Firmware 1.3.20-DJI Go 2.0.0 App Discussion Thread

Vermontflyer

Hello All, I apologize if I missed the info I need in the posts.
I'm stressing a bit, I downloaded the new firmware and put it in my drone like the last update but...
nothing is happening the camera light is not blinking and no beeps after the initial one as it turns on.

have I messed up or is there a software problem ?

I greatly appreciate any assistance !
Regards !

Quadifier

suaveaerial Posted at 2015-8-9 07:30
Just curious - I don't even see the DJI Pilot app available for download anymore from the DJI websit ...

I've been wondering myself why the Pilot App is not available anymore... at least until the new app becomes available for download. How are new owners supposed to be able to fly? The Pilot App DOES work OK with the new 1.3.20 ver FW. I flew two batteries last night using Pilot App and it was fine.

Bhaapala

yegorius Posted at 2015-8-4 21:04
I can not update the firmware on Phantom 3 Pro (v1.3.20). At first time updating process was about 2 ...

I had the same problem, only now I turn on the aircraft and its just really loud beeping-no led blinking. did you figure out what happened?

magart2.hotmail

sploodge Posted at 2015-8-4 16:02
Hovering is steady too.. Baro readings seem accurate again..

Sploodge, finally updated firmware today and it is like having a new bird, the thing flies absolutely perfect again. Hovers steady, vps works again and flies flawlessly.

magart2.hotmail

magart2.hotmail Posted at 2015-8-9 11:44
Sploodge, finally updated firmware today and it is like having a new bird, the thing flies absolut ...

P.S. Phantom 3 Pro, nexus 7 II and 1.3.20. Still running 1.20 app.

magart2.hotmail

kgjamison Posted at 2015-8-4 21:09
Thanks for the instructions! Question, I did not do the last update. Should I update the contoller ...

I just jumped to the 1.3.20 and all works fine. Phantom 3 Pro, nexus 7II.

dirk.liesenfeld

Booradley Posted at 2015-8-8 00:39
Hey Dirk,

I am also using the Samsung Galaxy Tab S and was wondering how you updated the remote c ...

I used the USB-Cable to update. You have to test different cables, some seem to work better than others.
I didn't downgrade the playservices and flew in very hot weather with direct sun onto the tablet - almost no video lag at all. Tried another flight with downgraded playservices and it was even better. But the difference is so slight, that I do not downgrade anymore, because the tablet is a daily driver for me.
I think, that the new DJGo App will be even perfect(er), so I am waiting for it, hoping and praying.
But I am a happy camper already (again)!

DanH

Updated to latest firmware and IOS DJI Go app.
Everything is working fine, hovering is rock solid, VPS works like a charm.

The only issue I encountered is that I cannot retrieve my flight logs anymore on the iPad Air 2. It looks like the iPad is recording something, but I cannot drag/drop the DJI Go files from iTunes as I did before.
Not sure if it is because I'm running IOS 9 Beta 3, but it worked fine with DJI Pilot.

sploodge

magart2.hotmail Posted at 2015-8-9 11:44
Sploodge, finally updated firmware today and it is like having a new bird, the thing flies absolut ...

Good to hear, happy flying..

nicadair6@aol.c

sploodge Posted at 2015-8-9 17:05
Good to hear, happy flying..

Greetings, I have never flown my new phantom 3 professional before, I'm currently updating the firmware.
In sploodge's post no29 the video shows solid red lights and flashing yellow and flashing camera light whilst upgrading, however my camera lights are inactive.

On my first flight which will be later this afternoon I have a nice big park to fly in but there are some very tall trees about and it's on hilly ground.

If it all goes pear shaped and I'm forced to hit the 'Return to Home' button is there a way I can keep the drone high above the tree line before hovering above me and descending?

sploodge

nicadair6@aol.c Posted at 2015-8-9 18:59
Greetings, I have never flown my new phantom 3 professional before, I'm currently updating the fir ...

HI, you can set the Return To Home ( RTH ) altitude in the app.. Its 20 meters by default.. RTH Altitude.jpg

Also if you are concerned about the status of the firmware update, you can post the TXT log files here so we can have a look..

Nic6

sploodge Posted at 2015-8-9 19:13
HI, you can set the Return To Home ( RTH ) altitude in the app.. Its 20 meters by default..

Also i ...

Many thanks,
I think I will set the RTH at 50 metres.

Phantom 3 updated fine, the remote is on version 1.2.0
First flight sometime this evening.
What can go wrong?

========== 2014.01.01 00:00:12 unsynchronized ======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.

Fulgerite

I ran the updates and everything went smoothly. I have run a couple of indoor test flights and all seems well so far. I plan to run some outdoor tests later today with GPS.

Nic6

Took it for a test flight, photos worked OK but video didn't come out, used the RTH and landed about 10 feet out on it's side, a couple of propellers whacked into the ground so I turned off straight away (left stick pulled back).

