Hi all..

To my opinion the minimal timelapse interval is kinda long (3 seconds).

Today I saw an instruction vid where the maker could select an interval of 2 seconds...
How is that possible?



(Around 1:36 in the video)

I think you must be on old firmware.  DJI added 2 second interval a while ago.

onymar Posted at 8-23 10:26
I think you must be on old firmware.  DJI added 2 second interval a while ago.

Ow…

I thought I had updated everything…

I’ll check, thanks!

Yesterday evening I found that the controller WiFi does not connect to my hotspot when it is the only device using it.
(It doesn’t activate the hotspot, that is an iPhone 13)

Once I connect the iPad to the hotspot, the controller also directly connected to it.
Is this normal?

Anyway, this is probably why I didn’t get update notifications anymore.

Now I picked up a fly more combo yesterday and I needed to update the batteries anyway, so…
2 batteries updated
Controller software updated
Aircraft firmware updated
Flysafe DB updated
Again batteries updated

So I updated all software to my knowledge now.
Aircraft is on version 01.00.0300 (checked and the system states it’s the latest version)
RC is on version 01.01.0300

But still an interval of 3s minimum?
That is for the “free” hyperlapse mode, for the others to check I need to be in the air.
The video shows the locked mode.

Do intervals differ over the various hyperlapse modes, perhaps?

Hi there. Thank you for reaching out. We will coordinate this with our designated team for further clarification. We will surely keep you posted once we receive an update. Thank you for your understanding and support.

Hannibal_ Posted at 8-24 01:32
[view_image]
[view_image]

Aloha Hannibal,

     Both images indicate your remote controller is in "Cine" mode yet the display in the first image indicates you are in "Normal" mode.  Now, I do not know if that means anything, but maybe you could try using the mode setting to see if the mode setting makes any change regarding the time interval setting or any other problem.

     Take care and be safe!

Aloha and Drone On!

Cetacean Posted at 8-24 02:27
Aloha Hannibal,

     Both images indicate your remote controller is in "Cine" mode yet the display in the first image indicates you are in "Normal" mode.  Now, I do not know if that means anything, but maybe you could try using the mode setting to see if the mode setting makes any change regarding the time interval setting or any other problem.

Hi,

You are right…
Had not noticed that.
Not sure if it has anything to do with the interval, though (can’t really imagine that, but my imagination failed me before on such points ).

My guess would be that it is just that I had not taken off yet after the updates…
But I will see this afternoon for I plan to empty 3 full batteries then.
Before the update everything worked fine with that switch.

I will also check the other hyperlapse modes on the interval when it is in the air.

To be continued

DJI Paladin Posted at 8-24 00:54
Hi there. Thank you for reaching out. We will coordinate this with our designated team for further clarification. We will surely keep you posted once we receive an update. Thank you for your understanding and support.

Hi,

This afternoon we flew the little champ and the 2s interval was available.
It seems like the lists need the mini too fly to be updated?

Anyway, glad to have it available now.

Regards Han

Cetacean Posted at 8-24 02:27
Aloha Hannibal,

     Both images indicate your remote controller is in "Cine" mode yet the display in the first image indicates you are in "Normal" mode.  Now, I do not know if that means anything, but maybe you could try using the mode setting to see if the mode setting makes any change regarding the time interval setting or any other problem.

As soon as it was in the air this afternoon, the cine mode also displayed correctly.

One happy pilot here

Hannibal_ Posted at 8-24 07:43
As soon as it was in the air this afternoon, the cine mode also displayed correctly.

One happy pilot here

Aloha Hannibal,

     Good to hear!  

Aloha and Drone On!

Cetacean Posted at 8-25 01:36
Aloha Hannibal,

     Good to hear!  

Thanks,

You too, man!
Fly well and often