Hello,
I bought the goggles integra with the Avata.
Now i wanted to pair the goggles to the DJI Flight Simulator, but does that even work. I couldn't do it.

Can someone inform me?

Kind regards,

Hello, there. Do you mean DJI Virtual Flight App？If so, may we know which step you stuck at?

DJI Wanda Posted at 10-6 19:50
Hello, there. Do you mean DJI Virtual Flight App？If so, may we know which step you stuck at?

Hi,
I'm stuck immediately after choosing the way I wanna play the app.
The game asks my what gear I have, I can choose between the goggles and controller, or goggles and motion controller, or just my phone.
When I click on the option goggles and controller, it starts connecting, but doesn't connect.

Does the Integra even work with the app? It doesn't shows Integra goggles in the three options.

Hope you can help me, I don't wanna fly the Avata without practicing first

Remy Sterken Posted at 10-6 22:54
Hi,
I'm stuck immediately after choosing the way I wanna play the app.
The game asks my what gear I have, I can choose between the goggles and controller, or goggles and motion controller, or just my phone.

DJI Goggles Integra supports DJI Virtual Flight APP.
Please Make sure that the virtual flight switch in the DJI Goggles Integra has been enabled (Setting path: “Settings > More > DJI Virtual Flight.”;

Notes: After the DJI Virtual FLight comes to "Connect Goggles" page and can not go through to the next step, pls then go to DJI Goggles Integra and set the goggles to virtual flight mode.

DJI Wanda Posted at 10-7 01:23
DJI Goggles Integra supports DJI Virtual Flight APP.
Please Make sure that the virtual flight switch in the DJI Goggles Integra has been enabled (Setting path: “Settings > More > DJI Virtual Flight.”;

It works!
Thanks for the help

Remy Sterken Posted at 10-9 02:20
It works!
Thanks for the help

You are most welcome.
We are glad that your issue was resolved.  

Hi,

I am having a similar problem trying to connect the Goggles Integra and Motion Controller, or the DJI RC-N2.

Should either be compatible with the DJI Virtual Flight app?

Drone-MotoTracker Posted at 6-20 01:43
Hi,

I am having a similar problem trying to connect the Goggles Integra and Motion Controller, or the DJI RC-N2.

Hi there, the Virtual Flight App（Android&iOS）is compatible with DJI Goggles Integra and DJI Motion Controller. But it does not support RC-N2.

Hi
Problem with djivirtual fly
I did connect to iphone goggles integra and then can't connect motion remote(

Сергей Евтеев Posted at 7-23 09:22
Hi
Problem with djivirtual fly
I did connect to iphone goggles integra and then can't connect motion remote(

Hi there, thank you for reaching out. May I know what version/model of iPhone are you using at the moment? Looking forward to your response. Thank you.

I am trying to use virtual flight and it keeps spinning.  In the goggles it says motion controller not compatible. It won't let me select myother djifpv controller 2. How do I get this to work? I can't even get into the settings for flight simulator in the goggles.

djiuser_Spq4lGYAB1sq Posted at 12-4 04:31
I am trying to use virtual flight and it keeps spinning.  In the goggles it says motion controller not compatible. It won't let me select myother djifpv controller 2. How do I get this to work? I can't even get into the settings for flight simulator in the goggles.

Hi, there
Thanks for your question.
Please follow the steps below to try again:
1. Ensure that the device has been activated.
2. Make sure that the DJI Goggles 2, remote controller, DJI Motion Controller firmware, and the DJI Virtual Flight app have been updated to the latest version.
3. Make sure that virtual flight switch in the DJI Goggles 2 has been enabled (Setting path: “Settings > More > DJI Virtual Flight.”;
（After the DJI Virtual FLight comes to "Connect Goggles" page and can not go through to the next step, pls then go to DJI Goggles 2 and set the goggles to virtual flight mode.）
4. Try to power on and connect the aircraft, goggles, and DJI Motion Controller and power off the aircraft. Then, connect to the app.  （The aircraft can only be DJI FPV, DJI Avata and O3 air unit）
5. Make sure that the cable used has the data transmission function (which can be tested by connecting it to DJI Fly).
6. Use the OTG cable, USB-C cable/USB-C to USB-C cable/USB-C to Lighting cable to connect the goggles and your mobile phone.
7. Check whether the OTG cable and cables provided in the combo are being used.

If you are using the Android mobile device, please check more steps below:
1. When connecting the Android device to the goggles, if options “photo transmission/file transmission/only charging” appear, select “file transmission”;
2. When the goggles are connected, check whether the DJI Fly or other apps that support AOA communication are automatically enabled.
2) If so, enter the mobile phone’s “System Settings - Apps - DJI Fly (or other apps that are launched automatically)”, and set it to “Default”. Clear the default option, and connect to the goggles. Only select “Virtual Flight” on the panel, and do not launch DJI Fly or other apps. Please try again to see if the connection is successful.
3. Check whether the OTG cable and cables provided in the combo are being used.

Please keep us updated after tyring, thanks.