shifuw
New
Réunion
Offline
|
Hello there,
i would like to share my experience about a big problem i had with this update. (i share because i fixed it )
1- i installed iOS 9 on my ipad air 2 last friday
2- then just after, i updated the DJI Go app for my inspire
3- i tested the new app switching on the RC, then the bird, then the app (i will insist on this : after making an update, i always test the app before flying the bird. Rule 1, i never mount the propellers. I see so many people updating app or firmware and they direct try to fly the bird without a basic testing first. Rule 2, i try all the app's functions before trying a real flight. People should not feel so surprise to crash the bird by flying without tests !!!)
4- after 5 minutes, the new DJI GO app launched, the remote controler updated without me to confirm it !!! (looks like DJI created the first real IA :p thank you DJI )
5- the update failed and DJI GO app proposed me to retry the update, and i said yes, but after 12 minutes it failed again
6- problems started after the second fail
7- the inspire cam stoped working, no video anymore on the app, and no control of the bird possible
8- i rebooted both bird and RC, without succes. And the RC LED was cyan and not responding with the dji go app. i tryed to start the bird keep the RC off, and the camera started to move then stop 2 seconds after during the initializing. (not good) it was like the bird was not able to start initializing.
9- i tryed to rewrite firmware on the bird but the process was not able to launch !!!
10- i tryed to update my rc with the app and with external USB key and with external SD adapter, without success. The RC LED was still cyan and was not able to launch the update.
11- at this point i came on forums and spent all night reading about people that should have same problem (i did not really find someone with the same problem, but i guess they did not describe it perfectly, or my English is so bad :x )
12 - saturday : i downloaded dji go app 2.3.0 instead of 2.4.0 with a galaxy note 1 :x , then i tryed to connect to the RC, the app was slow because it is only a galaxy note 1, but the app was not asking for the RC updated.
13- i forced the update recognition on galaxy app by doing the Tahoe_Ed 's tip : press buttons , C1+ C2+ record + iso , then switch on the RC by keeping pressed 4 buttons, then launch dji go app. And the dji go app proposed me to upgrade the RC. (forgot to mention that i tryed this with iOS9 iPad air 2 but it did not work)
14- i tryed and it failed the first time, i tryed again and it failed 4 times. Then, the 5th atemp was good and the RC LED was solid blue and was beeping, then it was ok, update success !!!
15- i swithed on the bird and the bug disapeared after 10 seconds, the camera initialized, and the RC led turned green
16- after this i tryed again with my ipad air DJI GO App, and it worked perfectly, and i recovered the RC and the bird wich got the Bricked's symptoms.
Looks like the bug was due to the RC update with the new DJI GO app when runing iOS 9 !!!
So maybe guys when you think it is over, you can still find a solution before sending back your machine to DJI. I hope my contributioncan help someone.
Once again, sorry for my English but this is not my native langage
note : my RC is 600B serie
|
|