A few grass marks but the Phantom seems OK.

Bedford

Cash3p

dbeck@promobox. Posted at 2015-8-5 07:24
OK, I'm, getting the solid red/yellow blinking as well after 45 minues. I' ve re installed the bin ...

Not the aircraft lights....look at the tiny red/green light on the camera base in the front of the aircraft.

Cash3p

dbeck@promobox. Posted at 2015-8-5 07:24
OK, I'm, getting the solid red/yellow blinking as well after 45 minues. I' ve re installed the bin ...

Look at the tiny red/green camera light on the front of the camera (craft)...not the aircraft lights.

rodger

nothing happening with your reply. can't open anything?

rodger

sploodge Posted at 2015-8-4 17:01
How to Update the Firmware
Follow the process described below to upgrade the aircraft, remote contro ...

it is confirmed that I have a defective Controller.

mikeon

rodger Posted at 2015-8-10 08:36
it is confirmed that I have a defective Controller.

What problem were you having? FW 1.3.2 bricked my controller and I get "disconnected" in the GO app. DJI says I have to send the aircraft and controller in for repairs.

Phantom_Film

My experience so far with the new firmware.

I and a friend of minehere in Greece, with our P3P and ipad mini 2 tablets, had black screen problems after we went to 1.2.6.
When 1.3.2 came out a few days ago we upgraded.
Everything went fine on the procedure, updated firmware, dji go app and batteries.

Hardware deconding ON, and everything else checked. Original Apple cables for tablet.

I may say that we and my friend build and fly rc helicopters for 10 years now.

In our first flights we have some major black screens. In some flights there is almost no video at all. All the other information and rc control are fine. We get the NO SIGNAL and Disconnect errors.

We here in Europe i think dont have the chance to select channels and HD quality video. I believe it has much to do with the auto channels selection.

Anyway untill 1.1.8 our P3P were perfect now, we dont know if it is going to have video on screen in each flight.

We tried going back to the 1.1.9 firmware but no luck ! So back to the latest updates and hoping it gets better...

We love the P3P but we are dissapointed not beeing able to see image on screen, and hoping someone hears and find a solution.

quasimodo

sploodge Posted at 2015-8-4 15:57
VPS is definitely fixed for me...

Horizon drift is almost gone.. Need more testing to be sure..

iv tried it many times...on hard surface i cant get the horizon steady. it drifts...firmware 1.3.20.

quasimodo

Patinito Posted at 2015-8-5 12:31
Hello everyone, glad that DJI has finally released the new firmware. So I updated the phantom (P3P), ...

i've flown it already. im using android. but my drone already 1.3.20. the pilot app crash so many times. as it about to go fruther....lost of video feed. the program also lost. i restart it again no success...times running out. wheres my p3... cant see it. then no choice i initiate RTH function. so i press once. nothing happened????? i tried to memorize the manual that i read before. i looked into the sky....no sign of my P3...waited for 3 minutes. nothing. then i remembered there should be a sound to indicate RTH in progress. so i press 2nd time this time press until i hear a sound. now the RTH is initiated. same time try to get pilot app run again. then came the p3 above my head. so i canceled the RTH to continue flying....damned.....what a scary moment! then again

sploodge

quasimodo Posted at 2015-8-11 13:06
i've flown it already. im using android. but my drone already 1.3.20. the pilot app crash so many ...

Hopefully the Android DJI Go app will release soon that should resolve the video issue.

quasimodo

Quadifier Posted at 2015-8-9 09:29
I've been wondering myself why the Pilot App is not available anymore... at least until the new ap ...

yup. me too. app pilot can work with controller and p3. no signal problem...p3 works flawlessly...but not for app pilot. crash n crash....have to restart the app. but still have control of p3. thank God!

stanchula

Hello. I followed every direction and the .txt file comes back as a success but now whenever the plane is powered on I get no lights just a B-B-B-B-B... continuously. The "Gimbal cannot receive MC data" error pops up.

sploodge

stanchula Posted at 2015-8-11 22:30
Hello. I followed every direction and the .txt file comes back as a success but now whenever the pl ...

Format the card, put firmware back on it and place it back in the Phantom and power it on.. Leave it to do its loud beeps for about 10 mins. Should sort itself out and eventually give the happy Da...Da.Da beeps.

Let me know if it works..

stanchula

sploodge Posted at 2015-8-11 22:41
Format the card, put firmware back on it and place it back in the Phantom and power it on.. Leave i ...

That worked!! Thank you very much! One More question.. should I just keep the firmware on the sd card so my batteries will update as well?

robertodell

Anybody else getting grainy / non-HD video clips when creating them with the new app? Raw video from the P3A is all good. Once I create a "work" in the app, the video looks like SD played on an HD TV.

justin.owen

I'm still rocking f/w 1.1.8 but am contemplating upgrading after my Pilot app was overwritten with DJI GO yesterday. On searching the forum I spotted an announcement that said you *HAD* to upgrade to 1.1.9 before it was possible to upgrade to a newer firmware. I'm wondering how many people have tried to upgrade from 1.1.8 -> 1.3.2 and if this has caused any of the issues...?

