New Firmware for Phantom 3 Pro/Adv has been Released
Home / Products / Phantom Series / Phantom 3 Pro/Adv
1 ...3456789101112... 12879Next >
515158 515158 2016-6-13
Uploading and Loding Picture ...(0/1)
o(^-^)o
jacmac64
lvl.3

+ Add Friend Person Message
Offline

  281#

userd59c41b758
My did exactly what yours is doing. See the last post on page 6.

You can reinstall the previous firmware (Firmware v1.8.80)
Just load it on your sd card.
I did this multiple times between the two, and every time the Firmware v1.9.60 failed and Firmware v1.8.80 worked.
2016-7-1
Use props
capbat
lvl.4
Flight distance : 54905 ft
  • >>>
+ Add Friend Person Message
Canada
Offline

  282#
Marv JS Posted at 2016-6-13 20:56
Just updated new firmware to my Advance and the SD card reads successful in updating to 1.9.6 but th ...

Same here.
My DJI APP V 2.8.1 on Android still shows 1.8.80+ after successful update according to .txt file.

Did not fly since.

Bat
2016-7-2
Use props
scwillis60
New

+ Add Friend Person Message
United States
Offline

  283#
jacmac64 Posted at 2016-6-20 17:11
I've had my P3P for over a year now and done every update and all of them were flawless. Until now!
...

I have same problem.  The Drone is 10 feet away and my video transmissions is spotty.  Never had this issue before upgrade.
deleted the app and reinstalled.  Won't know till tomorrow if it works for me.  Someone posted that it worked for them.  Honestly, this is not differenent that almost all of my stuff when I upgrade they seem to break something.  I'm sure eventually they will get it all right, but hope my drone doesn't fall out of the sky before that happens.  Seems they add new features and other things don't work.  Very typically of technology.  Programmers can't test all scenearios.


2016-7-2
Use props
Phil Mel
lvl.1
Flight distance : 313898 ft

+ Add Friend Person Message
Mexico
Offline

  284#
scarper Posted at 2016-6-13 05:27
Is this all the changes...or are there hidden features added/removed. I would like (for once) to see ...

Sombody tell me if DJI removal functions Point of Interest, Follow Me, Way Points, etc on the new firmware???? Thxs
2016-7-3
Use props
ELISEU
lvl.1

+ Add Friend Person Message
Brazil
Offline

  285#


Anyone who has upgraded to firmware v1.9.60 was all right ??? It seems that everyone has problem !!! I will leave with my same old version . It's working correctly.
2016-7-3
Use props
zakarus
New

+ Add Friend Person Message
United States
Offline

  286#
So I tried updating today and now I get the "no video transmission". Everything else works, can take off, fly and film, but have no idea what it's filming. Did this update just break my P3?!
2016-7-3
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  287#
zakarus Posted at 2016-7-4 05:00
So I tried updating today and now I get the "no video transmission". Everything else works, can take ...

Please post the log file as they do above. Thanks.
2016-7-3
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  288#
Phil Mel Posted at 2016-7-4 01:44
Sombody tell me if DJI removal functions Point of Interest, Follow Me, Way Points, etc on the new  ...

These intelligent functions are still there. You can find them when the drone is switched to F mode and touch the remote button on the left of the screen which is above the attitude indicator.
2016-7-3
Use props
zakarus
New

+ Add Friend Person Message
United States
Offline

  289#
DJI-Paladin Posted at 2016-7-3 20:37
Please post the log file as they do above. Thanks.

So in attempting to get the log file it actually updated. I guess 9th times the charm.
2016-7-3
Use props
fleis
lvl.1

+ Add Friend Person Message
Uruguay
Offline

  290#
Hi, I updated mi P3A with the last 1.09.0060 FW, and I received the Success at the log, but when I check the log inside the MISC folder, I see a " [00013639][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support."
This message in the log is normal ? I mean the message said "firmware 1.8.0.0 not support", is it normal or do I need to update something else?

Thanks

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.09.0060.bin
Upgrading ...
Result: Success.


