duke
lvl.1
United States
Offline
|
Absolutely sir: And thanks for your response.
ETA: Phantom 3 Professional
1. Firmware update
2. Reading of text file with "Successful" response.
3. R/C Controller update
4. Successful response
5. IMU recalibration, on a non-metallic bubble leveled surface, "cold" (cold, really...?) with "successful" response
6. Gimbal recalibration with successful response
7. On site GPS recalibration with successful response, careful to avoid any metal objects, (green lights)
8. "OK to fly" satellite response with 14-17 satellites reporting.
9. VPS turned off (...then again on, then off, then on , then off...don't know why, but I was told to do so in this forum)
and I forgot to add Android update to newest DJI Pilot app too
and still "toilet bowl" swirling and erratic flight behavior that jeopardizes the safety of the P3Pro and any people near it on the ground.
Straight out of the box (Before the update), I absolutely MARVELED at the "flying tripod" stability of the P3. I could hover it at 3 ft off the ground and then watch the P3 adjust its own altitude even by inches as it flew over curbs and other small imperfections on the ground. Flying over a curb at 3 ft and the P3 would, as if by magic, elevate itself to 3 ft plus 5 inches to compensate for the curb height. After the update, it flew with the response of a drunken teenager.
At this point, I cannot try anything else without risking injury to the equipment. And I cannot risk the equipment as I could not return it in good faith if it were wrecked due to firmware or even operator error. Unfortunately, my August deadline with the dispute resolution center doesn't give me time to wait for a factory warranty examination at an authorized repair center. |
|