Donnie
First Officer
Flight distance : 3636782 ft
United States
Offline
|
Ok, received your e mail, this all points to the RC nbot being updated correctly :
Ok , if you think may have " re set " ( which I think you have done with the symptoms ) the transmitter what i need you to do is this :
We are going to try the thumb drive method again, where we use the Thumb drive and plug the file into the Thumb drive and load it to the RC Trtansmitter USB port,( make sure the Aircraft is off.)
This is a two step process :
My thinking is this all comes down to the RC Transmitter. The first file I want you to load is this one right here :
http://download.dji-innovations. ... _FW_V01.04.0030.bin
Laod this file on a clean formatted Thumb drive and follow the directios at the very beginning of this thread . ( fomat thumb drive , drag and drop bin file to thumb drive )
If it loads let me know , then we are going to do the same thing again, but this time with another Thumb drive file . Make sure once agtain to format the thumb drive and erase the prvious data on the thumb drive ( 1.4 bin file )
https://dl.djicdn.com/downloads/ ... _FW_V01.06.0000.bin
ALSO , IF THERE IS ANY WAY TO GET AN IPAD AIR OR I PAD PRO ( NOT THE GREAT BIG ONE THAT IS APPROX 12.7 INCHES ) OR AT LEAST SOMETHING THAT IS ON THE APRROPVED LIST , I WOULD FEEL ALOT BETTER ABOUT IT .
Also use the Master RC to do this update , if you started to use the Slave without linking it and going through the corredct link procedure , it will not work . USE THE ORIGINAL RC MASTER FOR THE ABOVE PROCEDURE.
Lets give this a try , read the first post on this thread for more instructins on how to load via thumb drive.
ALSO READING YOUR E MAIL - ARE YOU USING THE USB PORT ON THE TRANSMITTER, AND THEN PLUGGING THE OTHER END INTO SAMSUNG (GO APP )
JUST WANT TO MAKE SURE YOU ARE NOT USING THE OTHER PORTS ON THE TRANSMITTER
donnie
|
|