Setup compatibility Canon R6 Mark II

fanscbb11d21

Hello everyone,
I'm about to buy an RS3 but I'd like to know if any of you are using the following setup on an RS3:

- Canon R6 Mark II
- RF-EF conversion ring
- EF 24-70mm f2,8 L II lense
- Atomos Ninja

I'd like to be sure that the camera doesn't touch/block the RS3. In depth for example? And if this setup can be balanced correctly.

Thanks in advance

Tom

DJI Paladin

Hi there. Thank you for reaching out. The weight of the EF 24-70mm F2.8 lens and RF-EF conversion ring paired together is greater than the weight of the R6II camera, if you are trying to use this with the RS3, there may be a collision with the horizontal roller arm, and if the lens still needs to be zoomed in. The recommendation is to use the DJI RS 3 PRO to get a better use out of it. Hope this helps. Thank you for your valued support.

fanscbb11d21 · 2023-10-30

DJI Paladin Posted at 10-2 02:33
Hi there. Thank you for reaching out. The weight of the EF 24-70mm F2.8 lens and RF-EF conversion ring paired together is greater than the weight of the R6II camera, if you are trying to use this with the RS3, there may be a collision with the horizontal roller arm, and if the lens still needs to be zoomed in. The recommendation is to use the DJI RS 3 PRO to get a better use out of it. Hope this helps. Thank you for your valued support.

Thank you very much for your assistance.

DJI Paladin

fanscbb11d21 Posted at 10-30 09:35
Thank you very much for your assistance.

You are most welcome. Please don't hesitate to reach us if you have other inquiries. Have a nice day!

Skyfire1201

HI there, I am a new member and have a different problem: when I connect my R6 mkii with Ronin RS3 via the USB-C cable, I can not figure out how to enable the full remote control capabilities of the gimbal, as stated in the DJI compatibility web page. For instance, how do I change the Iso/shutter/aperture from the gimbal? I've read the manual and it's no help.