[00012976]Version checking[1]...
[00013100][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013221][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013313][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013479][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013639][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013727][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013852][12 00][00] v1.10.0.0 -> v1.10.0.0
[00014012][12 01][00] v1.10.0.0 -> v1.10.0.0
[00014127][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014248][12 03][00] v1.10.0.0 -> v1.10.0.0
[00014344][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014462][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014624][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014729][19 00][00] v255.255.255.254 -> v1.0.8.96
[00014811][01 00][00] v1.23.4920 -> v1.23.4920
[00014893][01 01][00] v1.23.4920 -> v1.23.4920
[00015008][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015091]Packet upgrade cancelled at version checking.
2016-7-3
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  291#
fleis Posted at 2016-7-4 10:57
Hi, I updated mi P3A with the last 1.09.0060 FW, and I received the Success at the log, but when I c ...

Don't worry. This Log is normal.
2016-7-3
Use props
fleis
lvl.1

+ Add Friend Person Message
Uruguay
Offline

  292#
DJI-Paladin Posted at 2016-7-4 00:05
Don't worry. This Log is normal.

Cool! Thanks!
2016-7-3
Use props
richardredhawk
New

+ Add Friend Person Message
United States
Offline

  293#
I received my controller back from repair this week and when I started the unit  it worked until it said update required and would not function till I did the update now nothing works  and I tried it on all 3 of my android devices and the same on all of them nothing
2016-7-3
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  294#
richardredhawk Posted at 2016-7-4 11:56
I received my controller back from repair this week and when I started the unit  it worked until it  ...

Was the RC updating successful?
2016-7-3
Use props
richardredhawk
New

+ Add Friend Person Message
United States
Offline

  295#
DJI-Paladin Posted at 2016-7-3 23:01
Was the RC updating successful?

As far as I know there were no download errors noted at any time during the install
2016-7-3
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  296#
richardredhawk Posted at 2016-7-4 12:27
As far as I know there were no download errors noted at any time during the install

What's the color of the RC led indicator now?
2016-7-3
Use props
richardredhawk
New

+ Add Friend Person Message
United States
Offline

  297#
I turned off the unit several hours ago and at the time the power button was red and the charge indicator leds were all green
2016-7-3
Use props
DJI-Paladin
Administrator
Flight distance : 2408 ft
+ Add Friend Person Message
Hong Kong
Offline

  298#
richardredhawk Posted at 2016-7-4 12:33
I turned off the unit several hours ago and at the time the power button was red and the charge indi ...

Try to relink the RC and drone:
2016-7-3
Use props
donniepitflyer
lvl.2
Flight distance : 959173 ft
+ Add Friend Person Message
United Kingdom
Offline

  299#
I  have been trying everything on the forums to get my phantom 3p to fly since the firmware upgrade, there were no issues with range on the quarry's that I video on for the last 2.5 yrs but now I get no or weak video intermittently at anywhere from 4 to 499 m which ain't good when trying to do continuous video etc, so with heavy heart I will be purchasing the typhoon h today, very sad but finding these upgrades problematic with work. Any advise on whether typhoon has issues.
2016-7-3
Use props
huntcool001
lvl.3

+ Add Friend Person Message
Hong Kong
Offline

  300#
donniepitflyer@ Posted at 2016-7-4 02:36
I  have been trying everything on the forums to get my phantom 3p to fly since the firmware upgrade, ...



Not sure about the actual quality of Typhoon drone, but the customer service seemed problematic, maybe on the 2014 levels of DJI (DJI has improved a lot since then).


If your DJI plane can't fly due to firmware issue, simply do a free exchange with DJI and it takes less than two weeks.
2016-7-3
Use props
richardredhawk
New

+ Add Friend Person Message
United States
Offline

  301#
DJI-Paladin Posted at 2016-7-4 01:02
Try to relink the RC and drone:
https://youtu.be/GNIqifYefow?list=PL8-vxWY64sBMWJEBFEM6Jc_nLk0zfyP ...

Did the reset on the unit and so far everything is working now.
2016-7-4
Use props
arvassil
lvl.2
Flight distance : 401857 ft
+ Add Friend Person Message
Offline

  302#
arvassil Posted at 2016-6-23 03:59
Just updated my P3A + 2 batteries to v1.9.60. Flawless operation and connection to RC. Will report b ...

