DJI Gamora
Administrator
Offline
|
Hi, Andre. Thank you for reaching out. Here are some tips on How to maintain the DJI Avata intelligent flight batteries:
1. Do not charge the battery immediately after flight as it may be too hot. Wait until it cools down to the room temperature.
2. The temperature range for charging is from 5 to 40°C, and the ideal range is from 22 to 28 °C as it will significantly prolong the battery life.
3. Store the battery in a cool place.
4. Before storage, charge the battery to 50-60%, and fully charge it at least once every three months in case that its battery cell will be malfunctioning due to over-discharge.
We currenlty don't have an information when the next update will be available but in case that there will be an update on May, it is recommended to do it after the activation so that you can link the drone to the Goggles and Remote Controller V2. As for the motion controller, in case you would want to use it, please activate it first then update the firmware. You can activate the motion controller after linking it to the DJI Fly app via the DJI FPV Goggles V2/DJI Goggles 2.
Here are the two methods on how to update the firmware of the DJI Motion Controller:
Method 1:
1. Link the DJI FPV/DJI Avata drone to the DJI FPV Goggles V2(or DJI Goggles 2 when you use DJI Avata).
2. Link the DJI FPV/DJI Avata drone to the DJI Motion Controller.
3. Link the DJI FPV Goggles V2(or DJI Goggles 2) to the mobile device.
4. Open the DJI Fly app, check the firmware version, or update the firmware to the latest version at the upper left corner of the app homepage.
Method 2:
1. Connect the Motion Controller to DJI Assistant 2 (Consumer Drones Series) to update the firmware. Download link: https://www.dji.com/downloads/products/avata
We hope this helps. Thank you for your valued support. |
|