Looking at all the issues I'm not looking forward to trying to complete two seperate f/w upgrades in one sitting!

b.wierda@chello

Upgraded the APP and it crashes upon booting.

Removed the APP and did a fresh install the same problem.

Android 4.3 Asus ME302C.

Older version worked fine

astrostar

b.wierda@chello Posted at 2015-8-12 22:48
Upgraded the APP and it crashes upon booting.

Removed the APP and did a fresh install the same prob ...

I'm having the same problems with the new DJI GO app crashing as soon as it boots ! I'm using a Hudl2 tablet which has performed well with the old DJI Pilot App 1.2.0. I have now re-installed the old app pending any update to the GO app.

EDIT

Problem solved by deleting the DJI Pilot folders and re-installing the new DJI GO app.

Phantom_Film

After many black screens and NO SIGNAL issue with the new firmware-app, today when i disabled video cache, everything went back to normal. 4 flights without issues.

I have ipad mini 2 cellular, original Apple cable, 8 channels and only auto selection. I am satisfied if video cache was my reason for black screens and no signal indication.

astrostar

b.wierda@chello Posted at 2015-8-12 22:48
Upgraded the APP and it crashes upon booting.

Removed the APP and did a fresh install the same prob ...

Have you tried uninstalling the DJI GO app and then deleting the DJI Pilot folders ? I've done this and the new app installed like a dream. You can use a program such as 'X-plore' which will allow you to navigate to the DJI Pilot folders in order to delete them prior to installing the new GO app.

b.wierda@chello

astrostar Posted at 2015-8-13 02:35
Have you tried uninstalling the DJI GO app and then deleting the DJI Pilot folders ? I've done thi ...

this worked, ty very much indeed

jorski@netti.fi

I have update my P3A with FW 1.3.20 and DJI GO app (Android). On the aplication, it show following data: App= 2.0.0 and Firmware is 1.2.8+.
Should it be 1.3.20????

Vermontflyer

sploodge Posted at 2015-8-9 19:13
HI, you can set the Return To Home ( RTH ) altitude in the app.. Its 20 meters by default..

Also i ...

hey Sploodge, would you look at my firmware update on my dji3 looks funky
not sure about update aborted at checking
appreciate your opinion -
- 00012227][01 00] Firmware upgrade finished successfully.
[00012334]Done.

[00012366]Packet [C:\P3X_FW_V01.02.0006.bin] resumed, card sn [0x80ce6499].
[00012403]Version checking[2]...
[00012469][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012528][03 06][00] v2.1.6.18 -> v2.2.6.8 need upgrade.
[00012567][04 00][00] v1.36.0.0 -> v1.38.0.0 need upgrade.
[00012613][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012729][11 00][00] v1.6.1.0 -> v1.6.0.0
[00012809][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012894][12 01][00] v1.8.0.0 -> v1.8.0.0
[00012984][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013084][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013215][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013314][17 00][00] v1.1.1.2 -> v1.1.1.6 need upgrade.
[00013434][17 01][00] v1.0.2.4 -> v1.0.2.5 need upgrade.
[00013493][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013525][01 00][05] v1.15.3056 -> v1.15.3056
[00013557][01 01][00] v1.6.2736 -> v1.15.3056 need upgrade
[00013595][08 00][00] v0.11.0.4 -> v0.11.0.4
[00013633]Done.

[00013666]Firmware upgrading[2]...
[00013810][01 01] Firmware upgrade start...
[00044071][01 01] Firmware upgrade finished successfully.
[00044131][17 00] Firmware upgrade start...
[00130460][17 00] Firmware upgrade finished successfully.
[00130509][17 01] Firmware upgrade start...
[00201183][17 01] Firmware upgrade finished successfully.
[00201232][03 05] Firmware upgrade start...
[00274464][03 05] Firmware upgrade finished successfully.
[00274678][03 06] Firmware upgrade start...
[00584216][03 06] Firmware upgrade finished successfully.
[00584278][04 00] Firmware upgrade start...
[00641832][04 00] Firmware upgrade finished successfully.
[00641868]Done.

