tgfa
lvl.1
Flight distance : 71575 ft
Australia
Offline
|
Hi,
Having the same (similar) issue I think. Did an update to App/RC/Phantom 3 on Tuesday, went to take it for a training flight today and at first, the DJI Go App wouldnt connect, so I used my iPhone (correct version of the App) and now the RC is saying RC Signal Lost. I've tried a resink. that didnt work. I've tried updating the firmware on the Phantom again but that didnt work and now I am getting an earpiercing D D D D whenever I turn the Phantom on. No other lights and NO connection. Help?
Copy of last update from P3X_FW_LOGAB.txt
[00013233]========== remo-con disconnect. boot(15) ============
[00013267]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x50ce4ee8].
[00013303]Packet upgrade start...
[00013347]Packet checking...
[00013389]Packet vlink 01.08.0080 <-> 01.07.0060.
[00013428]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00013466]Done.
[00013501]Version checking[1]...
[00013583][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013667][03 06][00] v2.4.13.0 -> v2.4.14.5 need upgrade.
[00013713][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00013823][11 00][00] v1.7.15.1 -> v1.7.15.1
[00013911][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013991][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014087][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014182][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014350][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014435][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014550][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014610][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014648][01 00][00] v1.29.4920 -> v1.30.5036 need upgrade
[00014684][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00014745][08 00][00] v0.13.0.7 -> v0.13.0.7
[00014810][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00014848]Done.
[00016889]Waiting for user confirm...
[00026927]Timeout, start upgrade automatically.
[00026999]Firmware upgrading[1]...
[00039800][01 00] Firmware upgrade start...
[00012233][01 00] Firmware upgrade finished successfully.
[00012276]Done.
[00012315]Packet [C:\P3X_FW_V01.08.0080.bin] resumed, card sn [0x50ce4ee8].
[00012358]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012399]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00012447]Version checking[2]...
[00012514][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012589][03 06][00] v2.4.13.0 -> v2.4.14.5 need upgrade.
[00012647][04 00][00] v1.41.0.0 -> v1.44.0.0 need upgrade.
[00012750][11 00][00] v1.7.15.1 -> v1.7.15.1
[00012819][12 00][00] v1.10.0.0 -> v1.10.0.0
[00012921][12 01][00] v1.10.0.0 -> v1.10.0.0
[00012998][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013098][12 03][00] v1.10.0.0 -> v1.10.0.0
[00013253][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013321][17 00][00] v1.1.1.7 -> v1.1.1.7
[00013451][17 01][00] v1.0.2.7 -> v1.0.2.7
[00013514][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013554][01 00][05] v1.30.5036 -> v1.30.5036
[00013595][01 01][00] v1.29.4920 -> v1.30.5036 need upgrade
[00013652][08 00][00] v0.13.0.7 -> v0.13.0.7
[00013708][09 00][00] v2.13.0.0 -> v3.0.0.10 need upgrade.
[00013749]Done.
[00013787]Firmware upgrading[2]...
[00013936][01 01] Firmware upgrade start...
[00044215][01 01] Firmware upgrade finished successfully.
[00044462][03 06] Firmware upgrade start...
[00012752]========== remo-con disconnect. boot(15) ============
[00012796]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x50ce4ee8].
[00012836]Packet upgrade start...
[00012879]Packet checking...
[00012919]Packet vlink 01.08.0080 <-> 01.07.0060.
[00012963]Record vlink 01.07.0060 <-> 01.06.0040 (flow = 0).
[00013001]Done.
TIA |
|