mtnmaddman
lvl.4
United States
Offline
|
Mark Help me out on this I cant get any answers, When you say you cant hold altitude exactly what do you mean? When I return back from a flight my altimeter reads 30, 50 ft. or more at ground level, If I let it set and hover at several feet, it will eventually touch down on its own, Everything is calibrated on top of calibrated, It is apparently slipping in flight also, just looking at it it looks like it may either just be losing altitude constantly, or loosing a little each time you start to move forward or hit the brakes, with the altimeter not moving I can take it up to 200 ft hold it right there on the altimeter, fly around a while , come back to ground and I am off usually 30 to 50 ft. lower than what the altimeter says, It screws with my head, look at my avatar, check your altimeter after your flights for me and see what your getting, its easy not to notice after the flight, I have heard of a few doing this I just hope it is not a 600.00 component. http://forum.dji.com/thread-12667-1-1.html |
|