[00641901]Version checking[3]...
[00641966][03 05][05] v34.2.0.9 -> v34.2.0.9
[00642026][03 06][05] v2.2.6.8 -> v2.2.6.8
[00642066][04 00][05] v1.38.0.0 -> v1.38.0.0
[00642109][09 00][00] v1.7.0.3 -> v1.7.0.3
[00642209][11 00][00] v1.6.1.0 -> v1.6.0.0
[00642315][12 00][00] v1.8.0.0 -> v1.8.0.0
[00642399][12 01][00] v1.8.0.0 -> v1.8.0.0
[00642579][12 02][00] v1.8.0.0 -> v1.8.0.0
[00642659][12 03][00] v1.8.0.0 -> v1.8.0.0
[00642782][15 00][00] v1.1.2.0 -> v1.1.2.0
[00642854][17 00][05] v1.1.1.6 -> v1.1.1.6
[00642969][17 01][05] v1.0.2.5 -> v1.0.2.5
[00643029][19 00][00] v1.0.8.96 -> v1.0.8.96
[00643062][01 00][05] v1.15.3056 -> v1.15.3056
[00643097][01 01][05] v1.15.3056 -> v1.15.3056
[00643140][08 00][00] v0.11.0.4 -> v0.11.0.4
[00643174]Packet upgrade finish successfully.

[00012447]========== 2015.07.08 21:53:36. boot(15) ============
[00012482]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012517]Packet upgrade start...

[00012555]Packet checking...
[00012593]Done.

[00012625]Version checking[1]...
[00012690][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012750][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012792][04 00][00] v1.38.0.0 -> v1.38.0.0
[00012854][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012975][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013064][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013145][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013220][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013310][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013450][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013537][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013665][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013716][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013751][01 00][00] v1.15.3056 -> v1.15.3056
[00013788][01 01][00] v1.15.3056 -> v1.15.3056
[00013849][08 00][00] v0.11.0.4 -> v0.11.0.4
[00013882]Packet upgrade cancelled at version checking.

[00012449]========== 2015.07.10 20:03:26. boot(15) ============
[00012488]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012524]Packet upgrade start...

[00012560]Packet checking...
[00012598]Done.

[00012635]Version checking[1]...
[00012720][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012805][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012850][04 00][00] v1.38.0.0 -> v1.38.0.0
[00012912][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013027][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013198][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013302][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013398][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013478][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013619][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013710][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013828][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013883][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013919][01 00][00] v1.15.3056 -> v1.15.3056
[00013956][01 01][00] v1.15.3056 -> v1.15.3056
[00014015][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014048]Packet upgrade cancelled at version checking.

[00013034]========== 2015.07.14 10:09:12. boot(15) ============
[00013067]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00013102]Packet upgrade start...

[00013149]Packet checking...
[00013192]Done.

[00013228]Version checking[1]...
[00013292][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013377][03 06][00] v2.2.6.8 -> v2.2.6.8
[00013419][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013477][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013597][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013688][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013769][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013843][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013935][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014068][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014141][17 00][00] v1.1.1.6 -> v1.1.1.6
[00014268][17 01][00] v1.0.2.5 -> v1.0.2.5
[00014321][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014358][01 00][00] v1.15.3056 -> v1.15.3056
[00014394][01 01][00] v1.15.3056 -> v1.15.3056
[00014448][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014488]Packet upgrade cancelled at version checking.

[00012449]========== 2015.07.16 20:07:15. boot(15) ============
[00012490]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012525]Packet upgrade start...

[00012564]Packet checking...
[00012597]Done.

[00012640]Version checking[1]...
[00012723][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012803][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012850][04 00][00] v1.38.0.0 -> v1.38.0.0
[00012976][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013102][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013192][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013292][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013392][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013492][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013657][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013751][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013886][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013936][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013980][01 00][00] v1.15.3056 -> v1.15.3056
[00014014][01 01][00] v1.15.3056 -> v1.15.3056
[00014060][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014093]Packet upgrade cancelled at version checking.

[00012475]========== 2015.07.18 20:41:10. boot(15) ============
[00012513]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012546]Packet upgrade start...

[00012586]Packet checking...
[00012624]Done.

[00012664]Version checking[1]...
[00012737][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012817][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012860][04 00][00] v1.38.0.0 -> v1.38.0.0
[00012912][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013037][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013137][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013238][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013323][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013413][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013541][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013623][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013762][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013813][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013848][01 00][00] v1.15.3056 -> v1.15.3056
[00013883][01 01][00] v1.15.3056 -> v1.15.3056
[00013932][08 00][00] v0.11.0.4 -> v0.11.0.4
[00013974]Packet upgrade cancelled at version checking.

[00012507]========== 2015.07.18 20:44:37. boot(15) ============
[00012542]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012577]Packet upgrade start...

[00012619]Packet checking...
[00012661]Done.

[00012707]Version checking[1]...
[00012786][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012948][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012997][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013067][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013186][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013299][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013396][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013479][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013574][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013721][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013794][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013934][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013994][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014034][01 00][00] v1.15.3056 -> v1.15.3056
[00014071][01 01][00] v1.15.3056 -> v1.15.3056
[00014125][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014168]Packet upgrade cancelled at version checking.

[00012553]========== 2015.07.18 20:46:35. boot(15) ============
[00012589]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012627]Packet upgrade start...

[00012670]Packet checking...
[00012708]Done.

