My current version is
App 4.2.8Aircraft 01.01.0300
Remote 01.01.0010
Camera 01.07.20.98
I start the update procedure with the inspire 2 connected to my crystalsky via USB.
It download the fimware and start the update but after a while I got :
Update Failed Restart the Equipment and try again later.
Reason : 0x02010003
Same thing with dji assistant 2.
When it reaches update at 79%, the inspire reboot, then the procedure seems to continue and 2 minutes after that, I have a failure message (undefined 0x020103)
the debug.txt and erro.txt are empty
Thank you for the screenshot, we will need the upgrade log for further analysis, please exported the log via the steps below:
DJI Assistant 2 (Windows): C:/Users/XXXXXX/AppData/Roaming/DJI Assistant 2/upgrade_log
DJI Assistant 2(MAC): ~/Library/Application Support/DJI Assistant 2/upgrade_log
Once you get them, please upload to Dropbox or Google Drive and post the link here, thanks for your assistance in advance.
DJI Mindy Posted at 2018-4-24 00:20
Thank you for the screenshot, we will need the upgrade log for further analysis, please exported the log via the steps below:
DJI Assistant 2 (Windows): C:/Users/XXXXXX/AppData/Roaming/DJI Assistant 2/upgrade_log
DJI Assistant 2(MAC): ~/Library/Application Support/DJI Assistant 2/upgrade_log
OK, I figured a work around:
I disconnected the X5S and ran the update via the Crystal Sky which worked.
Reattached X5S and ran update via assistant 2 as it declared inconsistant modules - (guessing the batteries & camera) which worked.
Swapped to new set of batteries which updated OK.
Now going through the rest of my batteries updating the firmware on them.
Alex White Posted at 2018-4-30 12:38
OK, I figured a work around:
I disconnected the X5S and ran the update via the Crystal Sky which worked.
Reattached X5S and ran update via assistant 2 as it declared inconsistant modules - (guessing the batteries & camera) which worked.