so should be soon.  Be aware that you'll probably have reduced distance until then, so if you'll be flying a lot in the next week or so, you still may want to get a hold of and android device.

Sounds good, thanks for the info JEZ2.

Betude Posted at 2018-4-30 11:57
Sounds good, thanks for the info JEZ2.

You can also fix this with downgrade the app until the new upgrade is out.

JEZ2 Posted at 2018-4-30 11:13
There's a bug in the current iOS DJIgo app that limits the channels.  There are a number of posts about it here and they are hopefully releasing a fix soon.

In the meantime if you have or can borrow and android device for 5 minutes, connecting that to the aircraft will change the region to the proper region, and you can then disconnect and use your iphone after that.

Thank you for your post. I am happy to read that this -mysterious- problem has eventually been localised (I didn't have it thanks to Android). Many others have had trouble though...

Betude Posted at 2018-4-30 10:30
Yes, I've tried my iPhone as well as my iPad.

Please provide a screenshot of the firmware info. I would help your forward this situation, thanks for your support.

When you switch to auto, the channels are there? If you go to 5.8ghz you can move to all the channels? Or is it locked no matter what you do?

For Android you can move left/right like if you move though your phone screens.

EDIT: I see it's a bug in Iphone.

It works fine for me on iPhone. You must use your finger to scroll through the channels at the very bottom.

Your screenshot doesn’t show the part where you select the channel so it’s down more

This is what it looks like on my iPhone.