Thank you for implementing waypoints on the Mini 4 Pro. This is wonderful !
May I please request the following enhancements:
1) Plan/edit waypoint mission without controller or aircraft
2) Easily transfer waypoint mission between iPad (plan/edit) and iPhone (execute)
3) Insert new waypoint anywhere, OR: re-arrange waypoints by dragging in the list
4) Accept negative waypoint and POI altitude - these locations are often lower than takeoff point

Again, I'm very pleased with Waypoints on Mini 4 Pro - but we always want a little more

Hi there. Thank you for your feedback. We appreciate the time and effort you have invested in providing this suggestion to us. Your feedback will be cascaded to the concerned team for further review. After the evaluation of the engineers, significant suggestions or requests will be implemented via the firmware update, app update, etc. Thank you for your understanding and support.

DJI Paladin Posted at 12-11 19:20
Hi there. Thank you for your feedback. We appreciate the time and effort you have invested in providing this suggestion to us. Your feedback will be cascaded to the concerned team for further review. After the evaluation of the engineers, significant suggestions or requests will be implemented via the firmware update, app update, etc. Thank you for your understanding and support.

Few other enhancements that would improve the Waypoint mission experience:
1) Provide an option to RTH when signal to the controller is lost AND the drone detects an obstacle, instead of just hovering in place.  Perhaps after tracing its way back towards the waypoint it came from until the path is clear for RTH.  A second option to make available might be to trace back and then go directly to the next waypoint.
2) When setting the POI altitude (which may be negative) on a map, display the bottom half of the camera frame that would be captured at the chosen camera orientation & heading, gimbal tilt, and zoom level.  Ideally, the top center of this half-frame would coincide with the POI location, while the sides and bottom would give a good indication of what details the full camera frame would capture, thereby facilitating further optimization of the camera settings to get us the shot we want.

djiuser_fl0AG9OqVP1T Posted at 2023-12-29 18:57
Few other enhancements that would improve the Waypoint mission experience:
1) Provide an option to RTH when signal to the controller is lost AND the drone detects an obstacle, instead of just hovering in place.  Perhaps after tracing its way back towards the waypoint it came from until the path is clear for RTH.  A second option to make available might be to trace back and then go directly to the next waypoint.
2) When setting the POI altitude (which may be negative) on a map, display the bottom half of the camera frame that would be captured at the chosen camera orientation & heading, gimbal tilt, and zoom level.  Ideally, the top center of this half-frame would coincide with the POI location, while the sides and bottom would give a good indication of what details the full camera frame would capture, thereby facilitating further optimization of the camera settings to get us the shot we want.

Hello there. We really appreciate your feedback. Rest assured that this will be forwarded to our relevant team for future consideration. Should you have other inquiries, feel free to contact us. Thank you for your valued support!