DJI smart controller work with air 2s?
181 4 2024-12-30
Uploading and Loding Picture ...(0/1)
o(^-^)o
Tonyvdb
lvl.4
Flight distance : 9852585 ft
Canada
Offline

I hope I did not make a mistake but I just found a DJI smart controller (the black one that was discontinued in 2021, so not the newer RC pro) for a great price but I am concerned it won't work with my air 2s. Can someone confirm this?
2024-12-30
Use props
RobZilla
Second Officer
Flight distance : 1057844 ft
  • >>>
United States
Offline

Just looked over in the Smart Controller forums area under Mavic Series, then in the firmware release thread and the Air 2S is compatible with the SC.

Feel free to double check, read some of the threads and if any possible issues...

https://forum.dji.com/forum.php? ... peid&typeid=568

2024-12-30
Use props
Tonyvdb
lvl.4
Flight distance : 9852585 ft
Canada
Offline

RobZilla Posted at 12-30 19:55
Just looked over in the Smart Controller forums area under Mavic Series, then in the firmware release thread and the Air 2S is compatible with the SC.

Feel free to double check, read some of the threads and if any possible issues...

Thank you very much, I was hoping it would work. Can you tell me (if you have one) is it better than the stock controller? I’m currently using the basic controller that came with my air 2s with an iPad mini4 and although I like the larger screen size it’s a bit dim in sunlight and I often get weak signal warnings when at 1500meters away or more and was hoping the extra antennas would improve this on the SC
2024-12-30
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Hi there,
thank you for reaching out.

The DJI Smart Controller is compatible with DJI Air 2S. If you want to know whether the accessories of the aircraft are universal/compatible, such as batteries, remote controls, chargers, etc., please refer to this article for help.

Aircraft Accessory Compatibility
2024-12-30
Use props
djiuser_15VA1Fy1pcOD
lvl.1
Italy
Offline

DJI Diana Posted at 2024-12-30 20:50
Hi there,
thank you for reaching out.

Good morning,
I have a DJI Air2S and a  Smart Controller that work normally.
Now I tried to certify the Air2S in C1 class.
I Did the Upgrade of the Firmware of the Drone to Version V02.04.2700 and of the Smart Controller to
V01.01.00.76.
When I try  to look for the  entry "drone remote identification" in Security scroll, this doesn't appear. I tried many times whitout achieve success.
What can I do?

Thank you very much if you can give me an help!
Zannoni Fabio
1-3 03:02
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules