The empty piers at sunrise......


Theres only a couple of boats left in the water now.




Taken with Mini 3 Pro.


          [See My Other Content...]

It looks chilly this morning.

WN1X Posted at 2-5 03:22
It looks chilly this morning.

It was about 2c with a -1c feels like temp due to the winds.  

DAFlys Posted at 2-5 01:12
[view_image]

Imposing sunrise capture DA.    No doubt the piers will fill up once again as summer gets closer, but first we have to bring in Spring.  

DowntownRDB Posted at 2-5 03:38
Imposing sunrise capture DA.    No doubt the piers will fill up once again as summer gets closer, but first we have to bring in Spring.

It bright and very windy here at the moment so I just cut the lawn,   Im feeling all summery already.   I only went out to build a temporary log store from some pallets and then manually split some wood and I did that and then cut the grass.   

DAFlys Posted at 2-5 03:48
It bright and very windy here at the moment so I just cut the lawn,   Im feeling all summery already.   I only went out to build a temporary log store from some pallets and then manually split some wood and I did that and then cut the grass.

Nice that you were able to get outdoors, despite the cold weather.  

Magnificent Sunrise. I'm a big fen of Sunrises and Sunsets.

DowntownRDB Posted at 2-5 04:30
Nice that you were able to get outdoors, despite the cold weather.

Yes,   I have to admit to be cheered up by it.   Although we are clouding over now and getting a bit darker.  But I am ahead on tomorrow's schedule.

Dronep Posted at 2-5 05:15
Magnificent Sunrise. I'm a big fen of Sunrises and Sunsets.

thanks,   I try to get out most mornings for sunrise.   

Lovely shot.

Depp Posted at 2-5 06:02
Lovely shot.

many thanks Depp.  

DAFlys Posted at 2-5 01:12
[view_image]

A promising glow to the sky

Blériot53 Posted at 2-5 23:40
A promising glow to the sky

thanks Mr B.  Were due rain now for the next few days but the forecast seems to make it look like it will be only over night which I am super hoping is true.  

DAFlys Posted at 2-6 00:19
thanks Mr B.  Were due rain now for the next few days but the forecast seems to make it look like it will be only over night which I am super hoping is true.

Our forecast is for overnight snow Wed/Thu - but I think rain is more likely.

Blériot53 Posted at 2-6 00:23
Our forecast is for overnight snow Wed/Thu - but I think rain is more likely.

We can but hope for you.    Ive got to pickup the car later and then go and see a friend for coffee as its his birthday this week.   Then I have some maintenance to do on the 3d printer as last night I noticed it was making some strange sounds and `I tracked down the belt pulls are loose.    I'll have to get a ladder out for that as it's nearly 8 ft tall.  

DAFlys Posted at 2-6 00:26
We can but hope for you.    Ive got to pickup the car later and then go and see a friend for coffee as its his birthday this week.   Then I have some maintenance to do on the 3d printer as last night I noticed it was making some strange sounds and `I tracked down the belt pulls are loose.    I'll have to get a ladder out for that as it's nearly 8 ft tall.

Crikey! I didn't realise those things were so big.
Or are there various sizes?

Blériot53 Posted at 2-6 00:32
Crikey! I didn't realise those things were so big.
Or are there various sizes?

I custom designed and built this one from scratch.   I wanted to be able to print tall vases with it,  and the height on my design only increases the cost by having slightly longer uprights and a longer filament tube.  And of course it stands on a little table.   I'll PM you a link to a pic.

DAFlys Posted at 2-6 00:35
I custom designed and built this one from scratch.   I wanted to be able to print tall vases with it,  and the height on my design only increases the cost by having slightly longer uprights and a longer filament tube.  And of course it stands on a little table.   I'll PM you a link to a pic.

Astonishing stuff

Blériot53 Posted at 2-6 00:45
Astonishing stuff

I started with one as a kit,  which was mostly plastic that I ultimately redesigned the sides to be made from aluminium which I had laser cut,  then I went full on aluminium extrusion like the CNC machine.  

DAFlys Posted at 2-6 00:55
I started with one as a kit,  which was mostly plastic that I ultimately redesigned the sides to be made from aluminium which I had laser cut,  then I went full on aluminium extrusion like the CNC machine.

You're quite the innovator

Blériot53 Posted at 2-6 00:58
You're quite the innovator

I do enjoy making and repairing tools.  

DAFlys Posted at 2-5 05:53
Yes,   I have to admit to be cheered up by it.   Although we are clouding over now and getting a bit darker.  But I am ahead on tomorrow's schedule.

Good to have a little nice weather to make your day and tide you over until Spring.

DowntownRDB Posted at 2-6 11:05
Good to have a little nice weather to make your day and tide you over until Spring.

It was a glitch in the matrix I think as last night we had incredible wind,   Ive seen a few fences down this morning from it.  And now rain,  which is a pain as Im supposed to be on a photo/drone walk this morning.

DAFlys Posted at 2-6 23:53
It was a glitch in the matrix I think as last night we had incredible wind,   Ive seen a few fences down this morning from it.  And now rain,  which is a pain as Im supposed to be on a photo/drone walk this morning.

Glitch in the matrix - I like that.    No doubt mother nature fools us many times over.

DowntownRDB Posted at 2-7 04:37
Glitch in the matrix - I like that.    No doubt mother nature fools us many times over.

She likes to keep us on our toes.

DAFlys Posted at 2-7 04:52
She likes to keep us on our toes.

Indeed she does.

DowntownRDB Posted at 2-8 10:36
Indeed she does.

Thats a cracker.   I might steal that one.

DAFlys Posted at 2-9 02:02
Thats a cracker.   I might steal that one.

  You're welcome to it.  

Looks good!

Montfrooij Posted at 3-3 23:04
Looks good!

cheers Monty.  

DAFlys Posted at 3-4 01:19
cheers Monty.

My pleasure!