[00012746]Version checking[1]...
[00012805][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012885][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012928][04 00][00] v1.38.0.0 -> v1.38.0.0
[00012983][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013085][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013159][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013262][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013394][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013483][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013620][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013715][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013855][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013919][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013958][01 00][00] v1.15.3056 -> v1.15.3056
[00014000][01 01][00] v1.15.3056 -> v1.15.3056
[00014058][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014095]Packet upgrade cancelled at version checking.

[00012530]========== 2015.07.19 17:13:15. boot(0) ============
[00012568]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012605]Packet upgrade start...

[00012653]Packet checking...
[00012761]Done.

[00012806]Version checking[1]...
[00012898][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012975][03 06][00] v2.2.6.8 -> v2.2.6.8
[00013031][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013098][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013216][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013304][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013384][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013484][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013570][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013712][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013784][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013920][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013975][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014015][01 00][00] v1.15.3056 -> v1.15.3056
[00014054][01 01][00] v1.15.3056 -> v1.15.3056
[00014115][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014158]Packet upgrade cancelled at version checking.

[00012488]========== 2015.07.19 17:14:43. boot(15) ============
[00012530]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012566]Packet upgrade start...

[00012609]Packet checking...
[00012653]Done.

[00012692]Version checking[1]...
[00012770][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012869][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012914][04 00][00] v1.38.0.0 -> v1.38.0.0
[00012969][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013084][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013179][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013303][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013405][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013505][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013648][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013734][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013854][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013905][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013944][01 00][00] v1.15.3056 -> v1.15.3056
[00013987][01 01][00] v1.15.3056 -> v1.15.3056
[00014049][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014088]Packet upgrade cancelled at version checking.

[00012497]========== 2015.07.19 17:16:06. boot(15) ============
[00012533]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012660]Packet upgrade start...

[00012707]Packet checking...
[00012748]Done.

[00012787]Version checking[1]...
[00012877][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012957][03 06][00] v2.2.6.8 -> v2.2.6.8
[00013006][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013077][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013199][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013292][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013389][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013470][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013561][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013698][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013781][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013928][17 01][00] v1.0.2.5 -> v1.0.2.5
[00014002][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014042][01 00][00] v1.15.3056 -> v1.15.3056
[00014081][01 01][00] v1.15.3056 -> v1.15.3056
[00014137][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014176]Packet upgrade cancelled at version checking.

[00012592]========== 2015.07.25 21:36:38. boot(15) ============
[00012629]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012670]Packet upgrade start...

[00012720]Packet checking...
[00012761]Done.

[00012805]Version checking[1]...
[00012886][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012946][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012996][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013057][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015670][11 00][00] v1.6.1.0 -> v1.6.0.0
[00015761][12 00][00] v1.8.0.0 -> v1.8.0.0
[00015841][12 01][00] v1.8.0.0 -> v1.8.0.0
[00015915][12 02][00] v1.8.0.0 -> v1.8.0.0
[00016006][12 03][00] v1.8.0.0 -> v1.8.0.0
[00016173][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016270][17 00][00] v1.1.1.6 -> v1.1.1.6
[00016395][17 01][00] v1.0.2.5 -> v1.0.2.5
[00016456][19 00][00] v1.0.8.96 -> v1.0.8.96
[00016502][01 00][00] v1.15.3056 -> v1.15.3056
[00016542][01 01][00] v1.15.3056 -> v1.15.3056
[00016597][08 00][00] v0.11.0.4 -> v0.11.0.4
[00016638]Packet upgrade cancelled at version checking.

[00012525]========== remo-con disconnect. boot(15) ============
[00012656]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012698]Packet upgrade start...

[00012742]Packet checking...
[00012783]Done.

[00012829]Version checking[1]...
[00012904][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012984][03 06][00] v2.2.6.8 -> v2.2.6.8
[00013039][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013094][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013205][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013294][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013385][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013485][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013575][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013730][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013814][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013934][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013994][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014039][01 00][00] v1.15.3056 -> v1.15.3056
[00014079][01 01][00] v1.15.3056 -> v1.15.3056
[00014146][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014185]Packet upgrade cancelled at version checking.

[00012521]========== 2015.07.27 19:37:28. boot(15) ============
[00012563]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012604]Packet upgrade start...

[00012656]Packet checking...
[00012701]Done.

[00012741]Version checking[1]...
[00012817][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012897][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012946][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013012][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013138][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013228][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013328][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013428][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013528][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013665][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013765][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013893][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013952][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013999][01 00][00] v1.15.3056 -> v1.15.3056
[00014041][01 01][00] v1.15.3056 -> v1.15.3056
[00014088][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014137]Packet upgrade cancelled at version checking.

[00012533]========== 2015.07.27 20:06:43. boot(15) ============
[00012573]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012615]Packet upgrade start...

[00012665]Packet checking...
[00012707]Done.

[00012748]Version checking[1]...
[00012819][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012904][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012953][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013017][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013143][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013235][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013330][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013422][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013519][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013678][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013766][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013906][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013965][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014014][01 00][00] v1.15.3056 -> v1.15.3056
[00014057][01 01][00] v1.15.3056 -> v1.15.3056
[00014114][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014162]Packet upgrade cancelled at version checking.

