New firmware for Mavic Pro has been released（04/05/2017）

SeanOzz

Speed_Freak_039 Posted at 2017-1-29 18:03
Its not available to us yet. People are getting it from the factory.

i got it from factory, then downgraded to test gimbal solution issues and now i am stuck with the old version and gimbal issues. ha ha ha

SeanOzz

No1much Posted at 2017-2-10 14:55
The ,0300 isn't available to the public yet, I believe.

Anyone who doesn't have .0300 on their Mavic right now, as in, it shipped like that and still has that version, cannot get that version, period.

i did have that version, with a request to redo my firmware due to the horrindous gimbal tilt issue i am now stuck with .200 . i assume when i get this returned the new one will again come with .300

i just was hoping maybe going back to my original firmware would help with the gimbal issues i have. oh well.

alirz5

Well this .400 fw doesn't seem to address the crappy video quality problems everyone is having...would have been nice to fix an actual problem for once Dji...

tellus1

Looks like firmware .300 has been skipped as thought.

Mrimstad

No new battery fw with this one?

Dronoob

No battery update for me either. So I guess the answer to your question is: No.

SkyHigh UAV

Mavic Pro Release Notes
http://www.dji.com/mavic
Copyright © 2017 DJI All Rights Reserved. 1
Date : 2017.02.14
Firmware : v01.03.0400
DJI GO 4 App iOS : v4.0.4
DJI GO 4 App Android : v4.0.2
What’s New?
Added a self-diagnostic test function for ultrasonic sensors every time the aircraft is powered on.
Improved the Interval Mode performance.
Upgraded the D-Log color mode to extend dynamic range.
Optimized the video transmission by reducing the transmission signal loss ratio.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
http://www.dji.com/mavic
Copyright © 2017 DJI All Rights Reserved. 2
Date : 2016.12.26
Firmware : v01.03.0200
DJI GO 4 App iOS : v4.0.2
DJI GO 4 App Android : v4.0.1
What’s New?
Improved gimbal performance when flying in low temperatures.
Added Cinematic Mode for smoother the footage, refer to the user manual for details.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
http://www.dji.com/mavic
Copyright © 2017 DJI All Rights Reserved. 3
Date : 2016.12.06
Firmware : v01.03.0000
DJI GO 4 App iOS : v4.0.0
DJI GO 4 App Android : v4.0.0
What’s New?
Added AR route display in TapFly mode when used with the DJI GO 4 app.
Added a vibration warning for the remote controller when the aircraft enters ATTI mode.
Added wind speed evaluation and a high wind speed warning.
Added more film looks and color modes (when used with the DJI GO 4 app).
Improvements:
Optimized the compass algorithm to reduce switching from GPS Mode to ATTI Mode.
Improved magnetic detection for the remote controller. The aircraft will now return to home when
strong magnetic interference is detected.
Improved the speed at which the HD video link connection can be regained after disruption.
Optimized altitude maintenance capabilities when flying over water.
Optimized Gesture Mode.
Improved the indoor flying experience by shortening the minimum distance from an obstacle from 3m
to 1m.
Optimized power management for long-term battery storage.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO 4, and retry.
Mavic Pro Release Notes
http://www.dji.com/mavic
Copyright © 2017 DJI All Rights Reserved. 4
Date : 2016.11.09
Firmware : v01.02.0900
DJI GO App iOS : v3.0.2
DJI GO App Android : v3.0.1
What’s New?
Optimized Remote Controller Calibration.
Adjusted default gimbal pitch smoothing value from 10 to 15 for smoother movement.
Increased USB connection stability.
Adjusted camera color.
Fixed occasional remote control command timeout.
Fixed occasional unresponsiveness to remote controller commands.
Deleted support for using C1 or C2 button to launch the DJI GO app on iOS.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO, and retry.
Mavic Pro Release Notes
http://www.dji.com/mavic
Copyright © 2017 DJI All Rights Reserved. 5
Date : 2016.10.21
Firmware : v01.02.0800
DJI GO App iOS : v3.0.1
DJI GO App Android : v3.0.0
What’s New?
Optimized the Return-to-Home and Landing (refer to the user manual for details).
Reduced descent issue caused from flying indoors to outdoors.
Minimized an overheating issue resulting from not removing the gimbal clamp after powering on the
aircraft.
Improved the stability of the aircraft when switching between Portrait and Landscape.
Optimized the ActiveTrack experience, keeping moving subjects in center frame more effectively and
smoothing footage.
Optimized control parameters to improve the flight experience.
Fixed occasional issue of GPS signal loss.
Notes:
Restart the aircraft and remote controller after upgrade is complete.
If the firmware upgrade fails, restart aircraft, remote controller and DJI GO, and retry.

jpap

Any idea what "Improved the Interval Mode performance." means?

