Interested in the Mic Mini kit, but I use microphones on occasion so most of the time the mics would sit in their charging case. And thats precisely my concern.
Usually I will charge any of my devices close to 100% and then remove them from charging, since generally its harmful for batteries to sit at 100% for periods of time. How does this affect the Mic kit, considering the TX's will be sitting at 100% a lot of the time?
I understand this is handy for those who us the mics often, but not for people likely to me who only use on occasion! I would have prefered a physical start/stop charge button the case ideally!

My other option is to go for the single RX/TX version, which would probbaly be adequate for me to be fair as I already have a DJI Mic 2 with my Pocket 3......

Thoughts?

Hi IftiBashir,

Thank You for reaching out. The LEDs turn off once the charging case is fully charged.
Smart Power Saving:
The DJI Mic Mini transmitter has a smart power-saving feature. When the transmitter is powered on and no signal is detected for matching connection within 15 minutes, it will enter power-saving mode. The receiver does not have this feature.

Auto Shutdown After Timeout:
Both the DJI Mic Mini transmitter and receiver support auto shutdown after a timeout. Once set, they can automatically turn off after 15 minutes of inactivity when not recording, helping to reduce unnecessary battery drain. The setting path is: DJI Mimo > DJI Mic Mini > Device Settings.

If the storage time exceeds 6 months, or the user sits idle for more than 6 months after charging, the battery of the charging box may be over-discharged. For battery maintenance guidelines you can refer to the Help Center: https://dji.ink/TiJv9E

I hope this information has helped to clarify your inquiries. If you have any other questions, kindly let us know. Thank You!

Thanks, although none of that really answered my query!

DJI Gamora Posted at 12-19 00:27
Hi IftiBashir,

Thank You for reaching out. The LEDs turn off once the charging case is fully charged.

I also have the same concern:
What happens leaving the 2 tx and the RX always in the case? Once the are at 100% the charge stops until the case is opened?
And also … for the tx is possible to see battery percentage when connected to a pocket3 or osmo action 5 pro.
But what about the tx, i am unable to see its battery percentage. If I pair the tx and rx to dji mimo app you only see a battery icon,
i think you should add the battery percentage as well it would be useful …
If there are other ways to check tx and rx battery percentage please let me know. Thank you