[00012551]========== 2015.07.27 21:01:23. boot(15) ============
[00012593]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x80ce6499].
[00012641]Packet upgrade start...

[00012686]Packet checking...
[00012730]Done.

[00012770]Version checking[1]...
[00012853][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012932][03 06][00] v2.2.6.8 -> v2.2.6.8
[00012984][04 00][00] v1.38.0.0 -> v1.38.0.0
[00013049][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013170][11 00][00] v1.6.1.0 -> v1.6.0.0
[00013258][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013358][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013457][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013559][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013722][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013812][17 00][00] v1.1.1.6 -> v1.1.1.6
[00013938][17 01][00] v1.0.2.5 -> v1.0.2.5
[00013995][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014038][01 00][00] v1.15.3056 -> v1.15.3056
[00014080][01 01][00] v1.15.3056 -> v1.15.3056
[00014229][08 00][00] v0.11.0.4 -> v0.11.0.4
[00014271]Packet upgrade cancelled at version checking.

[00012578]========== remo-con disconnect. boot(15) ============
[00012622]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012670]Packet upgrade start...

[00012715]Packet checking...
[00012761]Done.

[00012809]Version checking[1]...
[00012877][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012966][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00013016][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00013089][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013198][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00013299][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013395][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013495][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013568][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013696][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013784][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00013919][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00013988][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014032][01 00][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014077][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00014140][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00014179]Done.

[00016222]Waiting for user confirm...
[00026268]Timeout, start upgrade automatically.

[00026358]Firmware upgrading[1]...
[00038597][01 00] Firmware upgrade start...
[00012228][01 00] Firmware upgrade finished successfully.
[00012286]Done.

[00012327]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x80ce6499].
[00012374]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012453]Version checking[2]...
[00012517][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012598][03 06][00] v2.2.6.8 -> v2.2.6.19 need upgrade.
[00012651][04 00][00] v1.38.0.0 -> v1.40.0.0 need upgrade.
[00012706][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012816][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00012911][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012991][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013146][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013237][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013377][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013482][17 00][00] v1.1.1.6 -> v1.1.1.7 need upgrade.
[00013607][17 01][00] v1.0.2.5 -> v1.0.2.7 need upgrade.
[00013667][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013712][01 00][05] v1.23.3419 -> v1.23.3419
[00013757][01 01][00] v1.15.3056 -> v1.23.3419 need upgrade
[00013809][08 00][00] v0.11.0.4 -> v0.12.0.4 need upgrade.
[00013851]Done.

[00013896]Firmware upgrading[2]...
[00014049][01 01] Firmware upgrade start...
[00044328][01 01] Firmware upgrade finished successfully.
[00045198][08 00] Firmware upgrade start...
[00585533][08 00] Firmware upgrade finished successfully.
[00585598][17 00] Firmware upgrade start...
[00677740][17 00] Firmware upgrade finished successfully.
[00677793][17 01] Firmware upgrade start...
[00745388][17 01] Firmware upgrade finished successfully.
[00745444][11 00] Firmware upgrade start...
[00793741][11 00] Firmware upgrade finished successfully.
[00793979][03 06] Firmware upgrade start...
[01122019][03 06] Firmware upgrade finished successfully.
[01122087][04 00] Firmware upgrade start...
[01179909][04 00] Firmware upgrade finished successfully.
[01179951]Done.

[01179994]Version checking[3]...
[01180074][03 05][00] v34.2.0.9 -> v34.2.0.9
[01180158][03 06][05] v2.2.6.19 -> v2.2.6.19
[01180204][04 00][05] v1.40.0.0 -> v1.40.0.0
[01180314][09 00][00] v1.7.0.3 -> v1.7.0.3
[01180435][11 00][05] v1.7.0.0 -> v1.7.0.0
[01180528][12 00][00] v1.8.0.0 -> v1.8.0.0
[01180628][12 01][00] v1.8.0.0 -> v1.8.0.0
[01180729][12 02][00] v1.8.0.0 -> v1.8.0.0
[01180828][12 03][00] v1.8.0.0 -> v1.8.0.0
[01180958][15 00][00] v1.1.2.0 -> v1.1.2.0
[01181043][17 00][05] v1.1.1.7 -> v1.1.1.7
[01181183][17 01][05] v1.0.2.7 -> v1.0.2.7
[01181294][19 00][00] v1.0.8.96 -> v1.0.8.96
[01181337][01 00][05] v1.23.3419 -> v1.23.3419
[01181379][01 01][05] v1.23.3419 -> v1.23.3419
[01181447][08 00][05] v0.12.0.4 -> v0.12.0.4
[01181584]Packet upgrade finish successfully.

[00012575]========== 2015.08.09 14:00:16. boot(15) ============
[00012627]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012670]Packet upgrade start...