FireMonkey

Please, fix it. windows 10 issue from DJI Assistant

SkyHigh UAV

Installed updated and tested all ok

Flyboyz

jpap Posted at 2017-2-14 00:14
Any idea what "Improved the Interval Mode performance." means?

Yup, also trying to understand what that's mean?

Ivan7

I upgraded from v01.03.0300 to v01.03.0400 and everything went fine. For me there was a required battery update so I did all of mine. 4 of the 5 batteries needed to be updated which seemed a little strange that one did not require an update. Anyhow, will have to take the bird out for a test.

tellus1 · Upgraded to 1.03.0400 and my batteries also required an update.

Upgraded to 1.03.0400 and my batteries also required an update.

Mrimstad

tellus1 Posted at 2017-2-14 01:47
Upgraded to 1.03.0400 and my batteries also required an update.

my guess is you where not on 1.03.0200 already?

PAYBACK

.400 is potatoes without the MEAT!

Highfive

after this update the mavic changes every few seconds (about 5) between Atti and GPS indoors. Before I only had Atti in my flat.
Update: after some restarts the problem is gone

amaviccalledmau

Did the Feb 2017 firmware update. Would not connect to mavic. Uninstalled the app and reinstalled, all was good except there was no camera image on my samsung s5. Turned everything off and back on, still nothing. Hit the playback button and got image back. It's been fine since.

Jay22101

I installed this new firmware update and promptly had a crash.  After completing the update and being ready to fly, I powered the rotors on - and then things started going immediately wrong.

The drone actually lifted off the ground without my command and then wouldn't respond to any controller inputs.  The Mavic immediately starting drifting to the right at a height of about 3 feet and then continued drifting uncontrollably until it cracked into a nearby obstacle and disintegrated all of its rotors.  I've never had an experience like this with the Mavic, so wondering if it has to do with the new firmware!

The drone didn't respond to any inputs as it drifted slowly and crashed - nor did it respond to shut down commands, so I've got a lacerated finger for my troubles in getting the battery out.  Hopefully just broken rotors and nothing more extensive to the drone.

Anyone else having issues with this new firmware as well?

Nees

Where is the changelog for .0300? Now we don't know what was changed in that FW. compared to before and now .400.

DarkEnergy

No problems here. Installed in 20 minutes. Power on OK

fansc81e6605

I just installed this update - now my Mavic seems to stray a little when the controls are not being touched!
Not windy with plenty of satellites locked on? Suggestions?

daivatam

nothing important resolved after another month and half...no yellow spot mentioned...no atti mode ...no art profile reintroduced in dji go...

what the heck is interval mode?

pitchmagic

Jay22101 Posted at 2017-2-14 03:42
I installed this new firmware update and promptly had a crash. After completing the update and being ready to fly, I powered the rotors on - and then things started going immediately wrong.

The drone actually lifted off the ground without my command and then wouldn't respond to any controller inputs. The Mavic immediately starting drifting to the right at a height of about 3 feet and then continued drifting uncontrollably until it cracked into a nearby obstacle and disintegrated all of its rotors. I've never had an experience like this with the Mavic, so wondering if it has to do with the new firmware!

Did you update the controller also?

fans90d4f438

so contrary to what was posted in other threads, DJI Ken, no improvements to fix the rising RTH altitudes that have been documented many times?

Mafia16

Installing the FW right now hope these one handles well

Flavio_SP

As far as I undestand, this firmware update will solve the video signal loss issue that a lot of Mavic users are experiencing, right?

pitchmagic

daivatam Posted at 2017-2-14 05:46
nothing important resolved after another month and half...no yellow spot mentioned...no atti mode ...no art profile reintroduced in dji go...

This?

http://droneownersnetwork.com/hy ... melapse-with-mavic/

R&L Aerial

fans90d4f438 Posted at 2017-2-14 06:10
so contrary to what was posted in other threads, DJI Ken, no improvements to fix the rising RTH altitudes that have been documented many times?

DJI only reports a few major changes in the firmware update notes, I'm sure there are many things that are tweaked so all you can do is update and test.

fans59f4b37d

Jay22101 Posted at 2017-2-14 03:42
I installed this new firmware update and promptly had a crash. After completing the update and being ready to fly, I powered the rotors on - and then things started going immediately wrong.

The drone actually lifted off the ground without my command and then wouldn't respond to any controller inputs. The Mavic immediately starting drifting to the right at a height of about 3 feet and then continued drifting uncontrollably until it cracked into a nearby obstacle and disintegrated all of its rotors. I've never had an experience like this with the Mavic, so wondering if it has to do with the new firmware!