First flight with 1.9.60 was simply excellent. No problems at all!
2016-7-4
Use props
UCLABruins
lvl.2
Flight distance : 488904 ft

+ Add Friend Person Message
United States
Offline

  303#
should the controller or bird be updated first?
Well, I went ahead and tried updating the controller firmware first but it failed with the message "Failed to upgrade. Current version: 1.6.0 Upgrade version 1.6.0"
I'm guessing I need to upgrade the bird first?
2016-7-5
Use props
UCLABruins
lvl.2
Flight distance : 488904 ft

+ Add Friend Person Message
United States
Offline

  304#
Nevermind, either I'm stupid or the manual is stupid. It looks like the latest controller version is 1.6.0

                                          GO app                           Aircraft            Remote Control
Phantom 3 Professional        Android 2.8.1, iOS 2.8.3        1.9.60 (previous 1.8.80)        1.6.0
Phantom 3 Advanced        Android 2.8.1, iOS 2.8.3        1.9.60 (previous 1.8.80)        1.6.0

Update:I couldn't wait for help from you guys so I just went ahead and follow the video and manual instructions.
Surprise, surprise...... everything went okay...I think

This looks okay right? I updated the bird and three batteries.


========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2016.04.14 17:57:49 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

2016-7-5
Use props
Guerinomaione
lvl.2
+ Add Friend Person Message
Italy
Offline

  305#
richardredhawk Posted at 2016-7-4 16:00
Did the reset on the unit and so far everything is working now.

Hi, excuseme for my english....
How did you do the reset?
2016-7-6
Use props
trisugengs
lvl.1
Flight distance : 3071 ft
+ Add Friend Person Message
Indonesia
Offline

  306#
NEED HELP!
I got some problems.
After I updated my RC to 1.6.0 and aircraft to 1.8.8.0,  I can't operate my drone more than 30 meters away, cant go further. And always got lost signal after that. How can I fix that ?

Note: I'm using dji phantom 3 pro
2016-7-6
Use props
aljoseph
lvl.2

+ Add Friend Person Message
Offline

  307#
Just updated my P3A with 2 batteries and I now get a new message on iPad and I can NOT confirm either option nor will the screen message go away after rebooting the app. The "confirm" block will not result in the message accepting my checked indicator. Now what????
2016-7-7
Use props
UCLABruins
lvl.2
Flight distance : 488904 ft

+ Add Friend Person Message
United States
Offline

  308#
trisugengs Posted at 2016-7-6 21:18
NEED HELP!
I got some problems.
After I updated my RC to 1.6.0 and aircraft to 1.8.8.0,  I can't o ...

Might as well go to the next firmware version release. Post the log file
2016-7-7
Use props
elliottdines
lvl.1

+ Add Friend Person Message
United Kingdom
Offline

  309#
why is it such a ball ache for firm ware updates on these?
I'm using  a mac book pro, download the firmware, tried opening it, only another smaller bin file comes out. Tried with this new smaller file, as well as original larger bin, neither update. I get a few green blinks to start, then just stays solid green and does nothing.

tried with  a larger card, and seems to now be updating.
2016-7-7
Use props
Vakhno
New

+ Add Friend Person Message
Georgia
Offline

  310#
Ultra short video range and video frame rate problem!  sometimes it's 3 frame per second (not FPV, recorded video) can I downgrade it?
2016-7-7
Use props
rlp0464
lvl.1
Flight distance : 1399934 ft
+ Add Friend Person Message
United States
Offline

  311#
DJI-Ken Posted at 2016-6-13 15:54
Format the SD card, download the Zip file from the correct DJI webpage (Pro or Advanced)
Extract t ...

I have aP3advanced, and have updated it previously.  I have updated the RC, and the app.  I am trying to upload the new firmware to the aircraft, and have tried multiple times.  I have been in contact with DJI support, and chat, and I keep getting the same instructions.  I know what to do, but the green light on the front of the gimbal stays solid green.  The beeps don't change either, but the gimbal does go limp.  
I use the DJI website for the firmware download; extract the zip file, load the .bin file onto a formatted SD card, insert it into the aircraft;  start the aircraft with the .bin file in it, but it doesn't upgrade.  I have tried 3 separate SD cards, all formatted.  I have plugged the aircraft into the computer using the micro USB cord, and loaded the .bin file that way.
All to no avail, it does not update.  It shows the aircraft as needing the new firmware too.

What am I doing wrong?  Do I need to send it back for factory support?

Why do the firmware updates seem to cause so much trouble?  This is pretty frustrating, especially since the new part 107 rules take effect august 29, and I need the phantom to be ready to open my business.
Can you help?  What am I missing?
Rob
2016-7-7
Use props
rlp0464
lvl.1
Flight distance : 1399934 ft
+ Add Friend Person Message
United States
Offline

  312#
rlp0464 Posted at 2016-7-7 21:51
I have aP3advanced, and have updated it previously.  I have updated the RC, and the app.  I am try ...