[00012720]Packet checking...
[00012771]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012816]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012861]Done.

[00012905]Version checking[1]...
[00013004][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013104][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013155][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013221][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013345][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013444][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013544][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013655][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013759][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013926][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014009][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014149][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014228][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014278][01 00][00] v1.23.3419 -> v1.23.3419
[00014323][01 01][00] v1.23.3419 -> v1.23.3419
[00014381][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014431]Packet upgrade cancelled at version checking.

[00012615]========== 2015.08.09 14:23:00. boot(15) ============
[00012659]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012703]Packet upgrade start...

[00012758]Packet checking...
[00012804]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012847]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012890]Done.

[00012941]Version checking[1]...
[00013037][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013134][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013184][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013294][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013417][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013511][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013612][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013712][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013812][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014041][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014138][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014263][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014333][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014379][01 00][00] v1.23.3419 -> v1.23.3419
[00014431][01 01][00] v1.23.3419 -> v1.23.3419
[00014484][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014530]Packet upgrade cancelled at version checking.

[00012581]========== remo-con disconnect. boot(15) ============
[00012634]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012680]Packet upgrade start...

[00012729]Packet checking...
[00012776]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012822]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012867]Done.

[00012913]Version checking[1]...
[00013003][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013099][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013152][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013218][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013343][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013443][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013527][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013643][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013743][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013899][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014007][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014147][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014225][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014275][01 00][00] v1.23.3419 -> v1.23.3419
[00014320][01 01][00] v1.23.3419 -> v1.23.3419
[00014386][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014436]Packet upgrade cancelled at version checking.

[00012594]========== 2015.08.09 14:42:03. boot(15) ============
[00012641]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012687]Packet upgrade start...

[00012736]Packet checking...
[00012790]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012837]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012882]Done.

[00012931]Version checking[1]...
[00013011][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013092][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013246][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013321][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013431][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013526][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013600][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013700][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013790][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013944][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014040][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014180][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014261][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014309][01 00][00] v1.23.3419 -> v1.23.3419
[00014356][01 01][00] v1.23.3419 -> v1.23.3419
[00014411][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014465]Packet upgrade cancelled at version checking.

[00012624]========== remo-con disconnect. boot(15) ============
[00012669]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012714]Packet upgrade start...

[00012773]Packet checking...
[00012824]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012869]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012919]Done.

[00012966]Version checking[1]...
[00013062][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013141][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013193][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013276][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013401][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013516][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013615][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013729][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013825][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013973][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014091][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014232][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014296][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014341][01 00][00] v1.23.3419 -> v1.23.3419
[00014387][01 01][00] v1.23.3419 -> v1.23.3419
[00014458][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014505]Packet upgrade cancelled at version checking.

[00012603]========== 2015.08.09 15:34:14. boot(15) ============
[00012652]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012786]Packet upgrade start...

[00012841]Packet checking...
[00012892]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012939]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012987]Done.

[00013037]Version checking[1]...
[00013123][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013205][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013275][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013353][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013485][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013586][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013676][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013779][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013876][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014045][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014131][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014283][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014344][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014391][01 00][00] v1.23.3419 -> v1.23.3419
[00014441][01 01][00] v1.23.3419 -> v1.23.3419
[00014505][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014554]Packet upgrade cancelled at version checking.

[00012619]========== 2015.08.13 19:41:46. boot(15) ============
[00012668]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012716]Packet upgrade start...

[00012773]Packet checking...
[00012824]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012871]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012925]Done.

[00012970]Version checking[1]...
[00013056][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013137][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013193][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013266][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013376][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013470][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013570][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013670][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013770][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013948][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014047][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014181][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014286][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014334][01 00][00] v1.23.3419 -> v1.23.3419
[00014462][01 01][00] v1.23.3419 -> v1.23.3419
[00014523][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014571]Packet upgrade cancelled at version checking.

[00012626]========== 2015.08.13 19:49:58. boot(15) ============
[00012676]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012724]Packet upgrade start...

[00012783]Packet checking...
[00012835]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012884]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012936]Done.

[00012987]Version checking[1]...
[00013065][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013169][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013240][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013311][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013447][11 00][00] v1.6.1.0 -> v1.7.0.0 need upgrade.
[00013547][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013647][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013752][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013831][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013986][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014072][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014223][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014291][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014339][01 00][00] v1.23.3419 -> v1.23.3419
[00014389][01 01][00] v1.23.3419 -> v1.23.3419
[00014453][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014503]Done.

[00016552]Waiting for user confirm...
[00026604]Timeout, start upgrade automatically.

[00026702]Firmware upgrading[1]...
[00026765][11 00] Firmware upgrade start...
[00074520][11 00] Firmware upgrade finished successfully.
[00074569]Done.

