Mzp
Core User of DJI
United States
Offline
|
howardlawman194 Posted at 9-11 23:54
Thanks so much for that great tutorial. When I first turned on the Mavic 3 and then the controller, no window popped open re upgrading firmware. I guess it was supposed to but it didn't. Then I ralized I had to connect the controller to the PC and then open DJI Assist, then, voila. Mission accomplished. Thanks to much for the assist. Much appreciated.
Hi Howard,
Just wanted to add 2 cents I realize you don't need this info now, but just for your convenience in the future. If you want to do firmware updates over the air (without connecting your drone and remote to PC via Dji Assistant 2) , you can just turn on your RC Pro or if you have another RC with phone without turning on your drone yet, then connect your RC Pro or whichever controller you are using to wifi and you will get that prompt to update firmware whenever new firmware comes up. (the drone needs to be not powered on yet to get this new firmware prompt). Then you can power up your drone and continue with the update. Hope this helps.
Thanks, Mike.
P.S. If you prefer to power on your drone at the same time as the controller, you can use the back button on RC Pro or whichever controller to go to DJi Fly app welcome screen , which would have the firmware update prompt there. |
|