It seems to get worse.  Now when I check aircraft status on the app, when Im connected to the aircraft, it gives me the red triangle, saying i need an update, but it won't let me advance to the next page to show me exactly what firmware update i need?  its like the app is locked up as well.  What am i missing, again?
2016-7-7
Use props
DJI-Ken
DJI team
Flight distance : 1515312 ft
  • >>>
+ Add Friend Person Message
Offline

  313#
rlp0464 Posted at 2016-7-8 09:51
I have aP3advanced, and have updated it previously.  I have updated the RC, and the app.  I am try ...

Since the gimbal is going limp there's maybe an issue.
Can you post the hidden log file after a firmware attempt and I can see what's going on.
Also a screenshot of the Aircraft Status and About page.

Windows system :
http://windows.microsoft.com/en- ... den-files=windows-7
Mac system :
http://ianlunn.co.uk/articles/qu ... mac-os-x-mavericks/

2016-7-7
Use props
rlp0464
lvl.1
Flight distance : 1399934 ft
+ Add Friend Person Message
United States
Offline

  314#
rlp0464 Posted at 2016-7-7 22:34
It seems to get worse.  Now when I check aircraft status on the app, when Im connected to the airc ...

So i chatted with DJI, and solved the problem.  Thanks DJI!
2016-7-7
Use props
rprobinette
lvl.2
Flight distance : 69 ft
+ Add Friend Person Message
United States
Offline

  315#
DJI-Ken Posted at 2016-6-13 14:54
Format the SD card, download the Zip file from the correct DJI webpage (Pro or Advanced)
Extract t ...

I went to the DJI web site where I have downloaded all of my updates under the P3A area of the website and there is not a place to download the zip file like there is on the P3P area. Why is it not listed where I have always downloaded them
2016-7-8
Use props
DJI-Ken
DJI team
Flight distance : 1515312 ft
  • >>>
+ Add Friend Person Message
Offline

  316#
rprobinette@pin Posted at 2016-7-9 04:06
I went to the DJI web site where I have downloaded all of my updates under the P3A area of the web ...

It's there.
http://www.dji.com/product/phantom-3-adv/info#downloads
2016-7-8
Use props
rprobinette
lvl.2
Flight distance : 69 ft
+ Add Friend Person Message
United States
Offline

  317#
Found it, thanks
2016-7-8
Use props
donniepitflyer
lvl.2
Flight distance : 959173 ft
+ Add Friend Person Message
United Kingdom
Offline

  318#
I have had enough with firmware upgrades, my phantom 3 pro looses video feed every couple of minutes now since firmware update at various distances and since I mostly do video it's no good, I have been flying the same sites in my job with no range issues for the past couple of years but now p3p is a brick so have bought myself a typhoon h and no issues with range at all on same sites
, lucky for me my inspire still flys beautifully because didn't do last couple of upgrades so I have one foot in each camp, love the inspire and used to love the pro but alas it has been retired and replaced with yuneec
typhoon pro ,come on DJI  I used to like your birds but if I can't use them it's time for a change
2016-7-9
Use props
dbostock
lvl.2

+ Add Friend Person Message
Australia
Offline

  319#
I thought I was the only person with the range issue on my P3 till I read multiple people with same issue!
Since the last firmware update 1.9.6 my range is very bad, only about 500meters and I lose video feed, it comes up on my screen with message that the signal is lost or to that effect, I have tried on 2 different devices. On one occasion my P3P came back to me via return to home and only returned signal when it was almost above me! I don't feel very safe with flying it because of this issue now. What needs to be done to resolve this.. how can I downgrade this bad firmware update? previous to this I was flying without any problems very far distances. I think its pretty obvious if multiple people are bringing up this problem there is a firmware issue not a hardware issue with the drone.. is DJI saying there was a bad batch? all I have done is a firmware update, since which these problems now occur.
2016-7-10
Use props
dewulf.harry
lvl.1
Flight distance : 86348 ft
+ Add Friend Person Message
Belgium
Offline

  320#
do we need to update the controller to?
2016-7-10
Use props
1 ...3456789101112... 12879Next >
Advanced
Bold Text Color
Upload
Picture Add Link Emoticon
You need to log in before you can reply Login | Register now

Credit Rules