[00074617]Version checking[2]...
[00074688][03 05][00] v34.2.0.9 -> v34.2.0.9
[00074775][03 06][00] v2.2.6.19 -> v2.2.6.19
[00074842][04 00][00] v1.40.0.0 -> v1.40.0.0
[00074898][09 00][00] v1.7.0.3 -> v1.7.0.3
[00075028][11 00][05] v1.7.0.0 -> v1.7.0.0
[00075118][12 00][00] v1.8.0.0 -> v1.8.0.0
[00075209][12 01][00] v1.8.0.0 -> v1.8.0.0
[00075318][12 02][00] v1.8.0.0 -> v1.8.0.0
[00075393][12 03][00] v1.8.0.0 -> v1.8.0.0
[00075630][15 00][00] v1.1.2.0 -> v1.1.2.0
[00075714][17 00][00] v1.1.1.7 -> v1.1.1.7
[00075839][17 01][00] v1.0.2.7 -> v1.0.2.7
[00075898][19 00][00] v1.0.8.96 -> v1.0.8.96
[00075949][01 00][00] v1.23.3419 -> v1.23.3419
[00076003][01 01][00] v1.23.3419 -> v1.23.3419
[00076064][08 00][00] v0.12.0.4 -> v0.12.0.4
[00076115]Packet upgrade finish successfully.

[00012654]========== 2015.08.13 20:21:25. boot(15) ============
[00012700]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012754]Packet upgrade start...

[00012805]Packet checking...
[00012863]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012913]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012967]Done.

[00013018]Version checking[1]...
[00013103][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013204][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013277][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013351][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012665]========== 2015.08.13 20:21:53. boot(15) ============
[00012710]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012768]Packet upgrade start...

[00012828]Packet checking...
[00012878]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012932]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012979]Done.

[00013036]Version checking[1]...
[00013108][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013206][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013278][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013357][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013468][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013581][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013684][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013808][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013916][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014091][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014175][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014342][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014412][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014469][01 00][00] v1.23.3419 -> v1.23.3419
[00014515][01 01][00] v1.23.3419 -> v1.23.3419
[00014580][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014710]Packet upgrade cancelled at version checking.

[00012658]========== 2015.08.13 20:28:16. boot(15) ============
[00012708]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012764]Packet upgrade start...

[00012823]Packet checking...
[00012874]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012932]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012982]Done.

[00013036]Version checking[1]...
[00013125][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013200][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013274][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013354][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013481][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013580][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013677][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013780][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013880][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014058][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014150][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014275][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014355][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014409][01 00][00] v1.23.3419 -> v1.23.3419
[00014463][01 01][00] v1.23.3419 -> v1.23.3419
[00014526][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014580]Packet upgrade cancelled at version checking.

[00012659]========== 2015.08.13 20:28:54. boot(15) ============
[00012707]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012765]Packet upgrade start...

[00012821]Packet checking...
[00012874]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012930]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012982]Done.

[00013032]Version checking[1]...
[00013130][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013214][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013286][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013353][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013494][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013608][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013724][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013831][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013947][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014189][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014321][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014459][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014530][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014581][01 00][00] v1.23.3419 -> v1.23.3419
[00014633][01 01][00] v1.23.3419 -> v1.23.3419
[00014693][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014748]Packet upgrade cancelled at version checking.

[00012663]========== 2015.08.13 20:43:10. boot(15) ============
[00012712]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x80ce6499].
[00012771]Packet upgrade start...

[00012828]Packet checking...
[00012877]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012936]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00012989]Done.

[00013040]Version checking[1]...
[00013145][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013246][03 06][00] v2.2.6.19 -> v2.2.6.19
[00013304][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013380][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013525][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013641][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013760][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013870][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013975][12 03][00] v1.8.0.0 -> v1.8.0.0
[00014159][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014255][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014392][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014461][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014510][01 00][00] v1.23.3419 -> v1.23.3419
[00014569][01 01][00] v1.23.3419 -> v1.23.3419
[00014647][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014699]Packet upgrade cancelled at version checking.

sploodge

Vermontflyer Posted at 2015-8-14 09:01
hey Sploodge, would you look at my firmware update on my dji3 looks funky
not sure about update ab ...

The log shows you have successfully upgraded to 1.3.2...

Vermontflyer

sploodge Posted at 2015-8-14 13:50
The log shows you have successfully upgraded to 1.3.2...

Thanks for being so kind on checking it out !
I realized after I should of only copied the new update txt's so it was kinda rude to put that long txt on sorry about that !
flying tonight hopefully all goes well ,seeing a lot of negative feedback on the new update.

Thanks again !!

Fulgerite

sploodge

You are a very patient gentleman and a great asset to this Forum. Thank you for all of your posts!

ljwsteenbergen@

Same here. Flight behavior definitely improved. VPS seems to work (but had it switched off anyway) Horizon almost level (but not there yet). Happy with app and for the first time my android machine is updating the flightstats to the cloud properly so that the data match on both my iPad air and my Galaxy Tab pro.
So all in all this is really a big improvement!!