I was flying 20m above my yard when out of nowhere my aircraft disconnected. I tried unplug reboot app. nothing. I still had rc control so I decended and restated the rc. boom my app says my aircraft is back and a update is recommended. so i go ahead. it fails twice. I spent all day trying to update downgrade. eventually bricked my mavic. my remote nor the app would find it. then after hours of trying I eventually got it updated.. Not smooth at all. I have yet to fly with the new fw tho.

fans90d4f438

fans59f4b37d Posted at 2017-2-14 06:54
I was flying 20m above my yard when out of nowhere my aircraft disconnected. I tried unplug reboot app. nothing. I still had rc control so I decended and restated the rc. boom my app says my aircraft is back and a update is recommended. so i go ahead. it fails twice. I spent all day trying to update downgrade. eventually bricked my mavic. my remote nor the app would find it. then after hours of trying I eventually got it updated.. Not smooth at all. I have yet to fly with the new fw tho.

android or IOS? Im guessing..Android

fans59f4b37d

fans90d4f438 Posted at 2017-2-14 07:15
android or IOS? Im guessing..Android

yea android. First glitch ive had sofar

bitboy0 - mavic

Ivan7 Posted at 2017-2-14 01:23
I upgraded from v01.03.0300 to v01.03.0400 and everything went fine. For me there was a required battery update so I did all of mine. 4 of the 5 batteries needed to be updated which seemed a little strange that one did not require an update. Anyhow, will have to take the bird out for a test.

Please check out one thing:
Take that exact battery, that don't need an Update. Connect that without the hub to the charger till it's full.
Normally it should switch OFF after charging. I guess it will stay ON instead.

I also have one battery with this behavior. http://forum.dji.com/forum.php?mod=viewthread&tid=84995

MikeQView

I really Wish DJI, would produce one flying APP for the Mavic that had the bare essentials and that was RELIABLE, then lock that up ! and then they ought to continue with Go4 as they are now, so every one has a choice of using a bare app for reliability and then have the option of being a beta tester if they wish, i am a flying proffesional now faced with a serious decision to go with a more reliable manufacturer, selling my three DJI machines as i feel i cant trust the flight App any more, luckily i have managed to remove the internet from the tablet that is locked with my inspire, it is reliable as is, with its version of GO3 etc , but this now seriously limits the use of maps and live stream and cant use the tablet for anything else, am i frustrated or what ! ! ! its like owning a Lamborghini and then being told that you cant use the built in sat nav, or the signal indicators, or the electronic speedo or rev counter as none of it may be acurate ??????? PLEASE DJI , MAKE A RELIABLE APP, BEFORE YOU START LOOSING MARKET SHARE ! people will eventually start voting with their feet.

photoboy

DID they FIX the WATER COLOR ISSUE?????

fans59f4b37d

everyone else seems not have any issues during the update.
I truly believe only version .0300 users who were flying at the time dji pushed the ota update to the dji go 4 app were affected..

I try update to 0400 it fails but remote updates. assistant 2 also fails. I was able to downgrade both to 0200 then update to 0400. using the dji app for android. I tried absolutly everything. tried upgrading atleast 20 times to no avail. eventually bricked my mavic ! No rc connection or pc usb. But it randomly rebooted 20 mins later and the app said updating. took about 20 seconds. back to life. all running v.0400.

I will never jump on a update early again. I will also fly with airplane mode on to avoid dji pushing a update mid flight and ruin my life.

fans7c87d8ba

Do you have to install each battery to aircraft to update the battery?

Ivan7

bitboy0 - mavic Posted at 2017-2-14 07:17
Please check out one thing:
Take that exact battery, that don't need an Update. Connect that without the hub to the charger till it's full.
Normally it should switch OFF after charging. I guess it will stay ON instead.

Thanks for the guidance. I will test that now and see. Never had a problem charging any of my batteries but I only ever used the hub.

fans90d4f438

fans59f4b37d Posted at 2017-2-14 07:16
yea android. First glitch ive had sofar

just seems like the whole DJI Mavic experience is first geared towards IOS, with Android being secondary. From my experiences, the app and associated factors just work so much more smoothly/troublefree (but not 100% perfect) with IOS than android

fans59f4b37d

fans90d4f438 Posted at 2017-2-14 08:11
just seems like the whole DJI Mavic experience is first geared towards IOS, with Android being secondary. From my experiences, the app and associated factors just work so much more smoothly/troublefree (but not 100% perfect) with IOS than android

Yea I do trust the ios platform is a hell of allot more stable. I have not had an issue up till now tho.,atleast 40 flights with s6 edge +. Runs smooth. Just did not like the update they pushed yesterday

Ivan7

Ivan7 Posted at 2017-2-14 07:53
Thanks for the guidance. I will test that now and see. Never had a problem charging any of my batteries but I only ever used the hub.

Looks like I have the same issue you mentioned. It will not switch off after charge completed when charging without the hub. I will add my comments into your other thread.