Calibrate gimbal freeze at 60%
3987 11 2021-7-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
PCTecniC
lvl.2
Flight distance : 1962215 ft
Portugal
Offline

My drone was flyng, no problem, and the gimbal was no problem.
i try make a calibration on the gimbal like a i make reguraly.
It stil freeze at 60%, i try several times and the same.
Now i cant fly, ask to calibrate the gimbal and i cant do it.
I have the last firmware on dji fpv drone.
Anyone have a solution for that?
2021-7-28
Use props
DJI Paladin
Administrator
Flight distance : 318 ft

Offline

Hi there. Thank you for reaching out and we're sorry for the trouble. Can you please confirm if the unit experiences a hard landing before? Also, kindly please try to update/refresh the firmware of the unit using the DJI Assistant 2 software to see if the issue persists. Please keep us posted. Thank you!
2021-7-29
Use props
PCTecniC
lvl.2
Flight distance : 1962215 ft
Portugal
Offline

Hello, i have refresh the firmware, and the calibration problem persist, the gimbal appears to be ok, go up and down.
I dont know if a small crash may cause this gimbal malfunction, i have installed the gimbal protecion, that protect the gimbal toutch the floor in case of crash.
Today i have a gimbal to test, and it do the calibration well. i have to buy a new one. Very disapointing
2021-7-30
Use props
Spyderstevens
lvl.1
United States
Offline

PCTecniC Posted at 2021-7-30 02:47
Hello, i have refresh the firmware, and the calibration problem persist, the gimbal appears to be ok, go up and down.
I dont know if a small crash may cause this gimbal malfunction, i have installed the gimbal protecion, that protect the gimbal toutch the floor in case of crash.
Today i have a gimbal to test, and it do the calibration well. i have to buy a new one. Very disapointing

Yeah I am not impressed with my DJI FPV.  Mine has NEVER CRASHED AT ALL, and in MINT condition, and not only do I have freaking calibration errors EVERY time I really want to fly it or some firmware update that both are required preventing me from flying it WHEN I WANT, but now I have this error message!!  I’ll never but another DJI drone.  What is wrong with the technology here?  Is it because it’s not American? What do I do to resolve this crap?
2022-4-16
Use props
djiuser_SX2cLXwLUpnQ
New
Australia
Offline

I have same problem and camera stays flopped down when on and off
2022-7-23
Use props
rsacca
lvl.1
United States
Offline

I have the exact same problem....Calibration goes to 60% and then the camera drops down and the calibration just sticks at 60%. Eventually it times out and fails.
This started after the last firmware updates. I downgraded the firmware, but the problem is still there.
Can anyone provide guidance?
2022-11-3
Use props
SeaPOD
lvl.1
United States
Offline

Don't know for sure if this is a fix for all Gimbol Calibration freeze issues but I have found that when I removed my avata camera cover....I tried many times with same freezing at 60, 70, ans even 90% freeze would happen.  With drone lens protector off...worked first time all the way to 100%.  Hope this helps.
2022-12-13
Use props
RCBOB
lvl.2
Flight distance : 1604137 ft
United States
Offline

Just got a new avata 2 and out of habit I do a gimbal calibration before I fly, I also can't get past 60%.
2024-8-9
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

RCBOB Posted at 8-9 13:43
Just got a new avata 2 and out of habit I do a gimbal calibration before I fly, I also can't get past 60%.

Hi there,
thank you for reaching out.

Before we further assist you, kindly please try to update/refresh the firmware of the unit using the DJI Assistant 2 software to see if the issue persists.

Please keep us posted. Thank you.
2024-8-11
Use props
BoMack79
New
United States
Offline

Is DJI going to get this fixed?
Everyone has the latest firmware, so at this point, continuing to ask is just making excuses.
Fix it.
2024-9-16
Use props
djiuser_5QPmOtV4xNpj
lvl.1
United States
Offline

take the filter off
2024-10-19
Use props
DJI Natalia
Administrator
Offline


Hi there, thank you for reaching out. May i confirm if you're encountering the same issue? Kindly inform us the full details of the issue that you experienced with your DJI product, and we will surely provide you with an accurate resolution after we review the details. Rest assured that we're committed to providing the best experience for our users.

Please keep us posted. Thank you for understanding.
2024-10-20
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules